cpst_Current Folio_10Q

Table of Contents

 

 

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 


 

Form 10-Q

 


 

(Mark One)

 

QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

For the quarterly period ended December 31, 2018

 

or

 

TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

For the transition period from          to         

 

Commission File Number: 001-15957

 


 

Capstone Turbine Corporation

(Exact name of registrant as specified in its charter)

 

Delaware

 

95-4180883

(State or other jurisdiction of
incorporation or organization)

 

(I.R.S. Employer
Identification No.)

 

 

 

16640 Stagg Street
Van Nuys, California
(Address of principal executive offices)

 

91406
(Zip Code)

 

818-734-5300

(Registrant’s telephone number, including area code)

 


 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒   No ☐

 

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒  No ☐

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

 

 

 

 

Large accelerated filer ☐

 

Accelerated filer ☐

Non‑accelerated filer ☒

 

Smaller reporting company ☒

 

 

Emerging growth company ☐

 

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act ☐

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes  ☐   No ☒

 

The number of shares outstanding of the registrant’s common stock as of January 31, 2019 was 71,593,270.

 

 

 


 

Table of Contents

CAPSTONE TURBINE CORPORATION

INDEX

 

 

    

 

    

Page
Number

PART I — FINANCIAL INFORMATION 

 

 

 

 

 

 

 

Item 1. 

 

Financial Statements (Unaudited)

 

3

 

 

 

 

 

 

 

Condensed Consolidated Balance Sheets as of December 31, 2018 and March 31, 2018

 

3

 

 

 

 

 

 

 

Condensed Consolidated Statements of Operations for the Three and Nine Months Ended December 31, 2018 and 2017

 

4

 

 

 

 

 

 

 

Condensed Consolidated Statements of Cash Flows for the Nine Months Ended December 31, 2018 and 2017

 

5

 

 

 

 

 

 

 

Notes to Condensed Consolidated Financial Statements

 

6

 

 

 

 

 

Item 2. 

 

Management’s Discussion and Analysis of Financial Condition and Results of Operations

 

28

 

 

 

 

 

Item 3. 

 

Quantitative and Qualitative Disclosures About Market Risk

 

46

 

 

 

 

 

Item 4. 

 

Controls and Procedures

 

46

 

 

 

 

 

PART II — OTHER INFORMATION 

 

 

 

 

 

 

 

Item 1. 

 

Legal Proceedings

 

47

 

 

 

 

 

Item 1A. 

 

Risk Factors

 

50

 

 

 

 

 

Item 2. 

 

Unregistered Sales of Equity Securities and Use of Proceeds

 

53

 

 

 

 

 

Item 3. 

 

Defaults Upon Senior Securities

 

54

 

 

 

 

 

Item 4. 

 

Mine Safety Disclosures

 

54

 

 

 

 

 

Item 5. 

 

Other Information

 

54

 

 

 

 

 

Item 6. 

 

Exhibits

 

55

 

 

 

 

 

Signatures 

 

57

 

 

2


 

Table of Contents

PART I — FINANCIAL INFORMATION

Item 1.  Financial Statements

 

CAPSTONE TURBINE CORPORATION AND SUBSIDIARIES

CONDENSED CONSOLIDATED BALANCE SHEETS

(In thousands, except share amounts)

(Unaudited)

 

 

 

 

 

 

 

 

 

 

 

 

December 31,

    

March 31,

 

 

    

2018

    

2018

 

Assets

 

 

 

 

 

 

 

Current Assets:

 

 

 

 

 

 

 

Cash and cash equivalents

 

$

10,681

 

$

14,408

 

Restricted cash

 

 

6,000

 

 

5,000

 

Accounts receivable, net of allowances of $5,356 at December 31, 2018 and $5,744 at March 31, 2018

 

 

13,225

 

 

15,968

 

Inventories, net

 

 

18,375

 

 

15,633

 

Prepaid expenses and other current assets

 

 

3,905

 

 

2,803

 

Total current assets

 

 

52,186

 

 

53,812

 

Property, plant, equipment and rental assets, net

 

 

5,150

 

 

2,859

 

Non-current portion of inventories

 

 

1,083

 

 

1,041

 

Intangible assets, net

 

 

243

 

 

411

 

Other assets

 

 

3,077

 

 

250

 

Total assets

 

$

61,739

 

$

58,373

 

Liabilities and Stockholders’ Equity

 

 

 

 

 

 

 

Current Liabilities:

 

 

 

 

 

 

 

Accounts payable and accrued expenses

 

$

15,686

 

$

13,503

 

Accrued salaries and wages

 

 

1,357

 

 

1,588

 

Accrued warranty reserve

 

 

2,569

 

 

1,682

 

Deferred revenue

 

 

4,749

 

 

6,596

 

Revolving credit facility

 

