e10vq
Table of Contents

 
 
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM 10-Q
     
þ   QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the quarterly period ended March 31, 2011
OR
     
o   TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
for the transition period from                      To                     
Commission File Number 001-12505
CORE MOLDING TECHNOLOGIES, INC.
(Exact name of registrant as specified in its charter)
     
Delaware   31-1481870
(State or other jurisdiction   (I.R.S. Employer Identification No.)
incorporation or organization)    
     
800 Manor Park Drive, Columbus, Ohio   43228-0183
(Address of principal executive office)   (Zip Code)
Registrant’s telephone number, including area code (614) 870-5000
N/A
Former name, former address and former fiscal year, if changed since last report.
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes þ NO o
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes o NO o
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See definition of “accelerated filer,” “large accelerated filer,” and “smaller reporting company,” in Rule 12b-2 of the Exchange Act (Check one).
             
Large accelerated filer o   Accelerated filer o   Non-accelerated filer o   Smaller reporting company þ
        (Do not check if a smaller reporting company)    
Indicate by check mark whether the registrant is a shell company as defined in Rule 12b-2 of the Exchange Act. Yes o NO þ
As of May 12, 2011, the latest practicable date, 7,152,809 shares of the registrant’s common stock were issued and outstanding.
 
 

 

 


 

Table of Contents
         
       
 
       
       
 
       
    3  
 
       
    4  
 
       
    5  
 
       
    6  
 
       
    7  
 
       
    15  
 
       
    20  
 
       
    21  
 
       
    22  
 
       
    22  
 
       
    22  
 
       
    22  
 
       
    22  
 
       
    22  
 
       
    22  
 
       
    22  
 
       
    23  
 
       
    24  
 
       
 Ex-31(a)
 Ex-31(b)
 Ex-32(a)
 Ex-32(b)

 

2


Table of Contents

Part 1 — Financial Information
Core Molding Technologies, Inc. and Subsidiaries
Consolidated Balance Sheets
                 
    March 31,        
    2011     December 31,  
    (Unaudited)     2010  
Assets
               
Current assets:
               
Cash and cash equivalents
  $ 378,280     $ 5,656,865  
Accounts receivable (less allowance for doubtful accounts: March 31, 2011 — $133,000; December 31, 2010 — $118,000)
    18,973,643       14,746,138  
Inventories:
               
Finished goods
    1,169,516       1,491,886  
Work in process
    1,146,427       1,125,153  
Stores
    7,216,988       5,791,491  
 
           
Total inventories, net
    9,532,931       8,408,530  
 
               
Deferred tax asset-current portion
    1,390,928       1,390,928  
Foreign sales tax receivable
    1,131,765       1,001,039  
Prepaid expenses and other current assets
    1,102,176       874,041  
 
           
Total current assets
    32,509,723       32,077,541  
 
               
Property, plant and equipment
    84,027,259       83,657,334  
Accumulated depreciation
    (41,272,568 )     (40,314,403 )
 
           
Property, plant and equipment — net
    42,754,691       43,342,931  
 
               
Deferred tax asset
    2,519,457       2,519,567  
Goodwill
    1,097,433       1,097,433  
Other assets
    22,139       24,793  
 
           
Total Assets
  $ 78,903,443     $ 79,062,265  
 
           
 
   
Liabilities and Stockholders’ Equity
               
Liabilities:
               
Current liabilities:
               
Current portion of long-term debt
  $ 4,059,289     $ 4,151,420  
Accounts payable
    6,220,682       6,487,983  
Tooling in progress
    250,357       320,041  
Current portion of post retirement benefits liability
    933,000       933,000  
Accrued liabilities:
               
Compensation and related benefits
    3,509,739       3,678,692  
Interest payable
    63,420       67,971  
Taxes
    962,545       456,351  
Other
    910,694       1,065,727  
 
           
Total current liabilities
    16,909,726       17,161,185  
 
               
Long-term debt
    11,362,854       13,581,425  
Interest rate swaps
    273,394       350,916  
Post retirement benefits liability
    9,927,456       9,904,000  
 
           
Total Liabilities
    38,473,430       40,997,526  
 
           
Commitments and Contingencies
           
Stockholders’ Equity:
               
Preferred stock — $0.01 par value, authorized shares — 10,000,000; Outstanding shares: 0 at March 31, 2011 and December 31, 2010
           
Common stock — $0.01 par value, authorized shares — 20,000,000; Outstanding shares: 6,898,545 at March 31, 2011 and 6,880,295 at December 31, 2010
    68,985       68,803  
Paid-in capital
    23,920,799       23,790,263  
Accumulated other comprehensive income, net of income taxes
    3,178,402       3,213,197  
Treasury stock
    (26,253,478 )     (26,253,478 )
Retained earnings
    39,515,305       37,245,954  
 
           
Total Stockholders’ Equity
    40,430,013       38,064,739  
 
           
Total Liabilities and Stockholders’ Equity
  $ 78,903,443     $ 79,062,265  
 
           
See notes to unaudited consolidated financial statements.

 

3


Table of Contents

Core Molding Technologies, Inc. and Subsidiaries
Consolidated Statements of Operations
(Unaudited)
                 
    Three Months Ended  
    March 31,  
    2011     2010  
Net sales:
               
Products
  $ 28,974,420     $ 19,695,932  
Tooling
    14,881       746,108  
 
           
Total sales
    28,989,301       20,442,040  
 
               
Total cost of sales
    22,397,054       16,358,116  
 
           
 
               
Gross margin
    6,592,247       4,083,924  
 
               
Total selling, general and administrative expense
    2,923,252       2,325,936  
 
           
 
               
Income before interest and taxes
    3,668,995       1,757,988  
 
               
Interest expense
    181,388       420,183  
 
           
 
               
Income before income taxes
    3,487,607       1,337,805  
 
               
Income tax expense
    1,218,256       1,474,747  
 
           
 
               
Net income (loss)
  $ 2,269,351     $ (136,942 )
 
           
 
               
Net income (loss) per common share:
               
Basic
  $ 0.33     $ (0.02 )
 
           
Diluted
  $ 0.31     $ (0.02 )
 
           
 
               
Weighted average shares outstanding:
               
Basic
    6,892,288       6,799,641  
 
           
Diluted
    7,240,808       6,799,641  
 
           
See notes to unaudited consolidated financial statements.

 

4


Table of Contents

Core Molding Technologies, Inc. and Subsidiaries
Consolidated Statement of Stockholders’ Equity
(Unaudited)
                                                         
                                    Accumulated                
    Common Stock                     Other             Total  
    Outstanding     Paid-In     Retained     Comprehensive     Treasury     Stockholders’  
    Shares     Amount     Capital     Earnings     Income     Stock     Equity  
Balance at December 31, 2010
    6,880,295     $ 68,803     $ 23,790,263     $ 37,245,954     $ 3,213,197     $ (26,253,478 )   $ 38,064,739  
 
   
Net Income
                            2,269,351                       2,269,351  
 
                                                       
Change in post retirement benefits, net of tax of $20,655
                                    (48,595 )             (48,595 )
 
                                                       
Change in interest rate swaps, net of tax of $7,109
                                    13,800               13,800  
 
                                                     
 
                                                       
Comprehensive Income
                                                    2,234,556  
 
                                                       
Common stock issued
    18,250       182       57,250                               57,432  
 
                                                       
Share-based compensation
                    73,286                               73,286  
 
                                         
 
                                                       
Balance at March 31, 2011
    6,898,545     $ 68,985     $ 23,920,799     $ 39,515,305     $ 3,178,402     $ (26,253,478 )   $ 40,430,013  
 
                                         
See notes to unaudited consolidated financial statements.

