e10vk
UNITED STATES SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
Form 10-K
|
|
|
þ |
|
ANNUAL REPORT PURSUANT TO SECTION 13 or 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 |
For the Fiscal year ended December 31, 2005
OR
|
|
|
o |
|
TRANSITION REPORT PURSUANT TO SECTION 13 or 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 |
Commission File Number 1-13884
COOPER CAMERON CORPORATION
(Exact name of Registrant as specified in its charter)
|
|
|
Delaware
(State or other jurisdiction of incorporation or organization)
1333 West Loop South
|
|
76-0451843
(I.R.S. Employer Identification No.) |
Suite 1700
Houston, Texas
(Address of principal executive offices)
|
|
77027
(Zip Code) |
Registrants telephone number, including area code (713) 513-3300
SECURITIES REGISTERED PURSUANT TO SECTION 12(b) OF THE ACT:
|
|
|
Title of Each Class
|
|
Name of Each Exchange on Which Registered |
|
|
|
Common Stock, Par Value $0.01 Per Share
|
|
New York Stock Exchange |
|
|
|
Junior Participating Preferred Stock
Purchase Rights
Par Value $0.01 Per Share
|
|
New York Stock Exchange |
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule
405 of the Securities Act. Yes þ No o
Indicate by check mark if the registrant is not required to file reports pursuant to Section
13 or Section 15(d) of the Act. Yes o No þ
Indicate by check mark whether the registrant (1) has filed all reports required to be filed
by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or
for such shorter period that registrant was required to file such reports), and (2) has been
subject to such filing requirements for the past 90 days. Yes þ No o
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation
S-K is not contained herein, and will not be contained, to the best of registrants knowledge, in
definitive proxy or information statements incorporated by reference in Part III of this Form 10-K
or any amendment to this Form 10-K. o
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated
filer, or a non-accelerated filer. See definition of accelerated filer and large accelerated
filer in Rule 12b-2 of the Exchange Act. (Check one):
|
|
|
|
|
Large accelerated filer þ
|
|
Accelerated filer o
|
|
Non-accelerated filer o |
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of
the Act). Yes o No þ
The aggregate market value of the Common Stock, par value $0.01 per share, held by
non-affiliates of registrant as of June 30, 2005, our most recently completed second fiscal
quarter, was approximately $2,929,537,991. For the purposes of the determination of the
above statement amount only, all directors and executive officers of the registrant are presumed to
be affiliates. The number of shares of Common Stock, par value $.01 per share, outstanding as of
February 16, 2006, was 115,953,934.
DOCUMENTS INCORPORATED BY REFERENCE
Portions of registrants Annual Report to Stockholders for the year ended December 31, 2005
are incorporated by reference into Parts I and II. Portions of the registrants 2006 Proxy
Statement for the Annual Meeting of Stockholders to be held May 5, 2006 are incorporated by
reference into Part III.
PART I
ITEM 1. BUSINESS
Cooper Cameron Corporation (Cooper Cameron or the Company) is a leading international
manufacturer of oil and gas pressure control and separation equipment, including valves, wellheads,
controls, chokes, blowout preventers and assembled systems for oil and gas drilling, production and
transmission used in onshore, offshore and subsea applications and provides oil and gas separation,
metering and flow measurement equipment.. Cooper Cameron is also a manufacturer of centrifugal air
compressors, integral and separable gas compressors and turbochargers. See Glossary of Terms at
the end of Item 1 for definitions of certain terms used in this section. Any reference to Cooper
Cameron Corporation, its divisions or business units within this paragraph or elsewhere within this
Form 10-K as being a leader, leading provider, leading manufacturer, or having a leading position
is based on the amount of equipment installed worldwide and available industry data.
Cooper Camerons origin dates back to the mid-1800s with the manufacture of steam engines that
provided power for plants and textile or rolling mills. By 1900, with the discovery of oil and gas,
Cooper Camerons predecessors moved into the production of internal combustion engines and gas
compressors. Product offerings were added by the Companys predecessors through various
acquisitions, in particular the acquisitions of The Bessemer Gas Engine Company (gas engines and
compressors); Pennsylvania Pump and Compressor (reciprocating air and gas compressors); Ajax Iron
Works (compressors); Superior (engines and compressors); Joy Petroleum Equipment Group (valves,
couplings and wellheads); Joy Industrial Compressor Group (compressors); and Cameron Iron Works
(blowout preventers, ball valves, control equipment and McEvoy-Willis wellhead equipment and choke
valves).
Cooper Cameron, a Delaware corporation, was incorporated on November 10, 1994. The Company
operated as a wholly-owned subsidiary of Cooper Industries, Inc. until June 30, 1995, the effective
date of the completion of an exchange offer with Cooper Industries stockholders resulting in the
Company becoming a separate stand-alone company. The common stock of Cooper Cameron trades on the
New York Stock Exchange under the symbol CAM. The Companys Internet address is
www.coopercameron.com. General information about Cooper Cameron, including its Corporate Governance
Principles, charters for the committees of the Companys board of directors, Standards of Conduct,
and Codes of Ethics for Senior Officers and Directors, can be found in the Ethics and Governance
section of the Companys website. The Company makes available, free of charge, on its website the
annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and
amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities
and Exchange Act of 1934, as amended (the Exchange Act) as soon as reasonably practicable after
the Company electronically files or furnishes them to the Securities and Exchange Commission (the
SEC).
Since its inception, the Company has completed several acquisitions, including the assets of
Ingram Cactus Company and the interests in the Ingram Cactus joint ventures in Venezuela and
Malaysia, Orbit Valve International Inc., Stewart and Stevensons Petroleum Equipment segment,
Nutron Industries, Petreco International Inc., and the PCC Flow Technologies segment of Precision
Castparts Corp. (PCC).
In May 2005, the Company acquired NuFlo Technologies, Inc. (NuFlo), a Houston-based supplier
of metering and related flow measurement equipment, for approximately $121.3 million in cash and
assumed debt. NuFlo produces and distributes measurement and control instrumentation for the oil
and gas industry, and has manufacturing facilities in the United States, Canada and the United
Kingdom. The financial results of NuFlo are reported in the Cooper Cameron Valves (CCV) segment.
On September 1, 2005, the Company announced it had agreed to acquire substantially all of the
On/Off value business unit of the Flow Control segment of Dresser, Inc. On November 30, 2005, the
Company completed the acquisition of all of these businesses other than a portion of the business
which was acquired on January 10, 2006. The total acquisition cost for these businesses was
approximately $217.5 million in cash and assumed debt. The businesses acquired serve customers in
the worldwide oil and gas production, pipeline and process markets and will be integrated primarily
into the CCV segment. Their product offerings include ball valves, check valves, actuators, gate
valves and plug valves. Product brands include Grove, TK and Wheatley, among others. The businesses
acquired have facilities in Italy, Canada, Germany, the Netherlands, the United Kingdom, Brazil and
the United States.
3
Business Segments
Markets and Products
The Companys operations are organized into three separate business segments Cameron, CCV
and Cooper Compression. For additional business segment information for each of the three years in
the period ended December 31, 2005, see Note 14 of the Notes to Consolidated Financial Statements,
which Notes are incorporated herein by reference (Notes to Consolidated Financial Statements).
Cameron Division
Cameron is one of the worlds leading providers of systems and equipment used to control
pressures and direct flows of oil and gas wells. Its products are employed in a wide variety of
operating environments including basic onshore fields, highly complex onshore and offshore
environments, deepwater subsea applications and ultra-high temperature geothermal operations.
Camerons products include surface and subsea production systems, blowout preventers, drilling
and production control systems, oil and gas separation equipment, gate valves, actuators, chokes,
wellheads, drilling riser and aftermarket parts and services. Camerons products are marketed under
the brand names Cameron®, W-K-M®, McEvoy® and Willis®. Additionally, Cameron manufactures
elastomers, which are used in pressure and flow control equipment and other petroleum industry
applications, as well as in the petroleum, petrochemical, rubber molding and plastics industries.
Cameron is one of the leading global suppliers of integrated drilling systems for land,
offshore, platform and subsea applications. Drilling equipment designed and manufactured by
Cameron includes ram and annular blowout preventers (BOPs), drilling risers, drilling valves, choke
and kill manifolds, surface and subsea BOP control systems, multiplexed electro-hydraulic (MUX)
control systems, and diverter systems. Cameron also provides services under CAMCHEC, an
inspection system that allows drilling contractors to inspect drilling riser on their rigs offline,
saving time and money on maintenance and unnecessary transportation.
During 2005, Cameron upgraded several drilling aftermarket locations with new machine tools,
including Berwick, Louisiana; Oklahoma City, Oklahoma; Macea, Brazil and Vera Cruz, Mexico. The
Rock Springs, Wyoming facility will also be upgraded and expanded to address the growing natural
gas market in the Northern Rockies.
Cameron is also a global market leader in supplying surface equipment, including wellheads,
Christmas trees and chokes used on land or installed on offshore platforms. During 2005, Cameron
provided equipment to new developments in Azerbaijan, Sakhalin Island, Russia and North Africa.
Cameron continued to deliver new surface technology, including Camerons premier land and platform
wellhead system, the SSMC model, and Camerons Conductor Sharing Wellheads, which allow multiple
completions in a single well slot, to its traditional U.K. North Sea customers. Cameron also
supplied wellhead systems in Qatar, Abu Dhabi, Saudi Arabia, Indonesia, Australia and New Zealand.
The 2004 acquisition by the Company of certain assets and businesses of PCC brought with it
PCC Sterom, now Sterom S.A. Steroms plant in Romania manufactures wellheads and valves providing
Cameron with significant incremental competitively priced surface product manufacturing capacity.
Cameron continues to be a leader in providing subsea wellheads, Christmas trees, manifolds and
production controls, as well as complete production systems to the subsea industry. Camerons
Subsea Systems organization, created in 2005, has global responsibility for research and
development, engineering, sales, manufacturing, installation and aftermarket support for subsea
products and systems, and provides customers with integrated solutions to subsea field development
requirements under engineering, procurement and construction contracts.
Cameron completed a total of 100 subsea trees during 2005. Capacity expansions in Leeds,
England, Taubate, Brazil and Berwick, Louisiana provide support for future increases in completions
of subsea trees and associated manifolds, production controls and other equipment.
As petroleum exploration activities have increasingly focused on subsea locations, Cameron has
directed much of its new product development efforts toward this market. Camerons patented
SpoolTree horizontal subsea production system, which was introduced in 1993, is used in oil and
gas fields with subsea completions that require frequent retrieval of downhole equipment. With the
SpoolTree system, well completion and workover activities can be performed without a workover riser
or removal of the Christmas
4
tree and under conventional blowout preventer control, thereby reducing the time, equipment
and expense needed to perform such activities. Cameron advanced its tradition of innovation with
the introduction in 2004 of an all-electric, direct current powered subsea production system,
CameronDC, which is designed to offer greater reliability and provide substantial cost savings to
customers.
Camerons Flow Control group was formed to focus resources on the choke product line with the
goal of enhancing Camerons performance in this product line. Flow Control manufactures Cameron and
Willis brand chokes and Cameron brand actuators for the surface and subsea production and drilling
markets as well as drilling choke control panels and surface wellhead safety systems. The Companys
primary choke manufacturing operations are located in Longford, Ireland, and its primary surface
gate valve actuator manufacturing operations are located at the Flow Control plant in Houston,
Texas.
In 2005, Flow Control sold its first electric surface actuator, which offers operators an
actuation package which reduces the costs and maintenance problems
associated with hydraulic power units and hydraulic tubing runs. Also during 2005, Flow Control
introduced a new three-inch underbalanced drilling choke, the DR30, in response to drilling
customers increasing demand for higher-capacity chokes for use in underbalanced drilling
applications.