 

10,736

 

 

8,527

 

Current portion of notes payable and capital lease obligations

 

 

190

 

 

192

 

Total current liabilities

 

 

35,287

 

 

32,088

 

Deferred revenue - non-current

 

 

1,163

 

 

 —

 

Long-term portion of notes payable and capital lease obligations

 

 

246

 

 

130

 

Other long-term liabilities

 

 

369

 

 

396

 

Total liabilities

 

 

37,065

 

 

32,614

 

Commitments and contingencies (Note 15)

 

 

 

 

 

 

 

Stockholders’ Equity:

 

 

 

 

 

 

 

Preferred stock, $.001 par value; 10,000,000 shares authorized; none issued

 

 

 —

 

 

 —

 

Common stock, $.001 par value; 515,000,000 shares authorized, 71,803,478 shares issued and 71,593,269 shares outstanding at December 31, 2018; 57,062,598 shares issued and 56,916,646 shares outstanding at March 31, 2018

 

 

72

 

 

57

 

Additional paid-in capital

 

 

901,261

 

 

889,585

 

Accumulated deficit

 

 

(874,928)

 

 

(862,225)

 

Treasury stock, at cost; 210,209 shares at December 31, 2018 and 145,952 shares at March 31, 2018

 

 

(1,731)

 

 

(1,658)

 

Total stockholders’ equity

 

 

24,674

 

 

25,759

 

Total liabilities and stockholders' equity

 

$

61,739

 

$

58,373

 

 

See accompanying notes to condensed consolidated financial statements.

3


 

Table of Contents

CAPSTONE TURBINE CORPORATION AND SUBSIDIARIES

CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS

(In thousands, except per share data)
(Unaudited)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Three Months Ended

 

Nine Months Ended

 

 

 

December 31,

 

December 31,

 

 

    

2018

    

2017

    

2018

    

2017

 

Revenue:

 

 

 

    

 

 

 

 

 

    

 

 

 

Product, accessories and parts

 

$

13,310

 

$

18,876

 

$

49,022

 

$

50,373

 

Service

 

 

4,720

 

 

3,885

 

 

12,371

 

 

11,403

 

Total revenue

 

 

18,030

 

 

22,761

 

 

61,393

 

 

61,776

 

Cost of goods sold:

 

 

 

 

 

 

 

 

 

 

 

 

 

Product, accessories and parts

 

 

12,534

 

 

15,471

 

 

45,109

 

 

43,059

 

Service

 

 

3,256

 

 

2,333

 

 

10,185

 

 

8,505

 

Total cost of goods sold

 

 

15,790

 

 

17,804

 

 

55,294

 

 

51,564

 

Gross margin

 

 

2,240

 

 

4,957

 

 

6,099

 

 

10,212

 

Operating expenses:

 

 

 

 

 

 

 

 

 

 

 

 

 

Research and development

 

 

891

 

 

957

 

 

2,713

 

 

3,244

 

Selling, general and administrative

 

 

4,574

 

 

4,057

 

 

15,535

 

 

13,815

 

Total operating expenses

 

 

5,465

 

 

5,014

 

 

18,248

 

 

17,059

 

Loss from operations

 

 

(3,225)

 

 

(57)

 

 

(12,149)

 

 

(6,847)

 

Other expense

 

 

(23)

 

 

(12)

 

 

(44)

 

 

(8)

 

Interest income

 

 

 —

 

 

 —

 

 

 —

 

 

 9

 

Interest expense

 

 

(202)

 

 

(170)

 

 

(506)

 

 

(489)

 

Change in warrant valuation

 

 

 —

 

 

(84)

 

 

 —

 

 

(741)

 

Loss before provision for income taxes

 

 

(3,450)

 

 

(323)

 

 

(12,699)

 

 

(8,076)

 

Provision for income taxes

 

 

 —

 

 

 —

 

 

 5

 

 

 7

 

Net loss

 

$

(3,450)

 

$

(323)

 

$

(12,704)

 

$

(8,083)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Net loss per common share—basic and diluted

 

$

(0.05)

 

$

(0.01)

 

$

(0.19)

 

$

(0.18)

 

Weighted average shares used to calculate basic and diluted net loss per common share

 

 

69,542

 

 

46,760

 

 

65,469

 

 

45,465

 

 

See accompanying notes to condensed consolidated financial statements.