 

5


Table of Contents

Core Molding Technologies, Inc. and Subsidiaries
Consolidated Statements of Cash Flows
(Unaudited)
                 
    Three Months Ended  
    March 31,  
    2011     2010  
Cash flows from operating activities:
               
 
               
Net income (loss)
  $ 2,269,351     $ (136,942 )
 
               
Adjustments to reconcile net income (loss) to net cash used in operating activities:
               
 
               
Depreciation and amortization
    983,587       989,590  
Deferred income taxes
    110       1,021,501  
Mark-to-market of interest rate swaps
    (63,612 )     96,799  
Share-based compensation
    73,287       75,964  
Gain on translation of foreign currency financial statements
    (150,853 )     (135,769 )
Change in operating assets and liabilities:
               
Accounts receivable
    (4,227,505 )     (1,187,253 )
Inventories
    (1,124,401 )     (3,238,093 )
Prepaid and other assets
    (381,626 )     (222,076 )
Accounts payable
    (142,561 )     585,125  
Accrued and other liabilities
    107,860       1,845,299  
Post retirement benefits liability
    (25,139 )     302,152  
 
           
Net cash used in operating activities
    (2,681,502 )     (3,703 )
 
           
 
               
Cash flows from investing activities:
               
 
               
Purchase of property, plant and equipment
    (343,813 )     (753,405 )
 
           
Net cash used in investing activities
    (343,813 )     (753,405 )
 
           
 
               
Cash flows from financing activities:
               
 
               
Payment of principal on Mexican loan
    (1,600,000 )      
Payment of principal on capex loan
    (428,571 )     (428,571 )
Payment of principal on term loan
    (107,131 )     (321,429 )
Payment of principal on industrial revenue bond
    (175,000 )     (165,000 )
Proceeds from issuance of common stock
    57,432        
 
           
Net cash used in financing activities
    (2,253,270 )     (915,000 )
 
           
 
   
Net change in cash and cash equivalents
    (5,278,585 )     (1,672,108 )
 
   
Cash and cash equivalents at beginning of period
    5,656,865       4,141,838  
 
           
 
   
Cash and cash equivalents at end of period
  $ 378,280     $ 2,469,730  
 
           
 
   
Cash paid for:
               
Interest
  $ 204,939     $ 284,030  
 
           
Income taxes (net of tax refunds)
  $ 540,000     $ 37,812  
 
           
Non Cash:
               
Fixed asset purchases in accounts payable
  $ 77,360     $ 56,953  
 
           
See notes to unaudited consolidated financial statements.

 

6


Table of Contents

Core Molding Technologies, Inc. and Subsidiaries
Notes to Consolidated Financial Statements
(Unaudited)
1. Basis of Presentation
The accompanying unaudited consolidated financial statements have been prepared in accordance with the instructions to Form 10-Q and include all of the information and disclosures required by accounting principles generally accepted in the United States of America for interim reporting, which are less than those required for annual reporting. In the opinion of management, the accompanying unaudited consolidated financial statements contain all adjustments (all of which are normal and recurring in nature) necessary to present fairly the financial position of Core Molding Technologies, Inc. and its subsidiaries (“Core Molding Technologies” or the “Company”) at March 31, 2011, and the results of operations and cash flows for the three months ended March 31, 2011. The “Notes to Consolidated Financial Statements,” which are contained in the 2010 Annual Report to Shareholders, should be read in conjunction with these consolidated financial statements.
Core Molding Technologies and its subsidiaries operate in the plastics market in a family of products known as “reinforced plastics.” Reinforced plastics are combinations of resins and reinforcing fibers (typically glass or carbon) that are molded to shape. Core Molding Technologies operates four production facilities in Columbus, Ohio; Batavia, Ohio; Gaffney, South Carolina; and Matamoros, Mexico. The Columbus, Matamoros and Gaffney facilities produce reinforced plastics by compression molding sheet molding compound (“SMC”) in a closed mold process. The Batavia facility produces reinforced plastic products by a robotic spray-up open mold process and resin transfer molding (“RTM”) closed mold process utilizing multiple insert tooling (“MIT”). The Matamoros facility also utilizes spray-up and hand lay-up open mold processes, and RTM closed mold process to produce reinforced plastic products.
2. Net Income (Loss) per Common Share
Net income (loss) per common share is computed based on the weighted average number of common shares outstanding during the period. Diluted net income per common share is computed similarly but includes the effect of the assumed exercise of dilutive stock options and restricted stock under the treasury stock method.
The computation of basic and diluted net income (loss) per common share is as follows:
                 
    Three Months Ended  
    March 31,  
    2011     2010  
 
               
Net income (loss)
  $ 2,269,351     $ (136,942 )
 
               
Weighted average common shares outstanding
    6,892,288       6,799,641  
Effect of dilutive securities:
               
Stock options
    238,394        
Restricted stock
    110,126        
 
           
Weighted average common and potentially issuable common shares outstanding — diluted
    7,240,808       6,799,641  
 
           
 
               
Basic net income (loss) per common share
  $ 0.33     $ (0.02 )
Diluted net income (loss) per common share
  $ 0.31     $ (0.02 )
23,000 stock options at March 31, 2011 and 570,225 stock options at March 31, 2010 were not included in diluted earnings per share as they were anti-dilutive.

 

7


Table of Contents

3. Sales
The Company currently has two major customers, Navistar, Inc. (“Navistar”), and PACCAR, Inc. (“PACCAR”). Major customers are defined as customers whose sales individually consist of more than ten percent of total sales during any reporting period. The following table presents sales revenue for the above-mentioned customers for the three months ended March 31, 2011 and 2010:
                 
    Three Months Ended  
    March 31,  
    2011     2010  
 
               
Navistar product sales
  $ 13,772,891     $ 10,896,669  
Navistar tooling sales
          428,925  
 
           
Total Navistar sales
    13,772,891       11,325,594  
 
               
PACCAR product sales
    9,027,862       5,787,110  
PACCAR tooling sales
          245,495  
 
           
Total PACCAR sales
    9,027,862       6,032,605  
 
               
Other product sales
    6,173,667       3,012,153  
Other tooling sales
    14,881       71,688  
 
           
Total other sales
    6,188,548       3,083,841  
 
               
Total product sales
    28,974,420       19,695,932  
Total tooling sales
    14,881       746,108  
 
           
Total sales
  $ 28,989,301     $ 20,442,040  
 
           
4. Comprehensive Income (Loss)
Comprehensive income (loss) represents net income (loss) plus the results of certain equity changes not reflected in the Consolidated Statements of Operations. The components of comprehensive income (loss), net of tax, are as follows:
                 
    Three Months Ended  
    March 31,  
    2011     2010  
 
               
Net income (loss)
  $ 2,269,351     $ (136,942 )
 
               
Change in post retirement benefits, net of tax benefit of $20,655 and tax expense of $9,960 for the three months ended March 31, 2011 and 2010, respectively
    (48,595 )     18,809  
 
               
Change in interest rate swaps, net of tax of $7,109 and $10,503 for the three months ended March 31, 2011 and 2010, respectively
    13,800       20,389  
 
           
 
               
Comprehensive income (loss)
  $ 2,234,556     $ (97,744 )
 
           

 

8


Table of Contents

5. Post Retirement Benefits
The components of expense for all of the Company’s post retirement benefit plans for the three months ended March 31, 2011 and 2010 are as follows:
                 
    Three Months Ended  
    March 31,  
    2011     2010  
Pension expense:
               
Defined contribution plan contributions
  $ 166,000     $ 111,000  
Multi-employer plan contributions
    94,000       122,000  
 
           
Total pension expense
    260,000       233,000  
 
           
 