With the Companys acquisition of Petreco, Cameron assumed a leading position in the surface
oil and gas separation business and gained an opportunity to develop a subsea processing business.
Petrecos products include electrostatic desalters and dehydrators, hydrocyclones, desanders,
floatation equipment, processing equipment, gas processing equipment and electrochlorinators. These
products are marketed under the brand names Petreco®, Vortoil®, Krebs®, Unicel®, Wemco®, Metrol,
KCC, Depurator® and BFCC.
Camerons worldwide aftermarket service program, CAMSERV, provides replacement parts for
equipment through a comprehensive global network. In recent years, Cameron has continued to enhance
its aftermarket presence worldwide with new facilities in Brazil, Mexico, Angola, Newfoundland, and
Onne Port, Nigeria.
Camerons research center, located in Houston, Texas, has ten specially designed test bays to
test and evaluate Camerons products under realistic conditions. These include environmental test
chambers to simulate extreme pressures and temperatures, high-strength fixtures for the application
of multi-million pound tensile and bending loads, high-pressure gas compressors and test
enclosures, a hyperbaric chamber to simulate the external pressures of deepwater environments, and
two circulation loops for erosion and flow testing.
Cameron primarily markets its products directly to end-users through a worldwide network of
sales and marketing employees, supported by agents in some international locations. Due to the
technical nature of many of the products, the marketing effort is further supported by a staff of
engineering employees.
Camerons primary customers include oil and gas majors, national oil companies, independent
producers, engineering and construction companies, drilling contractors, rental companies and
geothermal energy producers.
Cooper Cameron Valves Division
CCV is a leading provider of valves and related systems primarily used to control pressures
and direct the flow of oil and gas as they are moved from individual wellheads through flow lines,
gathering lines and transmission systems to refineries, petrochemical plants and industrial centers
for processing. Equipment used in these environments is generally required to meet demanding
standards, including API 6D and the American Society of Mechanical Engineers (ASME).
CCVs products include gate valves, ball valves, butterfly valves, Orbit valves, rotary
process valves, block & bleed valves, plug valves, globe valves, check valves, actuators, chokes
and aftermarket parts and services. These products are marketed under
the brand names Cameron®, W-K-M®, Orbit®, Demco®, Foster®, NAVCO®, Nutron®, Thornhill
Craver and TruSeal®. During the first
quarter of 2000, CCV expanded its field service capabilities with the acquisition of Valve Sales
Inc., a Houston-based valve repair and manufacturing company. Nutron, a Canadian valve
manufacturer, was acquired in December 2002 in order to further expand CCVs product offerings,
particularly in Canada.
With the Companys acquisition of certain businesses and assets of PCC in 2004, CCV acquired a
wider range of product offerings, including the double-block and bleed TwinSeal line, the TBV
high-end ball valves intended for use in cryogenic and other severe service applications, and the
Techno check valves. The business lines acquired include General Valve, AOP Industries,
5
TBV Techno and the former PCC Ball Valve Italy, which brings to CCV, a leader in welded ball
valves, a wide range of take-apart bolted body ball valves.
NuFlo, acquired in 2005, designs, manufactures and distributes measurement and control
instrumentation for the global oil and gas and process control industries.
The acquisition of the On/Off valve business unit of the Flow Control segment of Dresser, Inc.
was essentially completed in late 2005, with a closing on one facility occurring in January 2006.
Notable product brands acquired in this transaction included GroveÒ, EntechÒ,
International Valves Ltd. (U.K.), WheatleyÒ, LedeenÒ, TexsteamÒ plug valves,
Ring-OÒ, Tom WheatleyÔ, TKValveÒ and Control SealÔ. This acquisition,
along with others during the past couple of years, gives CCV a premier market position with an
expanded international customer base.
CCV markets its equipment and services through a worldwide network of combined sales and
marketing employees, distributors and agents in selected international locations. Due to the
technical nature of many of the products, the marketing effort is further supported by a staff of
engineering employees. New brand offering from the Dresser acquisition include Texstream plug
valves and Wheatley check valves. The acquisition also added the Valgro (Canada) and International
Valves Ltd. (U.K.) operations, thereby improving the channels to market.
CCVs primary customers include oil and gas majors, independent producers, engineering and
construction companies, pipeline operators, drilling contractors and major chemical, petrochemical
and refining companies.
Cooper Compression Division
Cooper Compression was created in 2002 through the combination of Cooper Energy Services (CES)
and Cooper Turbocompressor (CTC). The business is divided into Reciprocating Technology, which
encompasses the products and services historically provided by CES, and Centrifugal Technology,
which encompasses the air and gas compression markets traditionally served by CTC.
Cooper Compression is a provider of reciprocating and centrifugal compression equipment and
aftermarket parts and services. Reciprocating compression equipment (Reciprocating Technology) is
used throughout the energy industry by gas transmission companies, compression leasing companies,
oil and gas producers and independent power producers. Integrally geared centrifugal compressors
(Centrifugal Technology) are used by customers around the world in a variety of industries,
including air separation, petrochemical and chemical. Cooper Compressions products include
aftermarket parts and services, integral reciprocating engine-compressors, reciprocating separable
compressors, turbochargers, integrally geared centrifugal compressors, compressor systems and
controls. Its aftermarket services include spare parts, technical services, repairs, overhauls and
upgrades.
Cooper
Compressions products and services are marketed under the Ajax®, Superior®,
Cooper-Bessemer®, Penn, Enterprise, Texcentric®, Compression Specialties, Turbine Specialties
(reciprocating products) and Turbo Air®, Genuine Joy® (aftermarket parts only), DryPak, TA and
MSG® (centrifugal products) brand names. Cooper Compression provides global support for its
products and maintains sales and/or service offices in key international locations.
Reciprocating Technology
Cooper Compression provides Ajax integral engine-compressors (140 to 880 horsepower), which
combine the engine and compressor on a single drive shaft, and are used for gas re-injection and
storage, as well as on smaller gathering and transmission lines. In addition, a 1,800 RPM separable
compressor, featuring low vibration and couple-free design features, was significantly upgraded
during 2004 to enhance its efficiency and was launched in 2005 in the compressed natural gas
market. These compressors (100 to 280 horsepower) are also sold in gas gathering, drilling and
compressed natural gas markets.
Superior reciprocating compressors (100 to 9,000 horsepower) are used primarily for natural
gas applications, including production, storage, withdrawal, processing and transmission, as well
as petrochemical processing. These high-speed separable compressor units can be matched with either
natural gas engine drivers or electric motors and provide a cost advantage over competitive
equipment in the same power range. Cooper Compression markets a compressor cylinder line that
provides customers better operating flexibility under the RAM trade name. Additionally, a new
line of compressor frames was developed and launched in 2005.
6
There is an installed base of Cooper-Bessemer, Penn, Enterprise, Superior, Ajax and Joy
engines and compressors (up to 30,000 horsepower) for which Cooper Compression provides replacement
parts and service on a worldwide basis. During 2004, an expansion to the Companys industry-leading
turbocharger capabilities was completed, providing expanded services and faster product
deliverability. Cooper Compressions channel to market utilizes a distributor network in North
America for new reciprocating compressors and direct selling for most international customers to
provide maximum exposure for the Companys products.
Cooper Compressions primary customers in reciprocating technology include gas transmission
companies, compression leasing companies, oil and gas producers and processors and independent
power producers.
Centrifugal Technology
Cooper Compression also manufactures and supplies integrally geared centrifugal compressors
and aftermarket services to customers worldwide. Centrifugal air compressors, used primarily in
manufacturing processes (plant air), are sold under the trade name of Turbo Air, with specific
models including the TA-2000, TAC-2000, TA-2020, TA-3000, TA-6000, and TA-9000. Engineered
compressors are used in the process air and gas industries and are identified by the trade name
MSG.
The process and plant air centrifugal compressors deliver oil-free compressed air and other
gases to the customer, thus preventing oil contamination of the finished products. Worldwide
customers increasingly prefer oil-free air for quality, safety, operational and environmental
reasons.
Cooper Compression provides installation and maintenance service, parts, repairs, overhauls
and upgrades to its worldwide customers for plant air and process gas compressors. It also provides
aftermarket service and repairs on all equipment it produces through a worldwide network of
distributors, service centers and field service technicians utilizing an extensive inventory of
parts.
Cooper Compressions customers in centrifugal technology are petrochemical and refining
companies, natural gas processing companies, durable goods manufacturers, utilities, air separation
and chemical companies.
Market Issues
Cooper Cameron is one of the leaders in the global market for the supply of petroleum
production equipment. Cooper Cameron believes that it is well-positioned to serve these markets.
Plant and service center facilities around the world in major oil- and gas-producing regions
provide a broad market coverage.
The global market continues to be a source of growth for Cooper Cameron. The desire to expand
oil and gas resources and transmission capacity in developed and developing countries, for both
economic and political reasons, continues to be a major factor affecting market demand.
Additionally, establishment of industrial infrastructure in the developing countries will
necessitate the growth of basic industries that require plant air and process compression
equipment. Production and service facilities in North and South America, Europe, the Far and Middle
East and West Africa provide the Company with the ability to serve the global marketplace.
In each of Cooper Camerons business segments, a large population of installed engines,
compression equipment and oil and gas production equipment exists in the worldwide market. The
long-lived nature of the equipment provides a relatively stable repair parts and service business.
However, with respect to Cooper Compression, approximately 35% of that segments revenues come from
the sale of replacement parts for equipment that the Company no longer manufactures. Many of these
units have been in service for long periods of time and are gradually being replaced. As this
installed base of legacy equipment declines, the Companys potential market for parts orders is
also reduced. In recent years, the Companys revenues from replacement parts associated with legacy
equipment have declined nominally. Notwithstanding this, significant product development and
service attention is directed toward this legacy population in order to keep them in service.
Retrofits targeted to emissions reduction, efficiency improvement and safety remain areas of focus.
In recent years, the Companys Cameron Division has been expanding into the deepwater subsea
systems market. This market is significantly different from the Companys other markets since
deepwater subsea systems projects are significantly larger in scope and complexity, in terms of
both technical and logistical requirements. Deepwater subsea projects (i) typically involve long
lead times, (ii) typically are larger in financial scope, (iii) typically require substantial
engineering resources to meet the technical requirements of the project and (iv) often involve the
application of existing technology to new environments and, in some cases, the application of new
technology. These projects accounted for nearly 7% of revenues in 2005.
7
In 2005, Cameron and Petreco formed a joint technology development team to pursue market
opportunities in the subsea processing area. The group is focused on leveraging Camerons proven
capabilities in subsea equipment design and Petrecos well-established processing and separation
technology for seabed applications.
Geographic Breakdown of Revenues
Revenues for the years ended December 31, 2005 and 2004 were generated from shipments to the
following regions of the world (dollars in thousands):
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Increase |
|
Region |
|
2005 |
|
|
2004 |
|
|
(Decrease) |
|
North America |
|
$ |
1,145,881 |
|
|
$ |
859,126 |
|
|
$ |
286,755 |
|
South America |
|
|
141,845 |
|
|
|
89,726 |
|
|
|
52,119 |
|
Asia, including Middle East |
|
|
486,767 |
|
|
|
390,374 |
|
|
|
56,393 |
|
Africa |
|
|
348,206 |
|
|
|
438,060 |
|
|
|
(89,854 |
) |
Europe |
|
|
359,417 |
|
|
|
292,775 |
|
|
|
66,642 |
|
Other |
|
|
35,731 |
|
|
|
22,784 |
|
|
|
12,947 |
|
|
|
|
|
|
|
|
|
|
|
|
|
$ |
2,517,847 |
|
|
$ |
2,092,845 |
|
|
$ |
425,002 |
|
|
|
|
|
|
|
|
|
|
|
New Product Development
Cameron introduced several drilling products during the last several years. These products
include the 3.5 million-pound load capacity LoadKing riser system, used for drilling in up to
10,000-foot water depths; a lightweight and lower-cost locking mechanism for subsea BOPs; a new
generation of variable-bore ram packers; a Freestanding Drilling Riser, and an Environmental Safe
Guard system.