 

4


 

Table of Contents

CAPSTONE TURBINE CORPORATION AND SUBSIDIARIES

CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS

(In thousands)

(Unaudited)

 

 

 

 

 

 

 

 

 

 

 

 

Nine Months Ended

 

 

 

December 31,

 

 

    

2018

    

2017

 

Cash Flows from Operating Activities:

 

 

 

 

 

 

 

Net loss

 

$

(12,704)

 

$

(8,083)

 

Adjustments to reconcile net loss to net cash used in operating activities:

 

 

 

 

 

 

 

Depreciation and amortization

 

 

957

 

 

854

 

Amortization of deferred financing costs

 

 

132

 

 

168

 

Accounts receivable allowances

 

 

(345)

 

 

(771)

 

Inventory provision

 

 

617

 

 

1,027

 

Provision for warranty expenses

 

 

1,921

 

 

610

 

Loss on disposal of equipment

 

 

 7

 

 

25

 

Stock-based compensation

 

 

743

 

 

409

 

Change in warrant valuation

 

 

 —

 

 

741

 

Changes in operating assets and liabilities:

 

 

 

 

 

 

 

Accounts receivable

 

 

3,088

 

 

1,697

 

Inventories

 

 

(3,401)

 

 

(791)

 

Prepaid expenses, other current assets and other assets

 

 

(3,821)

 

 

(252)

 

Accounts payable and accrued expenses

 

 

2,185

 

 

(1,769)

 

Accrued salaries and wages and long term liabilities

 

 

(258)

 

 

(598)

 

Accrued warranty reserve

 

 

(1,034)

 

 

(2,616)

 

Deferred revenue

 

 

(684)

 

 

181

 

Net cash used in operating activities

 

 

(12,597)

 

 

(9,168)

 

Cash Flows from Investing Activities:

 

 

 

 

 

 

 

Expenditures for property, equipment and rental assets

 

 

(3,070)

 

 

(1,421)

 

Net cash used in investing activities

 

 

(3,070)

 

 

(1,421)

 

Cash Flows from Financing Activities:

 

 

 

 

 

 

 

Net proceeds from (repayments of) revolving credit facility

 

 

2,209

 

 

(567)

 

Repayment of notes payable and capital lease obligations

 

 

(144)

 

 

(298)

 

Cash used in employee stock-based transactions

 

 

(73)

 

 

(22)

 

Net proceeds from issuance of common stock and warrants

 

 

10,948

 

 

8,293

 

Net cash provided by financing activities

 

 

12,940

 

 

7,406

 

Net decrease in Cash, Cash Equivalents and Restricted Cash

 

 

(2,727)

 

 

(3,183)

 

Cash, Cash Equivalents and Restricted Cash, Beginning of Period

 

 

19,408

 

 

19,705

 

Cash, Cash Equivalents and Restricted Cash, End of Period

 

$

16,681

 

$

16,522

 

Supplemental Disclosures of Cash Flow Information:

 

 

 

 

 

 

 

Cash paid during the period for:

 

 

 

 

 

 

 

Interest

 

$

343

 

$

317

 

Income taxes

 

$

 5

 

$

 7

 

Supplemental Disclosures of Non-Cash Information:

 

 

 

 

 

 

 

Acquisition of property and equipment through accounts payable

 

$

 —

 

$

162

 

Renewal of insurance contracts which was financed by notes payable

 

$

260

 

$

422

 

 

See accompanying notes to condensed consolidated financial statements.

5


 

Table of Contents

CAPSTONE TURBINE CORPORATION AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

(Unaudited)

 

1.  Business and Organization

Capstone Turbine Corporation (the “Company”) develops, manufactures, markets and services microturbine technology solutions for use in stationary distributed power generation applications and distribution networks, including cogeneration (combined heat and power (“CHP”), integrated combined heat and power (“ICHP”), and combined cooling, heat and power (“CCHP”)), renewable energy, natural resources and critical power supply. In addition, the Company’s microturbines can be used as battery charging generators for hybrid electric vehicles and to provide power to a vessel’s electrical loads in marine applications. The Company’s microturbines can be interconnected to other distributed energy resources to form “microgrids” (also called “distribution networks”) located within a specific geographic area and provide power to a group of buildings. The Company also remanufactures microturbine engines and provides aftermarket parts and services. The Company was organized in 1988 and has been commercially producing its microturbine generators since 1998.

2.  Basis of Presentation

The accompanying unaudited condensed consolidated financial statements have been prepared in accordance with accounting principles generally accepted in the United States of America (“generally accepted accounting principles” or “GAAP”) for interim financial information and the instructions to Form 10-Q and Regulation S-X promulgated under the Securities Exchange Act of 1934, as amended (the “Exchange Act”). They do not include all of the information and footnotes required by generally accepted accounting principles for complete financial statements. The condensed consolidated balance sheet at March 31, 2018 was derived from audited consolidated financial statements included in the Company’s Annual Report on Form 10-K for the year ended March 31, 2018. In the opinion of management, the interim condensed consolidated financial statements include all adjustments (including normal recurring adjustments) necessary for a fair presentation of the financial condition, results of operations and cash flows for such periods. Results of operations for any interim period are not necessarily indicative of results for any other interim period or for the full year. These condensed consolidated financial statements should be read in conjunction with the consolidated financial statements and notes thereto included in the Company’s Annual Report on Form 10-K for the Fiscal Year 2018. This Quarterly Report on Form 10-Q (this “Form 10-Q”) refers to the Company’s fiscal years ending March 31 as its “Fiscal” years.