               
Health and life insurance:
               
Service cost
          93,000  
Interest cost
    133,000       269,000  
Amortization of prior service costs
    (124,000 )      
Amortization of net loss
    55,000       29,000  
 
           
Net periodic benefit cost
    64,000       391,000  
 
           
 
               
Total post retirement benefits expense
  $ 324,000     $ 624,000  
 
           
The Company made payments of $130,000 to pension plans and $96,000 for post retirement healthcare during the three months ended March 31, 2011. For the remainder of 2011 the Company expects to make approximately $765,000 of pension plan payments, of which $408,000 was accrued at March 31, 2011. The Company also expects to make approximately $837,000 of post retirement healthcare and life insurance payments for the remainder of 2011, all of which are accrued at March 31, 2011.
On August 7, 2010, the Company entered into a new collective bargaining agreement with employees represented by the International Association of Machinists and Aerospace Workers at the Company’s Columbus, Ohio production facility. As part of the new agreement, the post retirement health and life insurance benefits for all current and future represented employees who were not retired as of August 7, 2010 were eliminated in exchange for a one-time cash payment of $1,257,000. Individuals who retired prior to August 7, 2010 remain eligible for post retirement health and life insurance benefits.
The elimination of post retirement health and life insurance benefits described above resulted in a reduction of the Company’s post retirement benefits liability of approximately $10,282,000. This reduction in post retirement benefits liability was treated as a negative plan amendment and is being amortized as a reduction to net periodic benefit cost over approximately twenty years, the remaining life expectancy of the remaining participants in the plan. This negative plan amendment will result in net periodic benefit cost reductions of approximately $496,000 per year in 2011 and thereafter, and lower interest costs associated with the reduced post retirement benefits liability. The plan was remeasured using a discount rate of 5.1% at the time of the negative plan amendment.
6. Debt
Credit Agreement
In 2008, the Company and its wholly owned subsidiary, CoreComposites de Mexico, S. de R.L. de C.V., entered into a credit agreement (the “Credit Agreement”) to refinance certain existing debt and borrow funds to finance the construction of the Company’s new manufacturing facility in Mexico.
Under this Credit Agreement, the Company received certain loans, subject to the terms and conditions stated in the agreement, which included (1) a $12,000,000 Capex loan; (2) an $8,000,000 Mexican loan; (3) an $8,000,000 variable rate revolving line of credit; (4) a $2,678,563 term loan to refinance an existing term loan; and (5) a letter of credit in an undrawn face amount of $3,332,493 with respect to the Company’s existing industrial development revenue bond financing. The Credit Agreement is secured by a guarantee of each U.S. subsidiary of the Company, and by a lien on substantially all of the present and future assets of the Company and its U.S. subsidiaries, except that only 65% of the stock issued by CoreComposites de Mexico, S. de C.V. has been pledged. The $8,000,000 Mexican loan is also secured by substantially all of the present and future assets of the Company’s Mexican subsidiary.

 

9


Table of Contents

As disclosed in the 2010 Annual Report to Shareholders on Form 10-K, the Company plans to add additional capacity to its Matamoros, Mexico facility to meet demand in 2012 and beyond. The Company expects to invest approximately $14,000,000 for this capacity expansion, of which approximately $11,000,000 is planned to be spent in 2011. To finance this capacity expansion, the Company received an additional financing commitment from its primary lender during the second quarter of 2011.
Revolving Line of Credit
At March 31, 2011, the Company had available an $8,000,000 variable rate revolving line of credit, scheduled to mature on April 30, 2012. The revolving line of credit bears interest at daily LIBOR plus 275 basis points and is collateralized by all of the present and future assets of the Company and its U.S. subsidiaries (except that only 65% of the stock issued by CoreComposites de Mexico, S. de C.V. has been pledged). At March 31, 2011 and December 31, 2010 there was no outstanding balance under the revolving line of credit.
Bank Covenants
The Company is required to meet certain financial covenants included in the Credit Agreement with respect to leverage ratios, fixed charge ratios, capital expenditures as well as other customary affirmative and negative covenants. As of March 31, 2011, the Company was in compliance with its financial covenants associated with the loans made under the Credit Agreement as described above.
Management regularly evaluates the Company’s ability to meet its debt covenants based on the Company’s forecasts. Based upon the Company’s forecasts, which are primarily based on industry analysts’ estimates of heavy and medium-duty truck production volumes, as well as other assumptions and considering the additional financing commitment noted above, management believes that the Company will be able to maintain compliance with its financial covenants for the next 12 months.
Management believes that cash flow from operating activities, available borrowings under the Credit Agreement and the additional financing commitment noted above will be sufficient to meet the Company’s liquidity needs. If a material adverse change in the financial position of the Company should occur, or if actual sales or expenses are substantially different than what has been forecasted, the Company’s liquidity and ability to obtain further financing to fund future operating and capital requirements could be negatively impacted.
Interest Rate Swaps
In conjunction with its variable rate IRB, the Company entered into an interest rate swap agreement through April 2013, which was initially designated as a cash flow hedging instrument. Under this agreement, the Company pays a fixed rate of 4.89% to the bank and receives 76% of the 30-day commercial paper rate. During 2010 the Company determined this interest rate swap was no longer highly effective. As a result, the Company discontinued the use of hedge accounting effective January 1, 2010 related to this swap, and began recording mark-to-market adjustments within interest expense in the Company’s Consolidated Statement of Operations. The pre-tax amount previously recognized in Accumulated Other Comprehensive Income (Loss), totaling $(199,990) as of December 31, 2009, is being amortized as an increase to interest expense of $3,384 per month, net of tax, over the remaining term of the interest rate swap agreement beginning January 2010. The fair value of the swap was a liability of $103,082 and $126,095 as of March 31, 2011 and December 31, 2010, respectively. The Company recorded interest income of $23,013 for a mark-to-market adjustment of swap fair value for the first three months of 2011 related to this swap. The notional amount of the swap at March 31, 2011 and December 31, 2010 was $1,765,000 and $1,940,000, respectively.
Effective January 1, 2004, the Company entered into an interest rate swap agreement, which is designated as a cash flow hedge of the Term loan. This swap agreement expired in January 2011 along with the final maturity of the secured term loan to which the swap related. Under this agreement, the Company paid a fixed rate of 5.75% to the bank and received LIBOR plus 200 basis points. The swap term and notional amount matched the payment schedule on the secured Term loan which came to final maturity in January 2011. The interest rate swap was a highly effective hedge because the amount, benchmark interest rate index, term, and repricing dates of both the interest rate swap and the hedged variable interest cash flows were substantially the same. As of March 31, 2011 there was no liability under this swap agreement. As of December 31, 2010 the fair value of the swap was a liability of $322. The notional amount of the swap at December 31, 2010 was $107,131.