Other Cameron-developed products include the patented SpoolTreeÔ subsea production
system; the CAMTROL system that includes all of Camerons controls capabilities of production,
drilling and workover; and the CameronDC subsea production system, which is the worlds first
all-electric direct current-powered subsea production system, designed for increased reliability
and improved performance in deepwater applications.
During 2005, Cameron introduced a new subsea controls system that combines the traditional
subsea control module and the subsea accumulator module in a single package, allowing for more
efficient operation of the subsea tree and manifold valves. Additionally, a new state-of-the-art
subsea test chamber in Camerons controls engineering facility in Celle, Germany facilitates
testing of the Companys control systems.
Also in 2005, Cameron launched its updated CAMTROL subsea control module, which includes new
electronics, lower power demand, a DC power option and fiber optic communications to further
increase reliability and enable extended offset developments and high-bandwidth intelligent
completions.
During 2005, Flow Control introduced a new three-inch underbalanced drilling choke, the DR30,
in response to drilling customers increasing demand for higher-capacity chokes for use in
underbalanced drilling applications.
CCV-developed products include a range of 2 to 16 ball valves capable of performing at
pressures of 10,000 psi and in water depths of 10,000 feet, and an actuator named ActraCam that
operates its all-welded Cameron ball valve.
Cooper Compressions product range was expanded through the addition of compressor frames
(TAC-2000, TA-2020, TA-3000, TA-6000 and TA-9000) and the addition of trademarked accessories such
as Dry Pak heat of compression dryers and Turboblend, a
8
hydro-cracked turbomachinery lubricating oil. Cooper Compressions Engineered Compressor
product line was redefined and the MSG Renaissance program was introduced to update the MSG product
line.
Cooper Compression has focused product development resources to further expand its
high-efficiency plant air compressor line and to provide engineered compressors matched to the
requirements of its customers. The latter is being achieved by advances in aerodynamic and rotor
dynamic analytical design capability and the addition of centrifugal gas applications.
Two new offerings were introduced in 2005 in the reciprocating product line. The AXIS
reciprocating compressor is an all-new barrel-frame design targeted at the natural gas lease fleet
markets. The new C-Force compressor was created through the addition of new tandem cylinders to a
small Superior reciprocating frame, providing an offering ideally suited to compressed natural gas
applications.
Another new development by Cooper Compression for aftermarket applications is a magnetic,
springless poppet valve for use in reciprocating compressors. The new Magneta valve is designed to
replace springs one of the leading failure components in reciprocating compressors with a
magnet and will be field tested and offered commercially in 2006.
Competition
Cooper Cameron competes in all areas of its operations with a number of other companies, some
of which have financial and other resources comparable to or greater than those of Cooper Cameron.
Cooper Cameron has a leading position in the petroleum production equipment markets,
particularly with respect to its high-pressure products. In these markets, Cooper Cameron competes
principally with Aker Kvaerner, Balon Corporation, Circor International, Inc., Daniel Flow
Measurement Division of Emerson Process Management, Dril-Quip, Inc., FlowServ Corp., FMC
Technologies, Inc., GE Oil & Gas Group, Hanover Compressor Company, Hydril Company, Masterflo (a
division of Steam-Flo Industries Ltd.), NATCO Group, Inc., National Oilwell Varco Inc., PBV-USA,
Inc. (a Zy-Tech Global Industries company), Petrovalve (a Flotek Industries, Inc. company),
Pibiviese, T3 Energy Services Inc., Tyco International Ltd., Valve Automation division of Emerson
Process Management, Vetco International, Ltd., Wood Group and Worldwide Oilfield Machinery, Inc.
The principal competitive factors in the petroleum production equipment markets are
technology, quality, service and price. Cooper Cameron believes several factors give it a strong
competitive position in these markets. Most significant are Cooper Camerons broad product
offering, its worldwide presence and reputation, its service and repair capabilities, its expertise
in high-pressure technology and its experience in alliance and partnership arrangements with
customers and other suppliers.
Cooper Cameron also has a strong position in the compression equipment markets. In these
markets, Cooper Cameron competes principally with the Ariel Corporation, Atlas-Copco AB, CECO (a
Compressor Engineering Corporation company), Demag, Dresser Rand Company, FS-Elloitt Company, LLC,
Endyn Energy Dynamics, Hoerbiger Group, IR Air Solutions, TCS and Universal Compression. The
principal competitive factors in the compression equipment markets are engineering and design
capabilities, product performance, reliability and quality, service and price. Cooper Cameron has a
competent engineering staff and skilled technical and service representatives.
Manufacturing
Cooper Cameron has manufacturing facilities worldwide that conduct a broad variety of
processes, including machining, fabrication, assembly and testing, using a variety of forged and
cast alloyed steels and stainless steel as the primary raw materials. In recent years, Cooper
Cameron has rationalized plants and products, closed various manufacturing facilities, moved
product lines to achieve economies of scale, and upgraded other facilities. This is an ongoing
process as the Company seeks ways to improve delivery performance and reduce costs. Cooper Cameron
maintains advanced manufacturing, quality assurance and testing equipment geared to the specific
products that it manufactures and uses process automation in its manufacturing operations.
Manufacturing facilities typically utilize computer-aided, numeric-controlled tools and
manufacturing techniques that concentrate the equipment necessary to produce similar products in
one area of the plant in a configuration commonly known as a manufacturing cell. One operator in a
manufacturing cell can monitor and operate several machines, as well as assemble and test products
made by such machines, thereby improving operating efficiency and product quality.
9
Cooper Camerons test capabilities are critical to its overall processes. The Company has the
capability to test most equipment at rated operating conditions, measuring all operating
parameters, efficiency and emissions. All process compressors for air separation and all plant air
compressors are given a mechanical and aerodynamic test in a dedicated test center prior to
shipment.
All of Cooper Camerons Asian, European and Latin American manufacturing plants are ISO
certified and API licensed and most of the U.S. plants are ISO certified. ISO is an internationally
recognized verification system for quality management.
Backlog
Cooper
Camerons backlog was approximately $2.156 billion at December 31, 2005, (approximately
85% of which is expected to be shipped during 2006) as compared to $1.000 billion at December 31,
2004, and $946.6 million at December 31, 2003. Backlog consists of customer orders for which a
purchase order has been received, satisfactory credit or financing arrangements exist and delivery
is scheduled.
Patents, Trademarks and Other Intellectual Property
As part of its ongoing research, development and manufacturing activities, Cooper Cameron has
a policy of seeking patents when appropriate on inventions involving new products and product
improvements. Cooper Cameron owns 295 unexpired United States patents and 522 unexpired foreign
patents. During 2005, 17 new U.S. and 28 new foreign patent applications were filed.
Although in the aggregate these patents are of considerable importance to the manufacturing of
many of its products, Cooper Cameron does not consider any single patent or group of patents to be
material to its business as a whole.
Trademarks are also of considerable importance to the marketing of Cooper Camerons products.
Cooper Cameron considers the following trade names to be material to its business as a whole:
Cameron, Cooper-Bessemer, Ajax, Willis and W-K-M. Other important trademarks used by Cooper Cameron
include AOP®, BFCC, C-B Turbocharger, CAMCHEC, CameronDC, Demco, Depurator, DryPak,
Dynacentric, Dynaseal, Enterprise, Foster, Genuine Joy, H & H, KCC, Krebs, McEvoy, Metrol, MSG,
NAVCO®, Nickles Industrial, Nutron®, Orbit, Penn, Petreco, POW-R-SEAL, Quad 2000, SAF-T-SEAL,
SpoolTree, Superior, TA, TBV, Techno, Texcentric, Thornhill Craver, TruSeal, Turbine Specialties
(Reciprocating Products), Turbo Air, TwinSeal, Unicel, VANTAGE, Vortoil and Wemco.
During 2005, the Company acquired NuFlo and certain businesses included within the Flow
Control segment of Dresser, Inc. These acquisitions included the trademarks Barton, Control Seal,
Entech®, Grove®, International Valves Ltd. (U.K.), Ledeen®, NuFlo Technologies, Inc., Ring-O®, TK
Valve®, Texstream®, Tom Wheatley, Wheatley® and others.
Cooper Cameron has the right to use the trademark Joy on aftermarket parts until November
2027. Cooper Cameron has registered its trademarks in the countries where such registration is
deemed important.
Cooper Cameron also relies on trade secret protection for its confidential and proprietary
information. Cooper Cameron routinely enters into confidentiality agreements with its employees,
partners and suppliers. There can be no assurance, however, that others will not independently
obtain similar information or otherwise gain access to Cooper Camerons trade secrets.
Employees
As of December 31, 2005, Cooper Cameron had approximately 12,200 employees, of which
approximately 2,849 were represented by labor unions. Nearly 1,100 of these employees are covered
by contracts expiring in 2006, nearly one-half of which relate to employees in Italy that were
added through the late 2005 acquisition of certain businesses included within the Flow Control
segment of Dresser, Inc. Approximately 285 employees at a Cooper Compression plant in Buffalo, New
York and a Cameron facility in Brookshire, Texas, who are members of the International Association
of Machinists and Aerospace Workers Union, have contracts expiring in the summer of 2006. Other
contracts expiring in 2006 cover approximately 1,200 Cameron and CCV
employees in Brazil, Italy, Venezuela
and Romania.
On July 1, 2005, a new two-year agreement was reached with the Shipbuilding and Marine
Engineering Employees Union covering approximately 132 employees at the Companys operations in
Singapore, and a new one-year agreement was reached on December 1, 2005 with MISF covering
approximately 100 office employees at the Companys U.K. facility in Leeds. A new 3-1/2
10
year agreement was signed effective January 1, 2006, with the AMICUS labor union in Leeds,
which covers an additional 334 hourly employees.
Executive Officers of the Registrant
|
|
|
Name and Age |
|
Present Principal Position and Other Material Positions Held During Last Five Years |
Sheldon R. Erikson (64)
|
|
President and Chief Executive Officer since January 1995 and Chairman of the Board of Directors
since May 1996. Chairman of the Board from 1988 to April 1995 and President and Chief Executive
Officer from 1987 to April 1995 of The Western Company of North America. |
|
|
|
Franklin Myers (53)
|
|
Senior Vice President of Finance and Chief Financial Officer since January 2003. Senior Vice
President from July 2001 to January 2003, Senior Vice President and President of the Cooper Energy
Services division from August 1998 to July 2001 and Senior Vice President, General Counsel and
Secretary from April 1995 to July 1999. |
|
|
|
John D. Carne (57)
|
|
Senior Vice President since February 16, 2006. Vice President from May 2003 to February 2006.