Significant Accounting Policies  Except for the accounting policy for revenue recognition that was updated as a result of adopting Accounting Standards Update (“ASU”) No. 2014-09 (defined below) there have been no changes to the Company’s significant accounting policies described in the Annual Report on Form 10-K for the Fiscal Year 2018 filed with the SEC on June 7, 2018, that have had a material impact on the Company's condensed consolidated financial statements and related notes. See Note 13—Revenue Recognition for additional discussion of the impact of the adoption of ASU 2014-09.

Cash, Cash Equivalents and Restricted Cash The Company considers only those investments that are highly liquid and readily convertible to cash with original maturities of three months or less at date of purchase as cash equivalents. The Company maintains its cash and cash equivalents in highly rated financial institutions, and at times these balances exceed insurable amounts. Restricted cash represents the Company’s cash held by Western Alliance Bank through its Bridge Bank division (“Bridge Bank”) and as a condition of the two secured credit facilities (the “Bridge Bank Credit Agreements”) with Bridge Bank, the Company has restricted $6.0 million of cash equivalents as additional security for the credit facility. The following table provides a reconciliation of cash, cash equivalents and restricted cash reported within the condensed consolidated balance sheets that sum to the total of the same amounts shown in the statements of cash flows.

 

 

 

 

 

 

 

 

 

 

December 31,

 

March 31,

 

 

    

2018

    

2018

 

Cash and cash equivalents

 

$

10,681

 

$

14,408

 

Restricted cash

 

 

6,000

 

 

5,000

 

Total cash, cash equivalents and restricted cash

 

$

16,681

 

$

19,408

 

 

6


 

Table of Contents

Evaluation of Ability to Maintain Current Level of Operations  In connection with preparing the condensed consolidated financial statements for the third quarter of Fiscal 2019, management evaluated whether there were conditions and events, considered in the aggregate, that raised substantial doubt about the Company’s ability to meet its obligations as they became due for the next twelve months from the date of issuance of its third quarter of Fiscal 2019 interim condensed consolidated financial statements. Management assessed that there were such conditions and events, including a history of recurring operating losses, negative cash flows from operating activities, the continued impact of the volatility of the global oil and gas markets, a strong U.S. dollar in certain markets making its products more expensive in such markets and ongoing global geopolitical tensions. The Company incurred a net loss of $3.5 million and used cash in operating activities of $2,000 for the third quarter of Fiscal 2019. The Company’s working capital requirements during the third quarter of Fiscal 2019 were in line with management’s expectations, which included cash received from Turbine International of approximately $0.4 million and the deployment of approximately 3.6 megawatts of its C1000 Signature Series systems under its factory rental program. The Company’s net loss expanded during the third quarter of Fiscal 2019 primarily because of lower revenue from microturbine products and higher warranty expense. As of December 31, 2018, the Company had cash, cash equivalents and restricted cash of $16.7 million, and outstanding borrowings under its credit facility of $10.7 million.

Management evaluated these conditions in relation to the Company’s ability to meet its obligations as they become due. The Company’s ability to continue current operations and to execute on management’s plans is dependent on its ability to generate cash flows from operations. Management believes that the Company will continue to make progress on its path to profitability by continuing to maintain low operating expenses and develop its geographical and vertical markets.  The Company may seek to raise funds by selling additional securities (through at-the-market offerings or otherwise) or by obtaining additional debt financing. There is no assurance that the Company will be able to obtain additional funds on commercially favorable terms or at all. If the Company raises additional funds by issuing additional equity or convertible debt securities, the fully diluted ownership percentages of existing stockholders will be reduced. In addition, any equity or debt securities that the Company would issue may have rights, preferences or privileges senior to those of the holders of its common stock. The Company entered into a note purchase agreement on February 4, 2019 in which it sold senior secured notes of the Company in a private placement. See Note 17— Subsequent Events for discussion with respect to this note purchase agreement.

Based on the Company’s current operating plan, management anticipates that, given current working capital levels, current financial projections and funds received under note purchase agreement, the Company will be able to meet its financial obligations as they become due over the next twelve months from the date of issuance of its third quarter of Fiscal 2019 condensed consolidated financial statements.

Basis for Consolidation  The condensed consolidated financial statements include the accounts of the Company, Capstone Turbine International, Inc., its wholly owned subsidiary that was formed in June 2004 and Capstone Turbine Financial Services, LLC, its wholly owned subsidiary that was formed in October 2015, after elimination of inter-company transactions.