 

10


Table of Contents

Effective December 18, 2008, the Company entered into an interest rate swap agreement that became effective May 1, 2009, which was designated as a cash flow hedge of the $12,000,000 Capex loan. Under this agreement, the Company pays a fixed rate of 2.295% to the counterparty and receives LIBOR. Effective March 31, 2009, the interest terms in the Company’s Credit Agreement related to the $12,000,000 Capex loan were amended. The Company then determined that the interest rate swap was no longer highly effective. As a result, the Company discontinued the use of hedge accounting effective March 31, 2009 related to this swap, and began recording mark-to-market adjustments within interest expense in the Company’s Consolidated Statement of Operations. The pre-tax amount previously recognized in Accumulated Other Comprehensive Income (Loss), totaling $(145,684) as of March 31, 2009, is being amortized as an increase to interest expense of $1,145 per month, net of tax, over the remaining term of the interest rate swap agreement beginning June 2009. The fair value of the swap as of March 31, 2011 and December 31, 2010 was a liability of $170,312 and $224,499, respectively. The Company recorded interest income of $54,187 for a mark-to-market adjustment of swap fair value for the first three months of 2011 related to this swap. The notional amount of the swap at March 31, 2011 and December 31, 2010, was $8,857,143 and $9,285,714, respectively.
7. Income Taxes
In the first quarter of 2010 the Patient Protection and Affordable Care Act (“PPACA”) was signed into law. The PPACA changed the tax treatment related to an existing retiree drug subsidy (“RDS”) available to sponsors of retiree health benefit plans that provide a benefit that is at least actuarially equivalent to the benefits under Medicare Part D. As a result of the PPACA, RDS payments will effectively become taxable in tax years beginning in 2013 by requiring the amount of the subsidy received to be offset against the Company’s deduction for health care expenses. Accordingly, during the first quarter of 2010, the Company recorded a one time charge to income tax expense of $1,021,000 related to the write down of its deferred tax asset for RDS.
The Consolidated Balance Sheets at March 31, 2011 and December 31, 2010, include a net deferred tax asset of $3,910,385 and $3,910,495, respectively. The Company performs analyses to evaluate the balance of deferred tax assets that will be realized. Such analyses are based on the premise that the Company is, and will continue to be, a going concern and that it is more likely than not that deferred tax benefits will be realized through the generation of future taxable income.
Income tax expense for the three months ended March 31, 2011 is estimated to be approximately $1,218,256, or 35% of income before income taxes. Income tax expense for the three months ended March 31, 2010 was estimated to be approximately $1,474,747, or 110% of total earnings before taxes. Without the write down of the aforementioned deferred tax asset, the Company’s effective tax rate was estimated to be 34% for the three months ended March 31, 2010.
The Company follows accounting guidance related to uncertainty in income taxes. As of March 31, 2011, the Company had no liability for unrecognized tax benefits under this guidance. The Company does not anticipate that the unrecognized tax benefits will significantly change within the next twelve months.
The Company files income tax returns in the U.S. federal jurisdiction, Mexico and various state jurisdictions. The Company is no longer subject to U.S. federal and state income tax examinations by tax authorities for the years before 2008 and is subject to income tax examinations by Mexican authorities since the Company began business in Mexico in 2001. There are currently no income tax audits in process.
8. Stock Based Compensation
The Company has a Long Term Equity Incentive Plan (the “2006 Plan”), as approved by the Company’s stockholders in May 2006. This 2006 Plan replaced the Long Term Equity Incentive Plan (the “Original Plan”) as originally approved by the stockholders in May 1997 and as amended in May 2000. The 2006 Plan allows for grants to directors and key employees of non-qualified stock options, incentive stock options, stock appreciation rights, restricted stock, performance shares, performance units and other incentive awards (“Stock Awards”) up to an aggregate of 3,000,000 awards, each representing a right to buy a share of Core Molding Technologies common stock. Stock Awards can be granted under the 2006 Plan through the earlier of December 31, 2015, or the date the maximum number of available awards under the 2006 Plan have been granted.

 

11


Table of Contents

Stock Options
The following summarizes the activity relating to stock options under the plans mentioned above for the three months ended March 31, 2011:
                 
    Number     Weighted  
    of     Average  
    Options     Exercise Price  
Outstanding at December 31, 2010
    520,275     $ 3.31  
Exercised
    (18,250 )     3.15  
Granted
           
Forfeited
           
 
           
Outstanding at March 31, 2011
    502,025     $ 3.32  
 
           
Exercisable at March 31, 2011
    476,225     $ 3.35  
 
           
The following summarizes the status of, and changes to, unvested options during the three months ended March 31, 2011:
                 
    Number     Weighted  
    Of     Average  
    Options     Exercise Price  
Unvested at December 31, 2010
    25,800     $ 2.75  
Granted
           
Vested
           
Forfeited
           
 
           
Unvested at March 31, 2011
    25,800     $ 2.75  
 
           
At March 31, 2011 and 2010, there was $20,840 and $48,454, respectively, of total unrecognized compensation expense, related to unvested stock options granted under the plan. That cost is expected to be recognized over the weighted-average period of 2.5 years. Total compensation cost related to incentive stock options for the three months ended March 31, 2011 and 2010 was $1,294 and $14,048, respectively. This compensation expense is allocated such that $1,294 and $13,288 are included in selling, general and administrative expenses and $0 and $760 are recorded in cost of sales for the three months ended March 31, 2011 and 2010, respectively.
Restricted Stock
In 2006, the Company began granting shares of its common stock to certain directors, officers, and key managers in the form of unvested stock (“Restricted Stock”). These awards are recorded at the market value of Core Molding Technologies’ common stock on the date of issuance and amortized ratably as compensation expense over the applicable vesting period.
The following summarizes the status of Restricted Stock grants as of March 31, 2011 and changes during the three months ended March 31, 2011:
                 
            Weighted  
    Number     Average  
    Of     Grant Date  
    Shares     Fair Value  
Unvested balance at December 31, 2010
    203,797     $ 3.91  
Granted
           
Vested
           
Forfeited
           
 
           
Unvested balance at March 31, 2011
    203,797     $ 3.91  
 
           
As of March 31, 2011 and 2010, there was $385,447 and $324,494, respectively, of total unrecognized compensation expense related to Restricted Stock granted under the 2006 Plan. That cost is expected to be recognized over the weighted-average period of 1.7 years. Total compensation costs related to restricted stock grants for the three months ended March 31, 2011 and 2010 were $71,993 and $61,916, respectively, all of which was recorded to selling, general and administrative expense.

 

12


Table of Contents

9. Fair Value of Financial Instruments
The Company’s financial instruments consist of long-term debt, interest rate swaps, accounts receivable, and accounts payable. The carrying amount of these financial instruments approximated their fair value.
In September 2006, the Financial Accounting Standards Board (“FASB”) issued a standard to define fair value, establish a framework for measuring fair value and to expand disclosures about fair value measurements. This standard does not change the requirements to apply fair value in existing accounting standards. Under this standard, fair value refers to the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants in the market in which the reporting entity transacts. The standard clarifies that fair value should be based on the assumptions market participants would use when pricing the asset or liability.
To increase consistency and comparability in fair value measurements, this standard establishes a fair value hierarchy that prioritizes the inputs to valuation techniques used to measure fair value into three levels. The level in the fair value hierarchy disclosed is based on the lowest level of input that is significant to the fair value measurement. The three levels of the fair value hierarchy are as follows:
   
Level 1 inputs are quoted prices (unadjusted) in active markets for identical asset or liabilities that the company has the ability to access as of the reporting date.
 
   
Level 2 inputs are inputs other than quoted prices included within Level 1 that are observable for the asset or liability, either directly or indirectly through corroboration with observable market data.
 