President, Cooper Cameron Valves since April 2002. Director of Operations, Eastern Hemisphere,
Cameron Division from 1999 to March 2002. Plant Manager, Leeds, England, Cameron Division from 1996
to 1999. Director of Operations, U.K. & Norway, Cooper Energy Services (U.K.) Ltd. from 1988 to
1996. |
|
|
|
Jack B. Moore (52)
|
|
Senior Vice President since July 2005. Vice President from May 2003 to July 2005. President, Cameron
Division since July 2002. Vice President and General Manager, Cameron Western Hemisphere from July
1999 to July 2002. Vice President Western Hemisphere Operations, Vice President Eastern Hemisphere,
Vice President Latin American Operations, Director Human Resources, Director Market Research and
Director Materials of Baker Hughes Incorporated from 1976 to July 1999. |
|
|
|
William C. Lemmer (61)
|
|
Vice President, General Counsel and Secretary since July 1999. Vice President, General Counsel and
Secretary of Oryx Energy Company from 1994 to March 1999. |
|
|
|
Robert J. Rajeski (60)
|
|
Vice President since July 2000. President, Cooper Compression since October 2002. President, Cooper
Turbocompressor division from July 1999 to October 2002 and President, Cooper Energy Services
division from July 2001 to October 2002. Vice President and General Manager of Ingersoll-Dresser
Pump Co., Engineered Pump division from 1994 to July 1999. |
|
|
|
Jane C. Schmitt (54)
|
|
Vice President, Human Resources since May 1999. Vice President, Compensation and Benefits from 1996
to 1999, and Director, Compensation and Benefits from 1995 to 1996. |
|
|
|
Charles M. Sledge (40)
|
|
Vice President and Corporate Controller since July 2001. Senior Vice President, Finance and
Treasurer from 1999 to June 2001, and Vice President, Controller from 1996 to 1999, of Stage Stores,
Inc., a chain of family apparel stores. Stage Stores, Inc. filed a voluntary petition under Chapter
11 of the United States Bankruptcy Code in June 2000 and successfully emerged from bankruptcy
protection in August 2001. |
|
|
|
Dalton L. Thomas (56)
|
|
Vice President, Operations Support, since February 2004. President, Cameron division from July 1998
to 2001. Vice President, Eastern Hemisphere for Cameron division from 1995 to July 1998. |
Glossary of Terms
Actuator. A hydraulic or electric motor used to open or close valves.
Blowout Preventer. A hydraulically operated system of safety valves installed at the wellhead
during drilling and completion operations for the purpose of preventing an increase of
high-pressure formation fluids oil, gas or water in the wellbore from turning into a
blowout of the well.
Choke. A type of valve used to control the rate and pressure of the flow of production from a
well or through flowlines.
11
Christmas tree. An assembly of valves, pipes and fittings used to control the flow of oil and gas
from a well.
Compressor. A device used to create a pressure differential in order to move or compress a vapor
or a gas.
Centrifugal compressor. A compressor with an impeller or rotor, a rotor shaft and a casing which
discharges gases under pressure by centrifugal force.
Integral reciprocating engine-compressor. A compressor in which the crankshaft is shared by the
engine and compressor, each having its own piston rods driven by the shared crankshaft.
Integrally geared centrifugal compressor. A compressor in which the motor is geared so that the
compressor runs at higher rpms than the motor itself to gain efficiency.
Reciprocating compressor. A compressor in which the compression effect is produced by the
reciprocating motion of pistons and plungers operating in cylinders.
Controls. A device which allows the remote triggering of an actuator to open or close a valve.
Elastomer. A rubberized pressure control sealing element used in drilling and wellhead
applications.
Riser. Pipe used to connect the wellbore of offshore wells to drilling or production equipment on
the surface, and through which drilling fluids or hydrocarbons travel.
Valve. A device used to control the rate of flow in a line, to open or shut off a line
completely, or to serve as an automatic or semi-automatic safety device.
Wellhead. The equipment installed at the surface of a wellbore to maintain control of a well and
including equipment such as the casing head, tubing head and Christmas tree.
ITEM 1A. RISK FACTORS
The information set forth under the caption Factors That May Affect Financial Condition and
Future Results on pages 35 to 37 in the 2005 Annual Report to Stockholders is incorporated herein
by reference.
ITEM 1B. UNRESOLVED STAFF COMMENTS
There were no unresolved comments from the SEC staff at the time of filing of this Form 10-K.
ITEM 2. PROPERTIES
The Company currently operates manufacturing plants ranging in size from approximately 11,000
square feet to approximately 1,350,000 square feet. The Company also owns and leases warehouses,
distribution centers, aftermarket and storage facilities and sales offices. The Company leases its
corporate headquarters office space and space for the Cameron and CCV division headquarters in
Houston, Texas.
The Company manufactures, markets and sells its products and provides services throughout the
world, operating facilities in numerous countries. At December 31, 2005, the significant facilities
used by Cooper Cameron throughout the world for manufacturing, distribution, aftermarket services,
machining, storage and warehousing contained an aggregate of approximately 9,808,535 square feet of
space, of which approximately 6,989,699 square feet (71%) was owned and 2,818,836 (29%) was leased.
Of this total, approximately 4,955,715 square feet of space (51%) is located in the United States
and Canada, 467,817 square feet of space (5%) is located in Mexico and South America, and 4,385,003
square feet of space (45%) is located in Europe, Africa and Asia. The table below shows the number
of significant operating manufacturing, warehouse and distribution and aftermarket facilities by
business segment and geographic area. Cameron and CCV share space in certain facilities and, thus,
are being reported together.
12
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Asia/Pacific |
|
|
|
|
|
|
Western |
|
Eastern |
|
and |
|
West |
|
|
|
|
Hemisphere |
|
Hemisphere |
|
Middle East |
|
Africa |
|
Total |
Cameron and CCV |
|
|
77 |
|
|
|
30 |
|
|
|
13 |
|
|
|
6 |
|
|
|
126 |
|
Cooper Compression |
|
|
19 |
|
|
|
2 |
|
|
|
1 |
|
|
|
0 |
|
|
|
22 |
|
Cooper Cameron believes its facilities are suitable for their present and intended
purposes and are adequate for the Companys current and anticipated level of operations.
ITEM 3. LEGAL PROCEEDINGS
The Company is subject to a number of contingencies which include environmental matters,
litigation and tax contingencies.
Environmental Matters
The Companys worldwide operations are subject to domestic and international regulations with
regard to air, soil and water quality as well as other environmental matters. The Company, through
its environmental management system and active third party audit program, believes it is in
substantial compliance with these regulations.
The Company has been identified as a potentially responsible party (PRP) with respect to
four sites designated for cleanup under the Comprehensive Environmental Response Compensation and
Liability Act (CERCLA) or similar state laws. The Companys involvement at two of the sites has
been resolved with de minimis payment. A third is believed to also be at a de minimis level. The
fourth site is Osborne, Pennsylvania (a landfill into which the Cooper Compression operation in
Grove City, Pennsylvania deposited waste), where remediation is complete and remaining costs relate
to ongoing ground water treatment and monitoring. The Company is also engaged in site cleanup under
the Voluntary Cleanup Plan of the Texas Commission on Environmental Quality at former manufacturing
locations in Houston and Missouri City, Texas. Additionally, the Company has discontinued
operations at a number of other sites which had previously been in existence for many years. The
Company does not believe, based upon information currently available, that there are any material
environmental liabilities existing at these locations. At December 31, 2005, the Companys
consolidated balance sheet included a liability of $8.8 million for environmental matters.
Legal Matters
As discussed in Environmental Matters above, the Company is engaged in site cleanup at a
former manufacturing site in Houston, Texas. In 2001, the Company discovered that contaminated
underground water at this site had migrated to an adjacent residential area. Pursuant to
applicable state regulations, the Company notified the affected homeowners. The Company has
entered into 21 written agreements with residents over the past four years that obligated the
Company to either reimburse sellers in the area for the estimated decline in value due to a
potential buyers concerns that related to the contamination or, in the case of some of these
agreements, to purchase the property after an agreed marketing period. Four of these agreements
have had no claim made under them as yet. To date, the Company has one property it has purchased
that remains unsold, with an appraised value of $1.8 million. In addition, the Company has settled
six other property claims by homeowners. The Company has had expenses and losses of approximately
$7.6 million since 2002 related to the various agreements with homeowners. The Company has filed
for reimbursement under an insurance policy purchased specifically for this exposure but has not
recognized any potential reimbursement in its consolidated financial statements. The Company
entered into these agreements for the purpose of mitigating the potential impact of the disclosure
of the environmental issue. It was the Companys intention to stabilize property values in the
affected area to avoid or mitigate future claims. The Company believes it has been successful in
these efforts as the number and magnitude of claims have declined over time and, while the Company
has continued to negotiate with homeowners on a case by case basis, the Company no longer offers
these agreements in advance of sale. There are approximately 150 homes in the affected area with
an estimated aggregate appraised value of $150.0 million. The
homeowners that have settled with
the Company have no further claims on these properties. An unknown number of these properties have sold with no
Company support, but with disclosure of the contamination and, therefore, likely have no further
claims. The Companys financial statements reflect a liability for its estimated exposure under
the outstanding agreements with homeowners. The Company has not reflected a liability in its
financial statements for any other potential damages, if any, related to this matter since the
Company is no longer entering into property protection agreements with homeowners in advance of
sale, the Company has not received any additional significant claims other than the lawsuits
discussed below and the Companys remediation efforts are resulting in a lower level of
contamination than when originally disclosed to the homeowners. Additionally, the Company
is unable to predict future market values of homes in the affected areas and how potential
buyers of such homes may view the underground contamination in making a purchase decision.
13
The Company is a named defendant in two lawsuits regarding this contamination. In Valice v.
Cooper Cameron Corporation (80th Jud. Dist. Ct., Harris County, filed June 21, 2002), the
plaintiffs claim that the contaminated underground water has reduced property values and threatens
the health of the area residents. The case is filed as a class action. The complaint filed seeks
an analysis of the contamination, reclamation and recovery of actual damages for the loss of
property value. The Company is of the opinion that there is no health risk to area residents and
that the lawsuit essentially reflects concerns over possible declines in property value. Counsel
for each of the Company, its insurer and the Valice plaintiffs are currently negotiating a possible
settlement alternative under which homeowners in the affected area would be indemnified for a loss
of property value, if any, due to the contamination upon any sale within a limited timeframe.
However, there are still significant unresolved issues related to a settlement of this matter
including the methodology of quantifying and allocating damages, attorneys fees for plaintiffs
attorneys, agreement on a settlement by all interested parties, a fairness opinion rendered by the
Court and the ability of the plaintiffs to obtain approval of the members of the putative class.
Absent a settlement with the plaintiffs, the Company does not believe a class would be certified
and thus the Company believes it has no liability to the putative class at this point in time.
Therefore, the Company has not recorded a liability for this possible settlement in its financial
statements.
In Kramer v. Cameron Iron Works, Inc., Cooper Industries, Inc., Cooper Cameron Corporation,
and Tzunming Hsu and Shan Shan Hsu (190th Judicial District, Harris County, filed May 29, 2003),
the plaintiff purchased one of the homes in the area and alleges a failure by the defendants to
disclose the presence of contamination and seeks to recover unspecified monetary damages.
The Company believes any potential exposure from existing agreements and any settlement of the
class action, or, based on its review of the facts and law, any potential exposure from these, or
similar, suits will not have a material adverse effect on its financial condition or liquidity.
The Company had been named as a defendant in a suit brought by a purchaser of an option to
purchase a parcel of the same former manufacturing site, Silber/I-10 Venture Ltd., f/k/a
Rocksprings Ltd. v. Falcon Interests Realty Corp., Cooper Industries Inc. and Cooper Cameron
Corporation (212th Judicial District Court, Galveston County, filed August 15, 2002) that alleged
fraud and breach of contract regarding the environmental condition of the parcel under option. The
parties have settled this matter and the case has been dismissed.
The Company has been named as a defendant in a number of multi-defendant, multi-plaintiff tort
lawsuits since 1995, 215 of which have been closed and 236 of which remained open as of December
31, 2005. Of the 215 cases closed, 57 have been by a settlement at a cost of approximately $22,207
per case. The Company made no settlement payments in the remaining 158 cases. At December 31,
2005, the Companys consolidated balance sheet included a liability of $3.5 million for the 236
cases which remain open, which includes legal costs.
The Company believes, based on its review of the facts and law, that the potential exposure
from the remaining suits will not have a material adverse effect on its financial condition or
liquidity.