3.  Recently Issued Accounting Standards

 

Adopted

In May 2014, the Financial Accounting Standards Board (“FASB”) issued ASU, 2014-09, Revenue from Contracts with Customers (Topic 606), (“ASU 2014-09”). ASU 2014-09 outlines a single, comprehensive model for accounting for revenue from contracts with customers and requires more detailed disclosure to enable users of financial statements to understand the nature, amount, timing and uncertainty of revenue and cash flows arising from such contracts. ASU 2014-09 provides a five-step analysis of transactions to determine when and how revenue is recognized. The core principle is that a company should recognize revenue to depict the transfer of promised goods or services to customers in an amount that reflects the consideration to which the entity expects to be entitled in exchange for those goods and services. On April 1, 2018, the Company adopted ASU 2014-09 under the modified retrospective transition method. This method was applied to contracts that were not complete as of the date of initial application of ASU 2014-09.

During the three and nine months ended December 31, 2018, the Company recognized revenue based on ASU 2014-09, however revenue for the three and nine months ended December 31, 2017 was recognized based on

7


 

Table of Contents

Accounting Standards Codification, Topic 605, Revenue Recognition. See Note 13—Revenue Recognition for additional discussion of the impact of the adoption of ASU 2014-09.

On December 22, 2017, the SEC issued guidance under Staff Accounting Bulletin No. 118, Income Tax Accounting Implications of the Tax Cuts and Jobs Act (“SAB 118”) directing taxpayers to consider the impact of the U.S. legislation as “provisional” when it does not have the necessary information available, prepared or analyzed (including computations) in reasonable detail to complete its accounting for the change in tax law. As of December 31, 2018, upon completing its analysis, the Company believes that the amount booked as provisional in its financial statements as of March 31, 2018 under SAB 118 is final.

Not yet adopted

On August 17, 2018, the SEC issued Release No. 33-10532, “Disclosure Update and Simplification”, (“Release No. 33-10532”) which amends certain redundant, duplicative, outdated, superseded or overlapping disclosure requirements. The amendments in this rule are intended to facilitate the disclosure of information to investors and to simplify compliance without significantly impacting the mix of information provided to investors. The amendments also expand the disclosure requirements regarding the analysis of stockholders’ equity for interim financial statements, in which entities will be required to present a reconciliation for each period for which a statement of comprehensive income is required to be filed. The final rule became effective on November 5, 2018, however the SEC announced that it would not object if a filer’s first presentation of the changes in stockholders’ equity were included in its Form 10-Q for the quarter that begins after the effective date of the amendments. The Company is currently evaluating the impact of Release No. 33-10532 on its consolidated financial position and results of operations.

On June 2018, the FASB issued ASU 2018-07, “Shared-Based Payment Arrangements with Nonemployees” (Topic 505), (“ASU 2018-07”). ASU 2018-07 simplifies the accounting for share-based payments granted to nonemployees for goods and services. Under ASU 2018-07, most of the guidance on such payments to nonemployees will be aligned with the requirements for share-based payments granted to employees. Under the ASU 2018-07, the measurement of equity-classified nonemployee share-based payments will be fixed on the grant date, as defined in ASC 718, and will use the term nonemployee vesting period, rather than requisite service period. The amendments in this update are effective for fiscal years beginning after December 15, 2018, including interim periods within those fiscal years. Early adoption is permitted if financial statements have not yet been issued. The Company is currently evaluating the impact of ASU 2018-07 on its consolidated financial position and results of operations.

In February 2016, the FASB issued ASU 2016-02, Leases (Topic 842), (“ASU 2016-02”). The purpose of ASU 2016-02 is to provide financial statement users a better understanding of the amount, timing, and uncertainty of cash flows arising from leases. The adoption of ASU 2016-02 will result in the recognition of a right-of-use asset and a lease liability for most operating leases. New disclosure requirements include qualitative and quantitative information about the amounts recorded in the financial statements. In September 2017, the FASB issued ASU 2017-13, Revenue Recognition (Topic 605), Revenue from Contracts with Customers (Topic 606), Leases (Topic 840), and Leases (Topic 842), which provides additional implementation guidance on the previously issued ASU 2016-02 Leases (Topic 842). ASU 2016-02 requires a lessee to recognize assets and liabilities on the balance sheet for leases with lease terms greater than 12 months. ASU 2016-02 is effective for fiscal years beginning after December 15, 2018. ASU 2016-02 requires a modified retrospective transition by means of a cumulative-effect adjustment to retained earnings as of the beginning of the fiscal year in which the guidance is effective with the option to elect certain practical expedients. Early adoption is permitted. The Company is currently evaluating the impact of ASU 2016-02 on its consolidated financial position and results of operations.