   
Level 3 inputs are unobservable inputs, such as internally developed pricing models for the asset or liability due to little or no market activity for the asset or liability.
The Company has three Level 2 fair value measurements all of which relate to the Company’s interest rate swaps. The Company utilizes interest rate swap contracts to manage its targeted mix of fixed and floating rate debt, and these swaps are valued using observable benchmark rates at commonly quoted intervals for the full term of the swaps. These interest rate swaps are discussed in detail in Note 6.
The following table presents financial liabilities measured and recorded at fair value on the Company’s Consolidated Balance Sheets on a recurring basis and their level within the fair value hierarchy as of March 31, 2011 and December 31, 2010:
                                 
                            Total Liabilities as of  
    (Level 1)     (Level 2)     (Level 3)     March 31, 2011  
 
                               
Interest rate swap liabilities
  $     $ 273,394     $     $ 273,394  
                                 
                            Total Liabilities as of  
    (Level 1)     (Level 2)     (Level 3)     December 31, 2010  
 
                               
Interest rate swap liabilities
  $     $ 350,916     $     $ 350,916  
There were no non-recurring fair value measurements for the quarter ended March 31, 2011.
Core Molding Technologies derivative instruments located on the Consolidated Balance Sheets were as follows:
                     
    Balance Sheet   March 31,     December 31, 2010  
    Location   2011 Fair Value     Fair Value  
Derivatives designated as hedging instruments
                   
Interest rate risk activities
  Interest rate swaps   $     $ 322  
 
                   
Derivatives not designated as hedging instruments
                   
Interest rate risk activities
  Interest rate swaps   $ 273,394     $ 350,594  
 
               
 
Total
      $ 273,394     $ 350,916  
 
               

 

13


Table of Contents

The effect of derivative instruments on the Consolidated Statements of Operations was as follows:
Derivatives in Cash Flow Hedging Relationships
                                         
                    Location of Gain        
                    (Loss) Reclassified        
Derivatives in Cash   Amount of Gain (Loss)     from AOCI into     Amount of Gain (Loss)  
Flow Hedging   Recognized in OCI on     Income     Reclassified from AOCI into  
Relationships   Derivative (Effective Portion)     (Effective Portion)     Expense (Effective Portion)  
    March 31,     March 31,             March 31,     March 31,  
Three months ended   2011     2010             2011     2010  
Interest rate swaps
  $ 322     $ 10,304     Interest expense, net     $     $ (10,373 )
Derivatives not designated as hedging instruments
                     
        Amount of Realized/Unrealized Gain  
Derivatives Not Designated as   Location of Gain (Loss) Recognized   (Loss) Recognized in Income on  
Hedging Instruments   in Income on Derivative   Derivatives  
        March 31,     March 31,  
Three months ended       2011     2010  
Interest rate swaps
  Interest income (expense)   $ 63,613     $ (96,799 )
As discussed in Note 6, the Company discontinued the use of hedge accounting for two of its interest rate swaps, effective March 31, 2009 for the Capex swap and January 1, 2010 for the IRB swap. The Company now records all mark to market adjustments related to these interest rate swaps within interest expense in the Company’s Consolidated Statements of Operations, since the date the Company discontinued hedge accounting for each swap. It is anticipated that during the next twelve months the expiration and settlement of cash flow hedge contracts along with the amortization of losses on discontinued hedges will result in income statement recognition of amounts currently classified in accumulated other comprehensive loss of approximately $54,350, net of taxes.

 

14


Table of Contents

Part I — Financial Information
Item 2.  
Management’s Discussion and Analysis of Financial Condition and Results of Operations
This Management’s Discussion and Analysis of Financial Condition and Results of Operations contains forward-looking statements within the meaning of the federal securities laws. As a general matter, forward-looking statements are those focused upon future plans, objectives or performance as opposed to historical items and include statements of anticipated events or trends and expectations and beliefs relating to matters not historical in nature. Such forward-looking statements involve known and unknown risks and are subject to uncertainties and factors relating to Core Molding Technologies operations and business environment, all of which are difficult to predict and many of which are beyond Core Molding Technologies’ control. These uncertainties and factors could cause Core Molding Technologies’ actual results to differ materially from those matters expressed in or implied by such forward-looking statements.
Core Molding Technologies believes that the following factors, among others, could affect its future performance and cause actual results to differ materially from those expressed or implied by forward-looking statements made in this report: business conditions in the plastics, transportation, watercraft and commercial product industries; federal and state regulations (including engine emission regulations); general economic, social and political environments in the countries in which Core Molding Technologies operates; safety and security conditions in Mexico; dependence upon two major customers as the primary source of Core Molding Technologies’ sales revenues; recent efforts of Core Molding Technologies to expand its customer base; the actions of competitors, customers, and suppliers; failure of Core Molding Technologies’ suppliers to perform their obligations; the availability of raw materials; inflationary pressures; new technologies; regulatory matters; labor relations; the loss or inability of Core Molding Technologies to attract and retain key personnel; federal, state and local environmental laws and regulations; the availability of capital; the ability of Core Molding Technologies to provide on-time delivery to customers, which may require additional shipping expenses to ensure on-time delivery or otherwise result in late fees; risk of cancellation or rescheduling of orders; risks related to the transfer of production from Core Molding Technologies’ Columbus facility to its Matamoros facility; management’s decision to pursue new products or businesses which involve additional costs, risks or capital expenditures; and other risks identified from time-to-time in Core Molding Technologies’ other public documents on file with the Securities and Exchange Commission, including those described in Item 1A of the 2010 Annual Report to Shareholders on Form 10-K.
Description of the Company
Core Molding Technologies is a manufacturer of sheet molding compound (“SMC”) and molder of fiberglass reinforced plastics, primarily for the medium and heavy-duty truck market, which accounted for 90% of the Company’s sales for the three months ended March 31, 2011. Core Molding Technologies produces high quality fiberglass reinforced molded products and SMC materials for varied markets, including light, medium and heavy-duty trucks, automobiles and automotive aftermarkets, personal watercraft, and other commercial products. The demand for Core Molding Technologies’ products is affected by economic conditions in the United States, Canada, and Mexico. Core Molding Technologies’ manufacturing operations have a significant fixed cost component. Accordingly, during periods of changing demand, the profitability of Core Molding Technologies’ operations may change proportionately more than revenues from operations.
On December 31, 1996, Core Molding Technologies acquired substantially all of the assets and assumed certain liabilities of Columbus Plastics, a wholly owned operating unit of Navistar’s truck manufacturing division since its formation in late 1980. Columbus Plastics, located in Columbus, Ohio, was a compounder and compression molder of SMC. In 1998, Core Molding Technologies began compression molding operations at its second facility in Gaffney, South Carolina, and in October 2001, Core Molding Technologies acquired certain assets of Airshield Corporation. As a result of this acquisition, Core Molding Technologies expanded its fiberglass molding capabilities to include the spray up, hand-lay-up open mold processes and resin transfer (“RTM”) closed molding utilizing a vacuum infusion process. In September 2004, Core Molding Technologies acquired substantially all the operating assets of Keystone Restyling Products, Inc., a privately held manufacturer and distributor of fiberglass reinforced products for the automotive-aftermarket industry. In August 2005, Core Molding Technologies acquired certain assets of the Cincinnati Fiberglass Division of Diversified Glass, Inc., a Batavia, Ohio-based, privately held manufacturer and distributor of fiberglass reinforced plastic components supplied primarily to the heavy-duty truck market. The Batavia, Ohio facility produces reinforced plastic products by a spray-up open mold process and resin transfer molding (“RTM”) utilizing multiple insert tooling (“MIT”) closed mold process. In June of 2009, the Company completed construction of its new 437,000 square foot production facility in Matamoros, Mexico that replaced its leased facility. In conjunction with the construction of its new facility, the Company also added compression molding operations in Matamoros, Mexico.