Tax Contingencies
The Company has operations in over 35 countries. As a result, the Company is subject to
various tax filing requirements in these countries. The Company prepares its tax filings in a
manner which it believes is consistent with such filing requirements. However, some of the tax
laws and regulations which the Company is subject to are subject to interpretation and/or judgment.
Although the Company believes that the tax liability for periods ending on or before the balance
sheet date have been adequately provided for in the financial statements, to the extent that a
taxing authority believes that the Company has not prepared its tax filings in accordance with the
authoritys interpretation of the tax laws/regulations, the Company could be exposed to additional
taxes.
ITEM 4. SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS
There were no matters submitted to a vote of security holders during the fourth quarter of
2005.
14
PART II
ITEM 5. MARKET FOR REGISTRANTS COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF
EQUITY SECURITIES
The common stock of Cooper Cameron, par value $.01 per share (together with the associated
Rights to Purchase Series A Junior Participating Preferred Stock), is traded on the New York Stock
Exchange (NYSE) under the symbol CAM. No dividends were paid during 2005 or 2004.
The following table indicates the range of trading prices on the NYSE for January 3, 2005
through December 30, 2005 and for January 2, 2004 through December 31, 2004 (revised to reflect the
2-for-1 stock split effective December 15, 2005).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Price Range ($) |
|
|
High |
|
Low |
|
Last |
2005 |
|
|
|
|
|
|
|
|
|
|
|
|
First Quarter |
|
$ |
29.805 |
|
|
$ |
25.52 |
|
|
$ |
28.605 |
|
Second Quarter |
|
|
31.99 |
|
|
|
26.76 |
|
|
|
31.025 |
|
Third Quarter |
|
|
37.695 |
|
|
|
30.86 |
|
|
|
36.965 |
|
Fourth Quarter |
|
|
43.10 |
|
|
|
32.21 |
|
|
|
41.40 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Price Range ($) |
|
|
High |
|
Low |
|
Last |
2004 |
|
|
|
|
|
|
|
|
|
|
|
|
First Quarter |
|
$ |
24.745 |
|
|
$ |
20.025 |
|
|
$ |
22.025 |
|
Second Quarter |
|
|
25.405 |
|
|
|
21.465 |
|
|
|
24.35 |
|
Third Quarter |
|
|
27.65 |
|
|
|
23.48 |
|
|
|
27.42 |
|
Fourth Quarter |
|
|
28.37 |
|
|
|
23.62 |
|
|
|
26.905 |
|
As of February 16, 2006, the approximate number of stockholders of record of Cooper Cameron
common stock was 1,305.
Information concerning securities authorized for issuance under equity compensation plans is
included in Note 9 of the Notes to Consolidated Financial Statements, which notes are incorporated
herein by reference in Part II, Item 8 hereof.
ITEM 6. SELECTED FINANCIAL DATA
The information set forth under the caption Selected Consolidated Historical Financial Data
of Cooper Cameron Corporation on page 70 in the 2005 Annual Report to Stockholders is incorporated
by reference.
ITEM 7. MANAGEMENTS DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
The information set forth under the caption Managements Discussion and Analysis of Results
of Operations and Financial Condition of Cooper Cameron Corporation on pages 25-38 in the 2005
Annual Report to Stockholders is incorporated herein by reference.
ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK
The information for this item is set forth in the section entitled Market Risk Information
on pages 37-38 in the 2005 Annual Report to Stockholders and is incorporated herein by reference.
ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA
The following consolidated financial statements of the Company and the independent registered
public accounting firms reports set forth on pages 40-69 in the 2005 Annual Report to Stockholders
are incorporated herein by reference:
Report of Independent Registered Public Accounting Firm on Internal Control Over Financial
Reporting.
15
Report of Independent Registered Public Accounting Firm.
Consolidated Results of Operations for each of the three years in the period ended December
31, 2005.
Consolidated Balance Sheets as of December 31, 2005 and 2004.
Consolidated Cash Flows for each of the three years in the period ended December 31, 2005.
Consolidated Changes in Stockholders Equity for each of the three years in the period ended
December 31, 2005.
Notes to Consolidated Financial Statements.
ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE
None.
ITEM 9A. CONTROLS AND PROCEDURES
In accordance with Exchange Act Rules 13a-15 and 15d-15, the Company carried out an
evaluation, under the supervision and with the participation of the Companys Disclosure Committee
and the Companys management, including the Chief Executive Officer and the Chief Financial
Officer, of the effectiveness of the design and operation of the Companys disclosure controls and
procedures, as of the end of the period covered by this report. Based upon that evaluation, the
Chief Executive Officer and the Chief Financial Officer concluded that the Companys disclosure
controls and procedures were effective as of December 31, 2005 to ensure that information required
to be disclosed by the Company that it files or submits under the Exchange Act is recorded,
processed, summarized and reported within the time periods specified in the SECs rules and forms
and that information required to be disclosed in the reports that the Company files or submits
under the Exchange Act is accumulated and communicated to the Companys management, including its
Chief Executive Officer and Chief Financial Officer, as appropriate, to allow timely decisions
regarding required disclosure.
Other than the acquisition of substantially all of the businesses included within the Flow
Control segment of Dresser, Inc. and the inclusion of their results of operations since the
acquisition date and their year-end financial position in the Companys consolidated financial
statements as of and for the year ended December 31, 2005, there has been no change in the
Companys internal controls over financial reporting that occurred during the three months ended
December 31, 2005 that has materially affected, or is reasonably likely to materially affect, the
Companys internal controls over financial reporting.
The information set forth under the captions Managements Report on Internal Control Over
Financial Reporting and Assessment of Internal Control Over Financial Reporting on page 39 of
the 2005 Annual Report to Stockholders and the Report of Independent Registered Public Accounting
Firm on Internal Control Over Financial Reporting included on page 40 of the 2005 Annual Report to
Stockholders is incorporated herein by reference.
ITEM 9B. OTHER INFORMATION
None
PART III
ITEM 10. DIRECTORS AND EXECUTIVE OFFICERS OF THE REGISTRANT
Information regarding Section 16(a) compliance, the Audit Committee, the Companys Code of
Business Ethics and Ethics for Directors, shareholder nominating procedures and background of the
directors appearing under the captions Section 16(a) Beneficial Ownership Reporting Compliance,
Information Concerning the Board of Directors, and Security Ownership of Management in the
Companys Proxy Statement for the 2006 Annual Meeting of Stockholders is incorporated herein by
reference.
16
The Registrant has adopted a code of ethics that applies to all employees, including its
principal executive officer, principal financial officer, principal accounting officer and its
Board of Directors. A copy of the code of ethics is available on the Registrants Internet website
at www.coopercameron.com and is available in print to any shareholder free of charge upon request.
The Registrant intends to satisfy the disclosure requirements under Item 10 of Form 8-K regarding
an amendment to, or a waiver from, a provision of its code of ethics that applies to its principal
executive officer, principal financial officer, principal accounting officer or persons performing
similar functions, by posting such information on its website at the address set forth above.
The information under the heading Executive Officers of the Registrant in Part I, Item 1 of
this Form 10-K is incorporated by reference in this section.
ITEM 11. EXECUTIVE COMPENSATION
The information concerning Executive Compensation required by Item 11 shall be included in the
Proxy Statement to be filed relating to our 2006 Annual Meeting of Stockholders and is incorporated
herein by reference.
ITEM 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS
The information concerning Security Ownership of Certain Beneficial Owners and Management
required by Item 12 shall be included in our Proxy Statement to be filed relating to the 2006
Annual Meeting of Stockholders and is incorporated herein by reference.
ITEM 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS
The information concerning Certain Relationships and Related Transactions required by Item 13
shall be included in our Proxy Statement to be filed relating to the 2006 Annual Meeting of
Stockholders and is incorporated herein by reference.
ITEM 14. PRINCIPAL ACCOUNTANT FEES AND SERVICES
The information concerning Principal Accountant Fees and Services required by Item 14 shall be
included in the Proxy Statement to be filed relating to our 2006 Annual Meeting of Stockholders and
is incorporated herein by reference.
17
PART IV
ITEM 15. EXHIBITS AND FINANCIAL STATEMENT SCHEDULES
(a) The following documents are filed as part of this Report:
|
(1) |
|
Financial Statements: |
|
|
|
|
All financial statements of the Registrant as set forth under Part II, Item 8 of this Annual
Report on Form 10-K. |
|
|
(2) |
|
Financial Statement Schedules: |
REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
The Board of Directors and Stockholders
Cooper Cameron Corporation
We have audited the consolidated financial statements of Cooper Cameron Corporation (the Company)
as of December 31, 2005 and 2004, and for each of the three years in the period ended December 31,
2005, and have issued our report thereon dated February 24, 2006 (incorporated by reference in this
Form 10-K). Our audits also included the financial statement schedule included in Item 15(a)(2) of
this Form 10-K. This schedule is the responsibility of the Companys management. Our
responsibility is to express an opinion based on our audits.
In our opinion, the financial statement schedule referred to above, when considered in relation to
the basic consolidated financial statements taken as a whole, presents fairly, in all material
respects, the information set forth therein.
|
|
|
|
|
/s/ Ernst & Young LLP |
|
|
|
|
|
ERNST & YOUNG LLP |
Houston, Texas
February 24, 2006
Schedule II Valuation and Qualifying Accounts
(dollars in thousands)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Additions |
|
|
|
|
|
|
|
|
|
|
|
|
Balance at |
|
Charged to |
|
Charged to |
|
|
|
|
|
|
|
|
|
Balance at |
|
|
beginning of |
|
costs and |
|
other |
|
|
|
|
|
|
|
|
|
end |
|
|
period |
|
expenses |
|
accounts |
|
Deductions (b) |
|
Translation |
|
of period |
YEAR ENDED DECEMBER 31, 2005: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Allowance for doubtful accounts |
|
$ |
4,513 |
|
|
$ |
1,583 |
|
|
$ |
4,556 |
(a) |
|
$ |
(874 |
) |
|
$ |
(3 |
) |
|
$ |
9,775 |
|
Allowance for obsolete and excess inventory |
|
$ |
47,778 |
|
|
$ |
21,971 |
|
|
$ |
33,997 |
(a) |
|
$ |
(32,158 |
) |
|
$ |
(1,115 |
) |
|
$ |
70,473 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
YEAR ENDED DECEMBER 31, 2004: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Allowance for doubtful accounts |
|
$ |
1,823 |
|
|
$ |
3,313 |
|
|
$ |
145 |
|
|
$ |
(781 |
) |
|
$ |
13 |
|
|
$ |
4,513 |
|
Allowance for obsolete and excess inventory |
|
$ |
37,317 |
|
|
$ |
18,659 |
|
|
$ |
2,500 |
|
|
$ |
(10,019 |
) |
|
$ |
(679 |
) |
|
$ |
47,778 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
YEAR ENDED DECEMBER 31, 2003: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Allowance for doubtful accounts |
|
$ |
2,170 |
|
|
$ |
15 |
|
|
$ |
|
|
|
$ |
(388 |
) |
|
$ |
26 |
|
|
$ |
1,823 |
|
Allowance for obsolete and excess inventory |
|
$ |
35,355 |
|
|
$ |
8,506 |
|
|
$ |
|
|
|
$ |
(6,784 |
) |
|
$ |
240 |
|
|
$ |
37,317 |
|
|
|
|
(a) |
|
Primarily represents acquisition date balances of newly acquired entities or purchase
price allocation adjustments from entities acquired in the prior year. |
|
(b) |
|
Write-offs of uncollectible receivables or obsolete inventory. |
18
|
|
|
|
3.1
|
|
Amended and Restated Certificate of Incorporation of Cooper Cameron Corporation, dated June
30, 1995, filed as Exhibit 4.2 to the Registration Statement on Form S-8 of Cooper Cameron
Corporation (Commission File No. 33-94948), and incorporated herein by reference. |
|
|
|
3.2
|
|
Certificate of Amendment to the Restated Certificate of Incorporation of Cooper Cameron
Corporation, filed as Exhibit 4.3 to the Registration Statement on Form S-8 of Cooper Cameron
Corporation (Commission File No. 333-57995), and incorporated herein by reference. |
|
|
|
3.3
|
|
Second Amended and Restated Bylaws of Cooper Cameron Corporation, filed as Exhibit 3.3 to the
Annual Report on Form 10-K for 2002 of Cooper Cameron Corporation, and incorporated herein by
reference. |
|
|
|
4.1
|
|
Form of Rights Agreement, dated as of May 1, 1995, between Cooper Cameron Corporation and
First Chicago Trust Company of New York, as Rights Agent, filed as Exhibit 4.1 to the
Registration Statement on Form S-8 of Cooper Cameron Corporation (Commission File No.