4.  Customer Concentrations and Accounts Receivable

 

Sales to E-Finity Distributed Generation, LLC (“E-Finity”) and Cal Microturbine (“CAL”), two of the Company’s domestic distributors and DTC Soluciones Inmobiliarias S.A. de C.V., one of the Company’s Mexican distributors (“DTC”), accounted for 14%, 13% and 13%, respectively, of revenue for the three months ended December 31, 2018. Sales to E-Finity and CAL accounted for 29% and 14%, respectively, of revenue for the three months ended December 31, 2017. For the nine months ended December 31, 2018, E-Finity accounted for 12% of revenue. For the nine months ended December 31, 2017, E-Finity and Horizon Power Systems (“Horizon”), one of the Company’s domestic distributors, accounted for 19% and 10% of revenue, respectively.

8


 

Table of Contents

Additionally, E-Finity, DTC and CAL accounted for 14%, 11% and 11%, respectively, of net accounts receivable as of December 31, 2018. Serba Dinamik Sdn Bhd (“Serba”), one of the Company’s Malaysian distributors, E-Finity, and Supernova Energy Services SAS (“Supernova”),  one of the Company’s Columbian distributors, accounted for 20%, 18% and 10%, respectively, of net accounts receivable as of March 31, 2018.

On October 13, 2017, the Company entered into an Accounts Receivable Assignment Agreement (the “Assignment Agreement”) and Promissory Note (the “Note”) with Turbine International, LLC (“TI”).  

Pursuant to the terms of the Assignment Agreement, the Company agreed to assign to TI the right, title and interest to receivables owed to the Company from BPC Engineering, its former Russian distributor (“BPC”), upon TI’s payment to the Company of $2.5 million in three payments by February 1, 2018. The Company received payments from TI of approximately $1.0 million under the Assignment Agreement during Fiscal 2018, which was recorded as bad debt recovery. The receivables owed to the Company from BPC had a balance of $4.8 million as of December 31, 2018, and this balance was fully reserved.

On October 13, 2017, the Company and Hispania Petroleum, S.A. (the “Guarantor”) entered into a Guaranty Agreement (the “Guaranty Agreement”) whereby the Guarantor guarantees TI’s obligations under the Agreement and Note. However, due to the Company’s limited business relationship with TI and the missed payments on the Assignment Agreement, the Company deferred recognition of the Assignment Agreement and Note until collectability is reasonably assured.   

In connection with the terms of the Note, the Company granted TI the sole distribution rights for its products and services in the Russian oil and gas sector. As a result of this appointment, TI agreed to pay the Company $3.8 million over a three-year period in 35 equal monthly installments starting in August 2018.

On June 5, 2018, the Company entered into an amendment to the Assignment Agreement (the “Amended Assignment Agreement”) and the Note (the “Amended Note”) with TI. Pursuant to the terms of the Amended Assignment Agreement, the right, title and interest to receivables owed to the Company from BPC will be contingent upon TI’s payment to the Company of the remaining approximately $1.5 million in five payments by September 20, 2019. The Company collected approximately $0.4 million and $0.5 million from TI during the three and nine months ended December 31, 2018, under the terms of the Amended Assignment Agreement. Under the terms of the Amended Note, TI agreed to pay the Company $3.8 million over a three-year period in 13 equal quarterly installments starting in December 20, 2019. As of December 31, 2018, the right, title and interest to the receivables owed to the Company from BPC had not been assigned to TI, as TI had not yet made all payments as required under the Assignment Agreement.

The Company recorded a net bad debt recovery of approximately $0.4 million and $0.3 million during the three and nine months ended December 31, 2018, respectively. The Company recorded a net bad debt recovery of approximately $0.7 million and $0.8 million during the three and nine months ended December 31, 2017, respectively. As of March 31, 2015, the Company had an amount owed of approximately $8.1 million by BPC. As of December 31, 2018, the Company collected cumulatively approximately $1.8 million from BPC on their accounts receivable, which has been previously reserved. The Company cumulatively collected approximately $1.5 million from TI, under the terms of the Assignment Agreement and the Amended Assignment Agreement. The remaining balance of the fully reserved accounts receivable was $4.8 million as of December 31, 2018.