 

15


Table of Contents

Overview
For the three months ended March 31, 2011 the Company recorded net income of $2,269,000 or $0.33 per basic and $0.31 per diluted share, compared with a net loss of $137,000, or $0.02 per basic and diluted share, for the three months ended March 31, 2010. Negatively impacting the net loss for the three months ended March 31, 2010 was a charge to income tax expense of $1,021,000 related to the Patient Protection and Affordable Care Act (“PPACA”), which repealed the tax benefits the Company previously received related to certain retiree prescription drug costs. Additionally, during the three months ended March 31, 2010, the Company recorded approximately $320,000 of expenses for transfer costs associated with the move of certain product lines from its Columbus, Ohio production facility to its Matamoros, Mexico production facility.
For the first three months of 2011, product sales increased 47% as compared to the same period in 2010, which is primarily the result of increased demand from North American medium and heavy-duty truck customers, as well as increased sales from new business awards.
Looking forward, the Company anticipates 2011 sales levels to continue to increase, as industry analysts continue to forecast increased volume in truck production for the remainder of 2011.
Results of Operations
Three Months Ended March 31, 2011, As Compared To Three Months Ended March 31, 2010
Net sales for the three months ended March 31, 2011 totaled $28,989,000, representing an approximate 42% increase from the $20,442,000 reported for the three months ended March 31, 2010. Included in total sales were tooling project sales of $15,000 and $746,000 for the three months ended March 31, 2011 and 2010, respectively. Tooling project sales result from billings to customers primarily for molds and assembly equipment specific to their products as well as other non-production billings. These sales are sporadic in nature and fluctuate in regard to scope and related revenue on a period-to-period basis. Total product sales, excluding tooling project sales, were approximately 47% higher for the three months ended March 31, 2011, as compared to the same period a year ago. The primary reason for the increase is higher demand from North American medium and heavy-duty truck customers. Increased demand for the Company’s products and awards of new business had a favorable impact on sales of $10,498,000. This increase was offset by the effects of pricing which decreased product sales by approximately $1,220,000. The decrease in pricing was primarily the result of the transfer of certain products to the Company’s Matamoros, Mexico production facility.
Sales to Navistar totaled $13,773,000 for the three months ended March 31, 2011, increasing 22% from $11,326,000 in sales for the three months ended March 31, 2010. Product sales to Navistar increased by 26% for the three months ended March 31, 2011 as compared to the same period in the prior year. The primary reason for the increase in product sales is higher demand for North American medium and heavy-duty trucks. This increase was partially off-set by decreased pricing for certain products transferred to the Company’s Matamoros, Mexico production facility during 2010. There were no tooling sales to Navistar for the three months ended March 31, 2011 compared to $429,000 in tooling sales for the same three months in 2010.
Sales to PACCAR totaled $9,028,000 for the three months ended March 31, 2011, increasing 50% from $6,033,000 in sales for the three months ended March 31, 2010. Product sales to PACCAR increased by 56% for the three months ended March 31, 2011 as compared to the same period in the prior year. The primary reasons for the increase in product sales is higher demand for North American medium and heavy-duty trucks as noted above as well as increased demand for truck models for which the Company provides content. There were no tooling sales to PACCAR for the three months ended March 31, 2011 compared to $245,000 in tooling sales for the same three months in 2010.
Sales to other customers for the three months ended March 31, 2011 increased 101% to $6,189,000 compared to $3,084,000 for the three months ended March 31, 2010. Included in total sales was $15,000 of tooling sales for the three months ended March 31, 2011 compared to $72,000 for the same three months in 2010. Product sales to other customers increased by 105% for the three months ended March 31, 2011 as compared to the same period in the prior year, with approximately 44% of the increase resulting from increased product sales to other medium and heavy-duty truck manufacturers. The remaining increase in other product sales was due to increased demand for the Company’s products from customers outside of the medium and heavy-duty truck market.
Gross margin was approximately 23% of sales for the three months ended March 31, 2011, compared with 20% for the three months ended March 31, 2010. Contributing approximately 5% to gross margin as a percent of sales for 2011 were lower labor and benefit costs. Labor costs decreased primarily due to improved efficiencies. Benefit costs decreased primarily due to lower health care costs including lower post retirement health benefit costs. Included in cost of sales for the three months ended March 31, 2010 were approximately $313,000 of costs associated with transferring certain operations to the Company’s production facility in Mexico. There were no such costs for the same period in 2011, as the transfer of these operations was completed in 2010. The decrease in these costs had a favorable impact of approximately 1.5% of sales to gross margin for the three months ended March 31, 2011. Partially offsetting these were higher material costs and a change in sales mix, which negatively impacted gross margin by 2.4% and 0.6%, respectively, for the three months ended March 31, 2011.

 

16


Table of Contents

Selling, general and administrative expense (“SG&A”) was $2,923,000 for the three months ended March 31, 2011, compared to $2,326,000 for the three months ended March 31, 2010. The primary reason for the increase was higher employee profit sharing expense of $495,000 and higher labor and benefit costs of approximately $150,000. These costs were partially offset by lower professional and outside service expense of $85,000.
Interest expense totaled $181,000 for the three months ended March 31, 2011, compared to interest expense of $420,000 for the three months ended March 31, 2010. The primary cause of the decrease was mark to market adjustments on the Company’s interest rate swaps. In the three months ended March 31, 2011 approximately $64,000 of income was recorded related to the mark to market of the Company’s interest rate swaps as compared to approximately $97,000 of expense for the three months ended March 31, 2010. Also contributing to the decrease in interest expense were reductions to interest rates on outstanding borrowings under the Credit Agreement, as amended, as well as reductions in outstanding loan balances due to regularly scheduled principal payments.
Income tax expense for the three months ended March 31, 2011 was approximately 35% of total income before income taxes. Income tax expense for the three months ended March 31, 2010 was approximately 110% of total earnings before taxes. The Company’s effective rate in 2010 includes the impact of the write off of deferred tax assets of $1,021,000. The deferred tax write off was due to the passage of the PPACA which repealed the tax benefit associated with certain retiree prescription drug subsidies previously recorded by the Company. Without this charge the Company’s estimated tax rate was 34% for the three months ended March 31, 2010.
Core Molding Technologies recorded net income for the three months ended March 31, 2011 of $2,269,000 or $0.33 per basic and $0.31 per diluted share, compared with a net loss of $137,000, or $0.02 per basic and diluted share, for the three months ended March 31, 2010.
Liquidity and Capital Resources
The Company’s primary sources of funds have been cash generated from operating activities and borrowings from third parties. Primary cash requirements are for operating expenses and capital expenditures.
Cash used in operating activities for the three months ended March 31, 2011 totaled $2,682,000. Changes in working capital reduced cash flows from operating activities by $5,793,000. Changes in working capital primarily relate to an increase in accounts receivable due to increased product sales as well as higher inventory levels. Net income of $2,269,000 positively impacted operating cash flows. Non-cash deductions of depreciation and amortization contributed $984,000 to operating cash flow.
Cash used in investing activities for the three months ended March 31, 2011 was $344,000, primarily representing capital improvements to our Columbus and Cincinnati, Ohio facilities. As disclosed in the 2010 Annual Report to Shareholders on Form 10-K, the Company expects to add additional capacity to its Matamoros, Mexico facility to meet demand in 2012 and beyond. Given these capacity needs management plans to invest approximately $14,000,000 for this capacity expansion, of which approximately $11,000,000 is planned to be spent in 2011. To finance this capacity expansion, the Company has received a bank financing commitment in the second quarter of 2011 for increased borrowings. Total planned capital expenditures for the remainder of 2011, including the $11,000,000 noted above, are approximately $13,000,000.
Financing activities decreased cash by $2,253,000. This decrease was primarily the result of repayments of principal on the Company’s Mexican loan, capex loan, term loan and industrial revenue bond.
At March 31, 2011, the Company had cash on hand of $378,000 and line of credit availability of $8,000,000, with a scheduled maturity of April 30, 2012. At March 31, 2011, Core Molding Technologies had no outstanding borrowings on the line of credit.
The Company is required to meet certain financial covenants included in the Credit Agreement with respect to leverage ratios, fixed charge ratios, capital expenditures as well as other customary affirmative and negative covenants. As of March 31, 2011, the Company was in compliance with its financial covenants.