33-94948), and incorporated herein by reference. |
|
|
|
4.2
|
|
First Amendment to Rights Agreement between Cooper Cameron Corporation and First Chicago
Trust Company of New York, as Rights Agent, dated November 1, 1997, filed as Exhibit 4.2 to
the Annual Report on Form 10-K for 1997 of Cooper Cameron Corporation, and incorporated herein
by reference. |
|
|
|
4.3
|
|
Registration Statement on Form S-3 filed with the Securities and Exchange Commission on May
4, 1998 (Registration Statement No. 333-51705), and incorporated herein by reference. |
|
|
|
10.1
|
|
Cooper Cameron Corporation Broad Based 2000 Incentive Plan, filed as Exhibit 4.6 to the
Registration Statement on Form S-8 of Cooper Cameron Corporation (Commission File No.
333-46638), and incorporated herein by reference. |
|
|
|
10.2
|
|
First Amendment to the Cooper Cameron Corporation Broad Based 2000 Incentive Plan, filed as
Exhibit 4.7 to the Registration Statement on Form S-8 filed with the SEC on May 29, 2001 (File
No. 333-61820), and incorporated herein by reference. |
|
|
|
10.3
|
|
Second Amendment to the Cooper Cameron Corporation Broad Based 2000 Incentive Plan, filed as
Exhibit 4.8 to the Registration Statement on Form S-8 filed with the SEC on February 4, 2002
(File No. 333-82082), and incorporated herein by reference. |
|
|
|
10.4
|
|
Third Amendment to the Cooper Cameron Corporation Broad Based 2000 Incentive Plan, filed as
Exhibit 4.9 to the Registration Statement on Form S-8 filed with the SEC on February 4, 2002
(File No. 333-82082), and incorporated herein by reference. |
|
|
|
10.5
|
|
Fourth Amendment to the Cooper Cameron Corporation Broad Based 2000 Incentive Plan, filed as
Exhibit 10.6 to the Annual Report on Form 10-K for 2002 of Cooper Cameron Corporation, and
incorporated herein by reference. |
|
|
|
10.6
|
|
Cooper Cameron Corporation Retirement Savings Plan, as Amended and Restated, effective May 1,
2003, filed as Exhibit 10.8 to the Annual Report on Form 10-K for 2004 of Cooper Cameron
Corporation, and incorporated herein by reference. |
|
|
|
10.7
|
|
First through Third Amendments to the Cooper Cameron Corporation Retirement Savings Plan,
filed as Exhibit 10.9 to the Annual Report on Form 10-K for 2004 of Cooper Cameron
Corporation, and incorporated herein by reference. |
|
|
|
10.8*
|
|
Fourth and Fifth Amendments to the Cooper Cameron Corporation Retirement Savings Plan. |
|
|
|
10.9
|
|
Merger of the Petreco International, Inc. 401(k) Profit Sharing Plan with and into the Cooper
Cameron Corporation Retirement Savings Plan, filed as Exhibit 10.10 to the Annual Report on
Form 10-K for 2004 of Cooper Cameron Corporation, and incorporated herein by reference. |
19
|
|
|
|
10.10
|
|
Merger of the Cooper Cameron Corporation Savings-Investment Plan for Hourly Employees with
and into the Cooper Cameron Corporation Retirement Savings Plan, filed as Exhibit 10.11 to the
Annual Report on Form 10-K for 2004 of Cooper Cameron Corporation, and incorporated herein by
reference. |
|
|
|
10.11*
|
|
Amendment to the NuFlo Technologies, Inc. 401(K) Plan and Merger of the NuFlo Technologies,
Inc. 401(K) Plan with and into the Cooper Cameron Corporation Retirement Savings Plan. |
|
|
|
10.12
|
|
Cooper Cameron Corporation 2005 Equity Incentive Plan, incorporated by reference to the
Cooper Cameron Corporation Proxy Statement for the Annual Meeting of Stockholders held on May
5, 2005. |
|
|
|
10.13*
|
|
First Amendment to the Cooper Cameron Corporation 2005 Equity Incentive Plan, |
|
|
|
10.14
|
|
Cooper Cameron Corporation Supplemental Excess Defined Benefit Plan, filed as Exhibit 10.4
to the Registration Statement on Form S-4 of Cooper Cameron Corporation (Commission File No.
33-90288), and incorporated herein by reference. |
|
|
|
10.15
|
|
First Amendment to Cooper Cameron Corporation Supplemental Excess Defined Benefit Plan,
effective as of January 1, 1996, filed as Exhibit 10.7 to the Annual Report on Form 10-K for
1996 of Cooper Cameron Corporation, and incorporated herein by reference. |
|
|
|
10.16
|
|
Cooper Cameron Corporation 2003 Supplemental Excess Defined Contribution Plan, filed as
Exhibit 4.13 to the Registration Statement on Form S-8 filed with the SEC on June 18, 2003, of
Cooper Cameron Corporation (Commission File No. 333-106225), and incorporated herein by
reference. |
|
|
|
10.17
|
|
First Amendment to Cooper Cameron Corporation 2003 Supplemental Excess Defined Contribution
Plan filed as Exhibit 4.14 to the Registration Statement on Form S-8, filed with the SEC on
June 18, 2003, of Cooper Cameron Corporation (Commission File No. 333-106225), and
incorporated herein by reference. |
|
|
|
10.18
|
|
Employment Agreement by and between Sheldon R. Erikson and Cooper Cameron Corporation,
effective as of August 13, 1999, filed as Exhibit 10.16 to the Annual Report on Form 10-K for
1999 of Cooper Cameron Corporation, and incorporated herein by reference. |
|
|
|
10.19
|
|
Amendment to the Employment Agreement between Cooper Cameron Corporation and Sheldon R.
Erikson, dated August 24, 2004, filed as Exhibit 10.48 to the Annual Report on Form 10-K for
2004 of Cooper Cameron Corporation, and incorporated herein by reference. |
|
|
|
10.20
|
|
Employment Agreement by and between Franklin Myers and Cooper Cameron Corporation, effective
as of September 1, 1999, filed as Exhibit 10.18 to the Annual Report on Form 10-K for 1999 of
Cooper Cameron Corporation, and incorporated herein by reference. |
|
|
|
10.21
|
|
Amendment to the Employment Agreement between Cooper Cameron Corporation and Franklin Myers,
dated August 16, 2004, filed as Exhibit 10.47 to the Annual Report on Form 10-K for 2004 of
Cooper Cameron Corporation, and incorporated herein by reference. |
|
|
|
10.22
|
|
Form of Change in Control Agreement, effective November 11, 1999, by and between Cooper
Cameron Corporation and Scott Amann, Jane Crowder Schmitt, William Lemmer and Robert Rajeski,
filed as Exhibit 10.19 to the Annual Report on Form 10-K for 1999 of Cooper Cameron
Corporation, and incorporated herein by reference. |
|
|
|
10.23*
|
|
Amendment to the Change in Control
Agreements, effective May 31, 2005, by and between
Cooper Cameron Corporation and Scott Amann, Jane Crowder Schmitt, William Lemmer and Robert
Rajeski. |
|
|
|
10.24
|
|
Form of Change in Control Agreement, effective October 10, 2002, by and between Cooper
Cameron Corporation and Charles M. Sledge, filed as Exhibit 10.23 to the Annual Report on Form
10-K for 2002 of Cooper Cameron Corporation, and incorporated herein by reference. |
20
|
|
|
|
10.25
|
|
Amendment to the Employment Agreement between Cooper Cameron Corporation and Charles M.