9


 

Table of Contents

5.  Inventories

 

Inventories are valued at the lower of cost (determined on a first in first out (“FIFO”) basis) or net realizable value and consisted of the following as of December 31, 2018 and March 31, 2018 (in thousands):

 

 

 

 

 

 

 

 

 

 

 

December 31,

 

March 31,

 

 

    

2018

    

2018

 

Raw materials

 

$

21,888

 

$

17,981

 

Work in process

 

 

 2

 

 

111

 

Finished goods

 

 

1,426

 

 

4,076

 

Total

 

 

23,316

 

 

22,168

 

Less inventory reserve

 

 

(3,858)

 

 

(5,494)

 

Less non-current portion

 

 

(1,083)

 

 

(1,041)

 

Current portion

 

$

18,375

 

$

15,633

 

 

The non-current portion of inventories represents the portion of the inventories in excess of amounts expected to be sold or used in the next twelve months. The non-current inventories are primarily comprised of repair parts for older generation products that are still in operation but are not technologically compatible with current configurations. The weighted average age of the non-current portion of inventories on hand as of December 31, 2018 is 1.2 years. The Company expects to use the non-current portion of the inventories on hand as of December 31, 2018 over the periods presented in the following table (in thousands):

 

 

 

 

 

 

 

 

 

Non-current Inventory

 

 

 

 

Balance Expected

 

Expected Period of Use

    

 

to be Used

 

13 to 24 months

 

$

467

 

25 to 36 months

 

 

616

 

Total

 

$

1,083

 

 

6.  Property, Plant, Equipment and Rental Assets

 

Property, plant, equipment and rental assets consisted of the following as of December 31, 2018 and March 31, 2018 (in thousands):

 

 

 

 

 

 

 

 

 

 

December 31,

 

March 31,

 

 

    

2018

    

2018

 

Machinery, equipment, automobiles and furniture

 

$

15,274

 

$

15,302

 

Leasehold improvements

 

 

11,074

 

 

10,949

 

Molds and tooling

 

 

2,834

 

 

2,904

 

Rental assets

 

 

2,590

 

 

179

 

 

 

 

31,772

 

 

29,334

 

Less, accumulated depreciation

 

 

(26,622)

 

 

(26,475)

 

Total property, plant, equipment and rental assets, net

 

$

5,150

 

$

2,859

 

 

During the three months ended December 31, 2018, the Company deployed approximately $2.6 million of its C1000 Signature Series systems under its factory rental program.

The Company regularly reassesses the useful lives of property and equipment and retires assets no longer in service. Depreciation expense for property, equipment and rental assets was $0.3 million and $0.8 million for the three and nine months ended December 31, 2018, respectively. Depreciation expense for property and equipment was $0.2 million and $0.6 million for the three and nine months ended December 31, 2017, respectively.

 

 

 

10


 

Table of Contents

7.  Intangible Assets

 

Intangible assets consisted of the following as of December 31, 2018 and March 31, 2018 (in thousands):

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

December 31, 2018

 

 

 

Weighted

 

 

 

 

 

 

 

 

 

 

 

 

Average

 

Intangible

 

 

 

 

 

 

 

 

 

Amortization

 

Assets,

 

Accumulated

 

Intangible

 

 

 

Period

 

Gross

 

Amortization

 

Assets, Net

 

Manufacturing license

    

17 years

    

$

3,700

    

$

3,700

    

$

 —

 

Technology

 

10 years

 

 

2,240

 

 

1,997

 

 

243

 

Trade name & parts, service and TA100 customer relationships

 

1.2 to 5 years

 

 

1,766

 

 

1,766

 

 

 —

 

Total

 

 

 

$

7,706

 

$

7,463

 

$

243

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

March 31, 2018

 

 

 

Weighted

 

 

 

 

 

 

 

 

 

 

 

 

Average

 

Intangible

 

 

 

 

 

 

 

 

 

Amortization

 

Assets,

 

Accumulated

 

Intangible

 

 

 

Period

 

Gross

 

Amortization

 

Assets, Net

 

Manufacturing license

    

17 years

    

$

3,700

    

$

3,700

    

$

 —

 

Technology

 

10 years

 

 

2,240

 

 

1,829

 

 

411

 

Trade name & parts, service and TA100 customer relationships

 

1.2 to 5 years

 

 

1,766

 

 

1,766

 

 

 —

 

Total

 

 

 

$

7,706

 

$

7,295

 

$

411

 

 

Amortization expense for the intangible assets was $0.1 million and $0.2 million for each of the three and nine months ended December 31, 2018 and 2017, respectively.

 

Expected future amortization expense of intangible assets as of December 31, 2018 is as follows (in thousands):

 

 

 

 

 

 

 

 

Amortization

 

Year Ending March 31,

    

Expense

 

2019 (remainder of fiscal year)

 

 

56

 

2020

 

 

187

 

Total expected future amortization

 

$

243

 

 

The manufacturing license provides the Company with the ability to manufacture recuperator cores previously purchased from Solar Turbines Incorporated (“Solar”). The Company is required to pay a per-unit royalty fee over a seventeen-year period for cores manufactured and sold by the Company using the technology. Royalties of approximately $8,100 and $9,200 were earned by Solar for the three months ended December 31, 2018 and 2017, respectively. Royalties of approximately $25,200 and $22,900 were earned by Solar for the nine months ended December 31, 2018 and 2017, respectively. Earned royalties of approximately $18,100 and $8,000 were unpaid as of December 31, 2018 and March 31, 2018, respectively, and are included in accounts payable and accrued expenses in the accompanying condensed consolidated balance sheets.