 

17


Table of Contents

Management regularly evaluates the Company’s ability to effectively meet its debt covenants based on the Company’s forecasts. Based on the Company’s forecasts which are primarily based on industry analysts’ estimates of heavy and medium-duty truck production volumes, as well as other assumptions and considering the additional financing commitment noted above, management believes that the Company will be able to maintain compliance with its financial covenants for the next 12 months. Management believes that cash flow from operating activities, available borrowings under the Credit Agreement and the additional financing commitment obtained in the second quarter of 2011 will be sufficient to meet the Company’s liquidity needs. If a material adverse change in the financial position of Core Molding Technologies should occur, or if actual sales or expenses are substantially different than what has been forecasted, Core Molding Technologies’ liquidity and ability to obtain further financing to fund future operating and capital requirements could be negatively impacted.
Critical Accounting Policies and Estimates
Management’s Discussion and Analysis of Financial Condition and Results of Operations discuss the Company’s consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States. The preparation of these consolidated financial statements requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and the disclosure of contingent assets and liabilities at the date of the consolidated financial statements and the reported amounts of revenues and expenses during the reporting period. On an on-going basis, management evaluates its estimates and judgments, including those related to accounts receivable, inventories, post retirement benefits, and income taxes. Management bases its estimates and judgments on historical experience and on various other factors that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying value of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions.
Management believes the following critical accounting policies, among others, affect its more significant judgments and estimates used in the preparation of its consolidated financial statements.
Accounts receivable allowances: Management maintains allowances for doubtful accounts for estimated losses resulting from the inability of its customers to make required payments. If the financial condition of the Company’s customers were to deteriorate, resulting in an impairment of their ability to make payments, additional allowances may be required. The Company recorded an allowance for doubtful accounts of $133,000 at March 31, 2011 and $118,000 at December 31, 2010. Management also records estimates for customer returns and deductions, discounts offered to customers, and for price adjustments. Should customer returns and deductions, discounts, and price adjustments fluctuate from the estimated amounts, additional allowances may be required. The Company has reduced accounts receivable for chargebacks by $718,000 at March 31, 2011 and $695,000 at December 31, 2010.
Inventories: Inventories, which include material, labor and manufacturing overhead, are valued at the lower of cost or market. The inventories are accounted for using the first-in, first-out (FIFO) method of determining inventory costs. Inventory quantities on-hand are regularly reviewed, and where necessary, provisions for excess and obsolete inventory are recorded based on historical and anticipated usage.
Goodwill and Long-Lived Assets: Management evaluates whether impairment exists for goodwill and long-lived assets annually on December 31 or at interim periods if an indicator of impairment exists. Should actual results differ from the assumptions used to determine impairment, additional provisions may be required. If there is a sustained downturn in the economy or the disruption of the financial and credit markets continues, demand for our products could fall below our current expectations and our forecasts of revenues and operating results could decline. Impairment charges of our goodwill or long-lived assets may be required in the future if our expected future cash flows decline. The Company has not recorded any impairment to goodwill or long-lived assets for the three months ended March 31, 2011.
Self-Insurance: The Company is self-insured with respect to most of its Columbus and Batavia, Ohio and Gaffney, South Carolina medical and dental claims and Columbus and Batavia, Ohio workers’ compensation claims. The Company has recorded an estimated liability for self-insured medical and dental claims incurred but not reported and worker’s compensation claims incurred but not reported at March 31, 2011 and December 31, 2010 of $991,000 and $1,041,000, respectively.

 

18


Table of Contents

Post retirement benefits: Management records an accrual for post retirement costs associated with the health care plan sponsored by Core Molding Technologies. Should actual results differ from the assumptions used to determine the reserves, additional provisions may be required. In particular, increases in future healthcare costs above the assumptions could have an adverse effect on Core Molding Technologies’ operations. The effect of a change in healthcare costs is described in Note 10 of the Notes to Consolidated Financial Statements, which are contained in the 2010 Annual Report to Shareholders. As further described in Note 5, in August 2010, the Company eliminated its post retirement health and life insurance benefits for all current and future represented employees who had not retired as of August 7, 2010. The elimination of benefits resulted in a reduction of the Company’s post retirement benefits liability of $10,282,000. Core Molding Technologies had a liability for post retirement healthcare benefits based on actuarially computed estimates of $10,860,000 at March 31, 2011 and $10,837,000 at December 31, 2010.
Revenue Recognition: Revenue from product sales is recognized at the time products are shipped and title transfers. Allowances for returned products and other credits are estimated and recorded as revenue is recognized. Tooling revenue is recognized when the customer approves the tool and accepts ownership. Progress billings and expenses are shown net as an asset or liability on the Company’s Consolidated Balance Sheet. Tooling in progress can fluctuate significantly from period to period and is dependent upon the stage of tooling projects and the related billing and expense payment timetable for individual projects and therefore does not necessarily reflect projected income or loss from tooling projects. At March 31, 2011 the Company had a net liability related to tooling in progress of $250,000, which represents approximately $3,294,000 of progress tooling billings and $3,044,000 of progress tooling expenses. At December 31, 2010 the Company had a net liability related to tooling in progress of $320,000, which represents approximately $2,697,000 of progress tooling billings and $2,377,000 of progress tooling expenses.
Income taxes: The Consolidated Balance Sheets at March 31, 2011 and December 31, 2010, include a deferred tax asset of $3,910,000. The Company performs analyses to evaluate the balance of deferred tax assets that will be realized. Such analyses are based on the premise that the Company is, and will continue to be, a going concern and that it is more likely than not that deferred tax benefits will be realized through the generation of future taxable income. For more information, refer to Note 9 in Core Molding Technologies 2010 Annual Report to Shareholders.

 

19


Table of Contents

Part I — Financial Information
Item 3.  
Quantitative and Qualitative Disclosures About Market Risk
Core Molding Technologies’ primary market risk results from changes in the price of commodities used in its manufacturing operations. Core Molding Technologies is also exposed to fluctuations in interest rates and foreign currency fluctuations associated with the Mexican Peso. Core Molding Technologies does not hold any material market risk sensitive instruments for trading purposes.
Core Molding Technologies has the following five items that are sensitive to market risks: (1) Industrial Revenue Bond (“IRB”) with a variable interest rate (although the Company has an interest rate swap to fix the interest rate at 4.89%); (2) Revolving Line of Credit and Mexican loan payable under the Credit Agreement, each of which bears a variable interest rate; (3) Capex loan payable with a variable interest rate (although the Company has an interest rate swap to fix the variable portion of the applicable interest rate at 2.3%); (4) foreign currency purchases in which the Company purchases Mexican pesos with United States dollars to meet certain obligations that arise due to operations at the facility located in Mexico; and (5) raw material purchases in which Core Molding Technologies purchases various resins and fiberglass for use in production. The prices and availability of these materials are affected by the prices of crude oil and natural gas as well as processing capacity versus demand.
Assuming a hypothetical 10% increase in commodity prices, Core Molding Technologies would be impacted by an increase in raw material costs, which would have an adverse effect on operating margins.
Assuming a hypothetical 10% change in short-term interest rates, interest paid on the Company’s Line of Credit and the Mexican loan would have been impacted in 2011 and 2010. The interest rate on these loans is based upon LIBOR. Although a 10% change in short-term interest rates would impact the interest paid by the Company, it would not have a material effect on earnings before tax.
A 10% change in future interest rate curves would significantly impact the fair value of the Company’s interest rate swaps.