Sledge, dated December 21, 2004, filed as Exhibit 10.46 to the Annual Report on Form 10-K for
2004 of Cooper Cameron Corporation, and incorporated herein by reference. |
|
|
|
10.26
|
|
Form of Change in Control Agreement, effective May 8, 2003, by and between Cooper Cameron
Corporation and John Carne and Jack Moore, filed as Exhibit 10.27 to the Annual Report on Form
10-K for 2003 of Cooper Cameron Corporation, and incorporated herein by reference. |
|
|
|
10.27
|
|
Amended and Restated Management Incentive Compensation Plan of Cooper Cameron Corporation,
incorporated herein by reference to the Cooper Cameron Corporation 2005 Proxy Statement for
the Annual Meeting of Stockholders held on May 5, 2005. |
|
|
|
10.28
|
|
Change in Control Policy of Cooper Cameron Corporation, approved February 19, 1996, filed as
Exhibit 10.18 to the Annual Report on Form 10-K for 1996 of Cooper Cameron Corporation, and
incorporated herein by reference. |
|
|
|
10.29*
|
|
Form of Executive Severance Program
of Cooper Cameron Corporation, effective July 1, 2000,
and reissued January 1, 2004. |
|
|
|
10.30
|
|
Credit Agreement, dated as of
October 12, 2005, among Cooper Cameron Corporation and
certain of its subsidiaries and the banks named therein and JPMorgan
Chase Bank, N.A., as agent, filed as
Exhibit 10.1 to the Current Report on Form 8-K dated
October 12, 2005, of Cooper Cameron Corporation, and
incorporated herein by reference. |
|
|
|
10.31
|
|
Individual Account Retirement Plan for Bargaining Unit Employees at the Cooper Cameron
Corporation Buffalo, New York Plant, filed as Exhibit 4.6 to the Registration Statement on
Form S-8 (Registration No. 333-57991), incorporated herein by reference. |
|
|
|
10.32
|
|
First through Eighth Amendments to the Individual Account Retirement Plan for Bargaining
Unit Employees at the Cooper Cameron Corporation Buffalo, New York Plant, filed as Exhibit
10.36 to the Annual Report on Form 10-K for 2004 of Cooper Cameron Corporation, and
incorporated herein by reference. |
|
|
|
10.33*
|
|
Ninth Amendment to the Individual Account Retirement Plan for Bargaining Unit Employees at
the Cooper Cameron Corporation Buffalo, New York Plant. |
|
|
|
10.34
|
|
Form of Indemnification Agreement, effective February 20, 2003, by and between Cooper
Cameron Corporation and Nathan M. Avery, C. Baker Cunningham, Sheldon R. Erikson, Lamar
Norsworthy, Michael E. Patrick, David Ross and Bruce W. Wilkinson, filed as Exhibit 10.32 to
the Annual Report on Form 10-K/A for 2002 of Cooper Cameron Corporation, and incorporated
herein by reference. |
|
|
|
10.35
|
|
Form of Indemnification Agreement, effective February 20, 2003, by and between Cooper
Cameron Corporation and Mr. Jeff Altamari, Mr. Steve P. Beatty, Mr. John Carne, Ms. Jane
Crowder Schmitt, Mr. Hal Goldie, , Mr. William C. Lemmer, Mr. Jack B. Moore, Mr. Franklin
Myers, Mr. Robert Rajeski, Mr. Charles M. Sledge, and Mr. Rick Steans, filed as Exhibit 10.36
to the Annual Report on Form 10-K for 2003 of Cooper Cameron Corporation, and incorporated
herein by reference. |
|
|
|
10.36
|
|
Form of Stock Option Agreement for grants dated November 22, 2004, under the Cooper Cameron
Corporation Long-Term Incentive Plan, filed as an exhibit to a Form 8-K filed on January 18,
2005, and incorporated herein by reference. |
|
|
|
10.37
|
|
Change of Control Agreement, dated February 19, 2004, by and between Dalton Thomas and
Cooper Cameron Corporation, filed as Exhibit 10.49 to the Annual Report on Form 10-K for 2004
of Cooper Cameron Corporation, and incorporated herein by reference. |
|
|
|
10.38
|
|
Form of Restricted Stock Agreement for Restricted Stock Units granted on January 1, 2005,
filed as Exhibit 10.50 to the Annual Report on Form 10-K for 2004 of Cooper Cameron
Corporation, and incorporated herein by reference. |
|
|
|
10.39*
|
|
Form of Restricted Stock Agreement for Restricted Stock Units granted on January 1, 2006. |
|
|
|
10.40
|
|
Form of Stock Option Agreement for grants dated November 22, 2004, under the Cooper Cameron
Corporation Long-Term Incentive Plan, filed as an exhibit to a Form 8-K filed on January 18,
2005, and incorporated herein by reference. |
|
|
|
|
|
|
|
21
|
|
|
|
10.41*
|
|
Cooper Cameron Corporation Deferred Compensation Plan for Non-Employee Directors. |
|
|
|
10.42
|
|
Cooper Cameron Corporation
Long-Term Incentive Plan, as Amended and Restated as of November
2002, incorporated by reference to the Cooper Cameron Corporation
Proxy Statement for the Annual Meeting of Stockholders held on May 8,
2003. |
|
|
|
|
|
|
|
10.43
|
|
Sixth Amendment to the Cooper
Cameron Corporation Long-Term Incentive Plan, as Amended and Restated
as of November 2002, incorporated by reference to the Cooper Cameron
Corporation Proxy Statement for the annual meeting of Stockholders
held on May 8, 2003. |
|
|
|
|
|
|
|
10.44
|
|
Seventh Amendment to the Cooper
Cameron Corporation Long-Term Incentive Plan, filed as Exhibit 10.44 to the Annual Report on Form 10-K
for 2004 of Cooper Cameron Corporation, and incorporated herein by
reference. |
|
|
|
|
|
|
|
10.45
|
|
Cooper Cameron Corporation Second
Amended and Restated 1995 Stock Option Plan for Non-Employee
Directors (Registration Statement on Form S-8 No. 333-79787),
incorporated herein by reference. |
|
|
|
|
|
|
|
10.46
|
|
First Amendment to the Cooper
Cameron Corporation Second Amended and Restated 1995 Stock Option
Plan for Non-Employee Directors, filed as
Exhibit 10.43 to the Annual Report on Form 10-K
for 2004 of Cooper Cameron Corporation, and incorporated herein by
reference. |
|
|
|
|
|
|
10.47*
|
|
Form of Stock Option Agreement for stock options granted on November 10, 2005. |
|
|
|
|
|
13.1*
|
|
Portions of the 2005 Annual Report to Stockholders are included as an exhibit to this report. |
|
|
|
14.1
|
|
Code of Business Conduct and Ethics for Directors incorporated by reference to the Cooper
Cameron Corporation Proxy Statement for the annual meeting of Stockholders held on May 8,
2003. |
|
|
|
14.2
|
|
Code of Ethics for Management Personnel, filed as Exhibit 14.2 to the Annual Report on Form
10-K for 2004 of Cooper Cameron Corporation, and incorporated herein by reference. |
|
|
|
14.3
|
|
Standards of Conduct, filed as Exhibit 14.3 to the Annual Report on Form 10-K for 2004 of
Cooper Cameron Corporation, and incorporated herein by reference. |
|
|
|
21.1*
|
|
Subsidiaries of registrant. |
|
|
|
23.1*
|
|
Consent of Independent Registered Public Accounting Firm. |
|
|
|
31.1*
|
|
Certifications. |
|
|
|
31.2*
|
|
Certifications. |
|
|
|
32.1*
|
|
Certifications of Chief Executive Officer and Chief Financial Officer Pursuant to Section
906 of the Sarbanes-Oxley Act of 2002. |
22
SIGNATURES
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934,
the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto
duly authorized.
|
|
|
|
|
|
|
|
|
COOPER CAMERON CORPORATION |
|
|
|
|
Registrant |
|
|
|
|
|
|
|
|
|
|
|
By:
|
|
/s/ Charles M. Sledge |
|
|
|
|
|
|
|
|
|
|
|
|
|
(Charles M. Sledge) |
|
|
|
|
|
|
Vice President and Corporate Controller |
|
|
|
|
|
|
(Principal Accounting Officer) |
|
|
|
|
|
|
|
|
|
|
|
Date: March 6, 2006 |
|
|
Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been
signed on this 6th day of March, 2006, by the following persons on behalf of the Registrant and
in the capacities indicated.
|
|
|
Signature |
|
Title |
|
|
|
/s/ Nathan M. Avery |
|
|
|
|
Director |
|
|
|
/s/ C. Baker Cunningham |
|
|
|
|
Director |
|
|
|
/s/ Sheldon R. Erikson
|
|
Chairman, President and Chief Executive Officer |
|
|
(principal executive officer) |
|
|
|
/s/ Peter J. Fluor
|
|
|
|
|
Director |
|
|
|
/s/ Lamar Norsworthy
(Lamar Norsworthy)
|
|
Director |
|
|
|
/s/ Michael E. Patrick
(Michael E. Patrick)
|
|
Director |
|
|
|
/s/ David Ross III
(David Ross III)
|
|
Director |
|
|
|
/s/ Bruce W. Wilkinson
(Bruce W. Wilkinson)
|
|
Director |
|
|
|
/s/ Franklin Myers
|
|
Senior Vice President, Finance and Chief Financial Officer |
|
|
(principal financial officer) |
23
EXHIBIT INDEX
|
|
|
|
|
Exhibit |
|
|
|
Sequential |
Number |
|
Description |
|
Page Number |
3.1
|
|
Amended and Restated Certificate of Incorporation of Cooper Cameron Corporation, dated June
30, 1995, filed as Exhibit 4.2 to the Registration Statement on Form S-8 of Cooper Cameron
Corporation (Commission File No. 33-94948), and incorporated herein by reference. |
|
|
|
|
|
|
|
3.2
|
|
Certificate of Amendment to the Restated Certificate of Incorporation of Cooper Cameron
Corporation, filed as Exhibit 4.3 to the Registration Statement on Form S-8 of Cooper
Cameron Corporation (Commission File No. 333-57995), and incorporated herein by reference. |
|
|
|
|
|
|
|
3.3
|
|
Second Amended and Restated Bylaws of Cooper Cameron Corporation, filed as Exhibit 3.3 to
the Annual Report on Form 10-K for 2002 of Cooper Cameron Corporation, and incorporated
herein by reference. |
|
|
|
|
|
|
|
4.1
|
|
Form of Rights Agreement, dated as of May 1, 1995, between Cooper Cameron Corporation and
First Chicago Trust Company of New York, as Rights Agent, filed as Exhibit 4.1 to the
Registration Statement on Form S-8 of Cooper Cameron Corporation (Commission File No.
33-94948), and incorporated herein by reference. |
|
|
|
|
|
|
|
4.2
|
|
First Amendment to Rights Agreement between Cooper Cameron Corporation and First Chicago
Trust Company of New York, as Rights Agent, dated November 1, 1997, filed as Exhibit 4.2 to
the Annual Report on Form 10-K for 1997 of Cooper Cameron Corporation, and incorporated
herein by reference. |
|
|
|
|
|
|
|
4.3
|
|
Registration Statement on Form S-3 filed with the Securities and Exchange Commission on May
4, 1998 (Registration Statement No. 333-51705), and incorporated herein by reference. |
|
|
|
|
|
|
|
10.1
|
|
Cooper Cameron Corporation Broad Based 2000 Incentive Plan, filed as Exhibit 4.6 to the
Registration Statement on Form S-8 of Cooper Cameron Corporation (Commission File No.
333-46638), and incorporated herein by reference. |
|
|
|
|
|
|
|
10.2
|
|
First Amendment to the Cooper Cameron Corporation Broad Based 2000 Incentive Plan, filed as
Exhibit 4.7 to the Registration Statement on Form S-8 filed with the SEC on May 29, 2001
(File No. 333-61820), and incorporated herein by reference. |
|
|
|
|
|
|
|
10.3
|
|
Second Amendment to the Cooper Cameron Corporation Broad Based 2000 Incentive Plan, filed as
Exhibit 4.8 to the Registration Statement on Form S-8 filed with the SEC on February 4, 2002
(File No. 333-82082), and incorporated herein by reference. |
|
|
|
|
|
|
|
10.4
|
|
Third Amendment to the Cooper Cameron Corporation Broad Based 2000 Incentive Plan, filed as
Exhibit 4.9 to the Registration Statement on Form S-8 filed with the SEC on February 4, 2002
(File No. 333-82082), and incorporated herein by reference. |
|
|
|
|
|
|
|
10.5
|
|
Fourth Amendment to the Cooper Cameron Corporation Broad Based 2000 Incentive Plan, filed as
Exhibit 10.6 to the Annual Report on Form 10-K for 2002 of Cooper Cameron Corporation, and
incorporated herein by reference. |
|
|
|
|
|
|
|
10.6
|
|
Cooper Cameron Corporation Retirement Savings Plan, as Amended and Restated, effective May
1, 2003, filed as Exhibit 10.8 to the Annual Report on Form 10-K for 2004 of Cooper Cameron
Corporation, and incorporated herein by reference. |
|
|
|
|
|
|
|
10.7
|
|
First through Third Amendments to the Cooper Cameron Corporation Retirement Savings Plan,
filed as Exhibit 10.9 to the Annual Report on Form 10-K for 2004 of Cooper Cameron
Corporation, and incorporated herein by reference. |
|
|
|
|
|
|
|
10.8*
|
|
Fourth and Fifth Amendments to the Cooper Cameron Corporation Retirement Savings Plan. |
|
|
|
|
|
|
|
10.9
|
|
Merger of the Petreco International, Inc. 401(k) Profit Sharing Plan with and into the
Cooper Cameron Corporation Retirement Savings Plan, filed as Exhibit 10.10 to the Annual
Report on Form 10-K for 2004 of Cooper Cameron Corporation, and incorporated herein by
reference. |
|
|
|
|
|
|
|
10.10
|
|
Merger of the Cooper Cameron Corporation Savings-Investment Plan for Hourly Employees with
and into the Cooper Cameron Corporation Retirement Savings Plan, filed as Exhibit 10.11 to
the Annual Report on Form 10-K for 2004 of Cooper Cameron Corporation, and incorporated
herein by reference. |
|
|
24
|
|
|
|
|
Exhibit |
|
|
|
Sequential |
Number |
|
Description |
|
Page Number |
10.11*
|
|
Amendment to the NuFlo Technologies, Inc. 401(K) Plan and Merger of the NuFlo Technologies,
Inc. 401(K) Plan with and into the Cooper Cameron Corporation Retirement Savings Plan. |
|
|
|
|
|
|
|
10.12
|
|
Cooper Cameron Corporation 2005 Equity Incentive Plan, incorporated by reference to the
Cooper Cameron Corporation Proxy Statement for the Annual Meeting of Stockholders held on
May 5, 2005. |
|
|
|
|
|
|
|
10.13*
|
|
First Amendment to the Cooper Cameron Corporation 2005 Equity Incentive Plan, |
|
|
|
|
|
|
|
10.14
|
|
Cooper Cameron Corporation Supplemental Excess Defined Benefit Plan, filed as Exhibit 10.4
to the Registration Statement on Form S-4 of Cooper Cameron Corporation (Commission File No.