 

20


Table of Contents

Part I — Financial Information
Item 4T.  
Controls and Procedures
As of the end of the period covered by this report, the Company has carried out an evaluation, under the supervision and with the participation of its management, including its Chief Executive Officer and its Chief Financial Officer, of the effectiveness of the design and operation of its disclosure controls and procedures (as defined in Rule 13a-15(e) of the Exchange Act). Based upon this evaluation, the Company’s management, including its Chief Executive Officer and its Chief Financial Officer, concluded that the Company’s disclosure controls and procedures were (i) effective to ensure that information required to be disclosed in the Company’s reports filed or submitted under the Exchange Act was accumulated and communicated to the Company’s management, including its Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure, and (ii) effective to ensure that information required to be disclosed in the Company’s reports filed or submitted under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the Securities and Exchange Commission’s rules and forms.
There were no changes in internal control over financial reporting (as such term is defined in Exchange Act Rule 13a-15(f)) that occurred in the last fiscal quarter that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

 

21


Table of Contents

Part II — Other Information
Item 1.  
Legal Proceedings
None
Item 1A.  
Risk Factors
There have been no material changes in Core Molding Technologies’ risk factors from those previously disclosed in Core Molding Technologies 2010 Annual Report on Form 10-K.
Item 2.  
Unregistered Sales of Equity Securities and Use of Proceeds
None
Item 3.  
Defaults Upon Senior Securities
None
Item 4.  
(Removed and Reserved)
Item 5.  
Other Information
None
Item 6.  
Exhibits
See Index to Exhibits

 

22


Table of Contents

SIGNATURES
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.
         
  CORE MOLDING TECHNOLOGIES, INC.
 
 
Date: May 13, 2011  By:   /s/ Kevin L. Barnett    
    Kevin L. Barnett   
    President, Chief Executive Officer, and Director   
     
Date: May 13, 2011  By:   /s/ Herman F. Dick, Jr.    
    Herman F. Dick, Jr.   
    Vice President, Secretary, Treasurer and Chief Financial Officer   

 

23


Table of Contents

INDEX TO EXHIBITS
             
Exhibit No.   Description   Location
       
 
   
  2 (a)(1)  
Asset Purchase Agreement Dated as of September 12, 1996, As amended October 31, 1996, between Navistar and RYMAC Mortgage Investment Corporation1
  Incorporated by reference to Exhibit 2-A to Registration Statement on Form S-4 (Registration No. 333-15809)
       
 
   
  2 (a)(2)  
Second Amendment to Asset Purchase Agreement dated December 16, 19961
  Incorporated by reference to Exhibit 2(a)(2) to Annual Report on Form 10-K for the year-ended December 31, 2001
       
 
   
  2 (b)(1)  
Agreement and Plan of Merger dated as of November 1, 1996, between Core Molding Technologies, Inc. and RYMAC Mortgage Investment Corporation
  Incorporated by reference to Exhibit 2-B to Registration Statement on Form S-4 (Registration No. 333-15809)
       
 
   
  2 (b)(2)  
First Amendment to Agreement and Plan of Merger dated as of December 27, 1996 Between Core Molding Technologies, Inc. and RYMAC Mortgage Investment Corporation
  Incorporated by reference to Exhibit 2(b)(2) to Annual Report on Form 10-K for the year ended December 31, 2002
       
 
   
  2 (c)  
Asset Purchase Agreement dated as of October 10, 2001, between Core Molding Technologies, Inc. and Airshield Corporation
  Incorporated by reference to Exhibit 1 to Form 8-K filed October 31, 2001
       
 
   
  3 (a)(1)  
Certificate of Incorporation of Core Molding Technologies, Inc. as filed with the Secretary of State of Delaware on October 8, 1996
  Incorporated by reference to Exhibit 4(a) to Registration Statement on Form S-8 (Registration No. 333-29203)
       
 
   
  3 (a)(2)  
Certificate of Amendment of Certificate of Incorporation of Core Molding Technologies, Inc. as filed with the Secretary of State of Delaware on November 6, 1996
  Incorporated by reference to Exhibit 4(b) to Registration Statement on Form S-8 (Registration No. 333-29203)
       
 
   
  3 (a)(3)  
Certificate of Amendment of Certificate of Incorporation as filed with the Secretary of State of Delaware on August 28, 2002
  Incorporated by reference to Exhibit 3(a)(4) to Quarterly Report on Form 10-Q for the quarter ended September 30, 2002
       
 
   
  3 (a)(4)  
Certificate of Designation, Preferences and Rights of Series A Junior Participating Preferred Stock as filed with the Secretary of State of Delaware on July 18, 2007
  Incorporated by reference to Exhibit 3.1 to Form 8-k filed July 19, 2007
       
 
   
  3 (b)  
Amended and Restated By-Laws of Core Molding Technologies, Inc.
  Incorporated by reference to Exhibit 3.1 to Current Report on Form 8-K filed January 4, 2008

 

24


Table of Contents

             
Exhibit No.   Description   Location
       
 
   
  4 (a)(1)  
Certificate of Incorporation of Core Molding Technologies, Inc. as filed with the Secretary of State of Delaware on October 8, 1996
  Incorporated by reference to Exhibit 4(a) to Registration Statement on Form S-8 (Registration No. 333-29203)
       
 
   
  4 (a)(2)  
Certificate of Amendment of Certificate of Incorporation of Core Materials Corporation as filed with the Secretary of State of Delaware on November 6, 1996
  Incorporated by reference to Exhibit 4(b) to Registration Statement on Form S-8 (Registration No. 333-29203)
       
 
   
  4 (a)(3)  
Certificate of Amendment of Certificate of Incorporation as filed with the Secretary of State of Delaware on August 28, 2002
  Incorporated by reference to Exhibit 3(a)(4) to Quarterly Report on Form 10-Q for the quarter ended September 30, 2002
       
 
   
  4 (a)(4)  
Certificate of Designation, Preferences and Rights of Series A Junior Participating Preferred Stock as filed with the Secretary of State of Delaware on July 18, 2007
  Incorporated by reference to Exhibit 3.1 to Form 8-K filed July 19, 2007
       
 
   
  4 (b)  
Stockholder Rights Agreement dated as of July 18, 2007, between Core Molding Technologies, Inc. and American Stock Transfer & Trust Company
  Incorporated by reference to Exhibit 4.1 to Current Report From 8-k filed July 19, 2007
       
 
   
  11    
Computation of Net Income per Share
  Exhibit 11 omitted because the required information is Included in Notes to Financial Statement
       
 
   
  31 (a)  
Section 302 Certification by Kevin L. Barnett, President, Chief Executive Officer, and Director
  Filed Herein
       
 
   
  31 (b)  
Section 302 Certification by Herman F. Dick, Jr., Vice President, Secretary, Treasurer, and Chief Financial Officer
  Filed Herein
       
 
   
  32 (a)  
Certification of Kevin L. Barnett, Chief Executive Officer of Core Molding Technologies, Inc., dated May 13, 2011, pursuant to 18 U.S.C. Section 1350
  Filed Herein
       
 
   
  32 (b)  
Certification of Herman F. Dick, Jr., Chief Financial Officer of Core Molding Technologies, Inc., dated May 13, 2011, pursuant to 18 U.S.C. Section 1350
  Filed Herein
     
1  
The Asset Purchase Agreement, as filed with the Securities and Exchange Commission at Exhibit 2-A to Registration Statement on Form S-4 (Registration No. 333-15809), omits the exhibits (including, the Buyer Note, Special Warranty Deed, Supply Agreement, Registration Rights Agreement and Transition Services Agreement, identified in the Asset Purchase Agreement) and schedules (including, those identified in Sections 1, 3, 4, 5, 6, 8 and 30 of the Asset Purchase Agreement. Core Molding Technologies, Inc. will provide any omitted exhibit or schedule to the Securities and Exchange Commission upon request.

 

25