33-90288), and incorporated herein by reference. |
|
|
|
|
|
|
|
10.15
|
|
First Amendment to Cooper Cameron Corporation Supplemental Excess Defined Benefit Plan,
effective as of January 1, 1996, filed as Exhibit 10.7 to the Annual Report on Form 10-K for
1996 of Cooper Cameron Corporation, and incorporated herein by reference. |
|
|
|
|
|
|
|
10.16
|
|
Cooper Cameron Corporation 2003 Supplemental Excess Defined Contribution Plan, filed as
Exhibit 4.13 to the Registration Statement on Form S-8 filed with the SEC on June 18, 2003,
of Cooper Cameron Corporation (Commission File No. 333-106225), and incorporated herein by
reference. |
|
|
|
|
|
|
|
10.17
|
|
First Amendment to Cooper Cameron Corporation 2003 Supplemental Excess Defined Contribution
Plan filed as Exhibit 4.14 to the Registration Statement on Form S-8, filed with the SEC on
June 18, 2003, of Cooper Cameron Corporation (Commission File No. 333-106225), and
incorporated herein by reference. |
|
|
|
|
|
|
|
10.18
|
|
Employment Agreement by and between Sheldon R. Erikson and Cooper Cameron Corporation,
effective as of August 13, 1999, filed as Exhibit 10.16 to the Annual Report on Form 10-K
for 1999 of Cooper Cameron Corporation, and incorporated herein by reference. |
|
|
|
|
|
|
|
10.19
|
|
Amendment to the Employment Agreement between Cooper Cameron Corporation and Sheldon R.
Erikson, dated August 24, 2004, filed as Exhibit 10.48 to the Annual Report on Form 10-K for
2004 of Cooper Cameron Corporation, and incorporated herein by reference. |
|
|
|
|
|
|
|
10.20
|
|
Employment Agreement by and between Franklin Myers and Cooper Cameron Corporation, effective
as of September 1, 1999, filed as Exhibit 10.18 to the Annual Report on Form 10-K for 1999
of Cooper Cameron Corporation, and incorporated herein by reference. |
|
|
|
|
|
|
|
10.21
|
|
Amendment to the Employment Agreement between Cooper Cameron Corporation and Franklin Myers,
dated August 16, 2004, filed as Exhibit 10.47 to the Annual Report on Form 10-K for 2004 of
Cooper Cameron Corporation, and incorporated herein by reference. |
|
|
|
|
|
|
|
10.22
|
|
Form of Change in Control Agreement, effective November 11, 1999, by and between Cooper
Cameron Corporation and Scott Amann, Jane Crowder Schmitt, William Lemmer and Robert
Rajeski, filed as Exhibit 10.19 to the Annual Report on Form 10-K for 1999 of Cooper Cameron
Corporation, and incorporated herein by reference. |
|
|
|
|
|
|
|
10.23*
|
|
Amendment to the Change in Control
Agreements, effective May 31, 2005, by and between
Cooper Cameron Corporation and Scott Amann, Jane Crowder Schmitt, William Lemmer and Robert
Rajeski. |
|
|
|
|
|
|
|
10.24
|
|
Form of Change in Control Agreement, effective October 10, 2002, by and between Cooper
Cameron Corporation and Charles M. Sledge, filed as Exhibit 10.23 to the Annual Report on
Form 10-K for 2002 of Cooper Cameron Corporation, and incorporated herein by reference. |
|
|
|
|
|
|
|
10.25
|
|
Amendment to the Employment Agreement between Cooper Cameron Corporation and Charles M.
Sledge, dated December 21, 2004, filed as Exhibit 10.46 to the Annual Report on Form 10-K
for 2004 of Cooper Cameron Corporation, and incorporated herein by reference. |
|
|
|
|
|
|
|
10.26
|
|
Form of Change in Control Agreement, effective May 8, 2003, by and between Cooper Cameron
Corporation and John Carne and Jack Moore, filed as Exhibit 10.27 to the Annual Report on
Form 10-K for 2003 of Cooper Cameron Corporation, and incorporated herein by reference. |
|
|
|
|
|
|
|
10.27
|
|
Amended and Restated Management Incentive Compensation Plan of Cooper Cameron Corporation,
incorporated herein by reference to the Cooper Cameron Corporation 2005 Proxy Statement for
the Annual Meeting of Stockholders held on May 5, 2005. |
|
|
|
|
|
|
|
10.28
|
|
Change in Control Policy of Cooper Cameron Corporation, approved February 19, 1996, filed as
Exhibit 10.18 to the Annual Report on Form 10-K for 1996 of Cooper Cameron Corporation, and
incorporated herein by reference. |
|
|
25
|
|
|
|
|
Exhibit |
|
|
|
Sequential |
Number |
|
Description |
|
Page Number |
10.29*
|
|
Form of Executive Severance Program of Cooper Cameron Corporation,
effective July 1, 2000,
and reissued January 1, 2004. |
|
|
|
|
|
10.30
|
|
Credit Agreement, dated as of
October 12, 2005, among Cooper Cameron Corporation and
certain of its subsidiaries and the banks named therein and JPMorgan
Chase Bank, N.A., as agent, filed as
Exhibit 10.1 to the Current Report on Form 8-K dated
October 12, 2005, of Cooper Cameron Corporation, and
incorporated herein by reference. |
|
|
|
|
|
10.31
|
|
Individual Account Retirement Plan for Bargaining Unit Employees at the Cooper Cameron
Corporation Buffalo, New York Plant, filed as Exhibit 4.6 to the Registration Statement on
Form S-8 (Registration No. 333-57991), incorporated herein by reference. |
|
|
|
|
|
|
|
10.32
|
|
First through Eighth Amendments to the Individual Account Retirement Plan for Bargaining
Unit Employees at the Cooper Cameron Corporation Buffalo, New York Plant, filed as Exhibit
10.36 to the Annual Report on Form 10-K for 2004 of Cooper Cameron Corporation, and
incorporated herein by reference. |
|
|
|
|
|
|
|
10.33*
|
|
Ninth Amendment to the Individual Account Retirement Plan for Bargaining Unit Employees at
the Cooper Cameron Corporation Buffalo, New York Plant. |
|
|
|
|
|
|
|
10.34
|
|
Form of Indemnification Agreement, effective February 20, 2003, by and between Cooper
Cameron Corporation and Nathan M. Avery, C. Baker Cunningham, Sheldon R. Erikson, Lamar
Norsworthy, Michael E. Patrick, David Ross and Bruce W. Wilkinson, filed as Exhibit 10.32 to
the Annual Report on Form 10-K/A for 2002 of Cooper Cameron Corporation, and incorporated
herein by reference. |
|
|
|
|
|
|
|
10.35
|
|
Form of Indemnification Agreement, effective February 20, 2003, by and between Cooper
Cameron Corporation and Mr. Jeff Altamari, Mr. Steve P. Beatty, Mr. John Carne, Ms. Jane
Crowder Schmitt, Mr. Hal Goldie, , Mr. William C. Lemmer, Mr. Jack B. Moore, Mr. Franklin
Myers, Mr. Robert Rajeski, Mr. Charles M. Sledge, and Mr. Rick Steans, filed as Exhibit
10.36 to the Annual Report on Form 10-K for 2003 of Cooper Cameron Corporation, and
incorporated herein by reference. |
|
|
|
|
|
|
|
10.36
|
|
Form of Stock Option Agreement for grants dated November 22, 2004, under the Cooper Cameron
Corporation Long-Term Incentive Plan, filed as an exhibit to a Form 8-K filed on January 18,
2005, and incorporated herein by reference. |
|
|
|
|
|
|
|
10.37
|
|
Change of Control Agreement, dated February 19, 2004, by and between Dalton Thomas and
Cooper Cameron Corporation, filed as Exhibit 10.49 to the Annual Report on Form 10-K for
2004 of Cooper Cameron Corporation, and incorporated herein by reference. |
|
|
|
|
|
|
|
10.38
|
|
Form of Restricted Stock Agreement for Restricted Stock Units granted on January 1, 2005,
filed as Exhibit 10.50 to the Annual Report on Form 10-K for 2004 of Cooper Cameron
Corporation, and incorporated herein by reference. |
|
|
|
|
|
|
|
10.39*
|
|
Form of Restricted Stock Agreement for Restricted Stock Units granted on January 1, 2006. |
|
|
|
|
|
|
|
10.40
|
|
Form of Stock Option Agreement for grants dated November 22, 2004, under the Cooper Cameron
Corporation Long-Term Incentive Plan, filed as an exhibit to a Form 8-K filed on January 18,
2005, and incorporated herein by reference. |
|
|
|
|
|
|
|
10.41*
|
|
Cooper Cameron Corporation Deferred Compensation Plan for Non-Employee Directors. |
|
|
|
|
|
10.42
|
|
Cooper Cameron Corporation
Long-Term Incentive Plan, as Amended and Restated as of November
2002, incorporated by reference to the Cooper Cameron Corporation
Proxy Statement for the Annual Meeting of Stockholders held on May 8,
2003. |
|
|
|
|
|
|
|
10.43
|
|
Sixth Amendment to the Cooper
Cameron Corporation Long-Term Incentive Plan, as Amended and Restated
as of November 2002, incorporated by reference to the Cooper Cameron
Corporation Proxy Statement for the annual meeting of Stockholders
held on May 8, 2003. |
|
|
|
|
|
|
|
10.44
|
|
Seventh Amendment to the Cooper
Cameron Corporation Long-Term Incentive Plan, filed as
Exhibit 10.44 to the Annual Report on Form 10-K
for 2004 of Cooper Cameron Corporation, and incorporated herein by
reference. |
|
|
|
|
|
|
|
10.45
|
|
Cooper Cameron Corporation Second
Amended and Restated 1995 Stock Option Plan for Non-Employee
Directors (Registration Statement on Form S-8 No. 333-79787),
incorporated herein by reference. |
|
|
|
|
|
|
|
10.46
|
|
First Amendment to the Cooper
Cameron Corporation Second Amended and Restated 1995 Stock Option
Plan for Non-Employee Directors, filed as
Exhibit 10.43 to the Annual Report on Form 10-K
for 2004 of Cooper Cameron Corporation, and incorporated herein by
reference. |
|
|
|
|
|
|
|
10.47*
|
|
Form of Stock Option Agreement for
stock options granted November 10, 2005. |
|
|
|
|
|
|
|
13.1*
|
|
Portions of the 2005 Annual Report to Stockholders are included as an exhibit to this report. |
|
|
|
|
|
|
|
14.1
|
|
Code of Business Conduct and Ethics for Directors incorporated by reference to the Cooper
Cameron Corporation Proxy Statement for the annual meeting of Stockholders held on May 8,
2003. |
|
|
|
|
|
|
|
14.2
|
|
Code of Ethics for Management Personnel, filed as Exhibit 14.2 to the Annual Report on Form
10-K for 2004 of Cooper Cameron Corporation, and incorporated herein by reference. |
|
|
|
|
|
|
|
14.3
|
|
Standards of Conduct, filed as Exhibit 14.3 to the Annual Report on Form 10-K for 2004 of
Cooper Cameron Corporation, and incorporated herein by reference. |
|
|
|
|
|
|
|
21.1*
|
|
Subsidiaries of registrant. |
|
|
|
|
|
|
|
23.1*
|
|
Consent of Independent Registered Public Accounting Firm. |
|
|
|
|
|
|
|
31.1*
|
|
Certifications. |
|
|
|
|
|
|
|
31.2*
|
|
Certifications. |
|
|
|
|
|
|
|
32.1*
|
|
Certifications of Chief Executive Officer and Chief Financial Officer Pursuant to Section
906 of the Sarbanes-Oxley Act of 2002. |
|
|
26