 

8.  Stock-Based Compensation

The following table summarizes, by condensed consolidated statement of operations line item, stock-based compensation expense for the Company’s three and nine months ended December 31, 2018 and 2017 (in thousands):

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Three Months Ended

 

Nine Months Ended

 

 

 

December 31,

 

December 31,

 

 

    

2018

    

2017

    

2018

    

2017

 

Cost of goods sold

 

$

13

    

$

 —

 

$

38

    

$

38

 

Research and development

 

 

 8

 

 

 4

 

 

21

 

 

16

 

Selling, general and administrative

 

 

271

 

 

98

 

 

684

 

 

355

 

Stock-based compensation expense

 

$

292

 

$

102

 

$

743

 

$

409

 

 

11


 

Table of Contents

Stock Plans

 

2000 Equity Incentive Plan and 2017 Equity Incentive Plan

 

In June 2000, the Company adopted the 2000 Equity Incentive Plan (“2000 Plan”). The 2000 Plan provides for a total maximum aggregate number of shares which may be issued of 1,849,000 shares. In June 2017, the Company’s Board of Directors (the “Board”) adopted the Capstone Turbine Corporation 2017 Equity Incentive Plan (the “2017 Plan”) which was approved by the stockholders at the Company’s 2017 annual meeting of stockholders on August 31, 2017 (the “2017 Annual Meeting”). The 2017 Plan provides for awards of up to 3,000,000 shares of common stock. The 2017 Plan is administered by the Compensation Committee designated by the Board (the “Compensation Committee”). The Compensation Committee’s authority includes determining the number of incentive awards and vesting provisions. On June 5, 2018, the Company’s Board of Directors adopted an amendment of the 2017 Plan to increase the aggregate number of shares of common stock authorized for issuance under the 2017 Plan by 3,000,000 shares of common stock. The amendment of the 2017 Plan was approved by the Company’s stockholders at the 2018 annual meeting of stockholders on August 30, 2018.

 

Stock Options

 

The Company issued stock options under the 2000 Plan and issues stock options under the 2017 Plan to employees, non-employee directors and consultants that vest and become exercisable over a four-year period and expire 10 years after the grant date. The Company uses a Black-Scholes valuation model to estimate the fair value of the options at the grant date, and compensation cost is recorded on a straight-line basis over the vesting period. All options are subject to the following vesting provisions: one-fourth vest one year after the issuance date and 1/48th vest on the first day of each full month thereafter, so that all options will be vested on the first day of the 48th month after the grant date. Information relating to stock options for the Company’s nine months ended December 31, 2018 is as follows:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Weighted-

 

 

 

 

 

 

 

 

 

 

Average

 

 

 

 

 

 

 

Weighted-

 

Remaining

 

Aggregate

 

 

 

 

 

Average

 

Contractual

 

Intrinsic

 

 

 

Shares

 

Exercise Price

 

Term

 

Value

 

 

 

 

 

 

 

 

(in years)

 

 

 

 

Options outstanding at March 31, 2018

    

212,392

    

$

20.71

    

 

    

 

 

 

Granted

 

 —

 

$

 —

 

 

 

 

 

 

Exercised

 

 —

 

$

 —

 

 

 

 

 

 

Forfeited, cancelled or expired

 

(30,000)

 

$

20.47

 

 

 

 

 

 

Options outstanding at December 31, 2018

 

182,392

 

$

20.75

 

2.5

 

 

 —

 

Options fully vested at December 31, 2018 and those expected to vest beyond December 31, 2018

 

182,392

 

$

20.75

 

2.5

 

 

 —

 

Options exercisable at December 31, 2018

 

182,392

 

$

20.75

 

2.5

 

 

 —

 

 

Black-Scholes Model Valuation Assumptions

 

There were no stock options granted during either of the three or nine months ended December 31, 2018 or 2017. There was no expense associated with stock options during the three or nine months ended December 31, 2018. There was no expense associated with stock options during the three months ended December 31, 2017. The Company recorded expense of approximately $17,000 associated with its stock options during the nine months ended December 31, 2017. There were no unvested stock option awards as of December 31, 2018.

 

Restricted Stock Units and Performance Restricted Stock Units

 

The Company issued restricted stock units under the 2000 Plan and issues restricted stock units under the 2017 Plan to employees, non-employee directors and consultants. The restricted stock units are valued based on the closing price of the Company’s common stock on the date of issuance, and compensation cost is recorded on a straight-line basis over the vesting period. The restricted stock units vest over a period of two, three or four years. For restricted stock units with two year vesting, 100% vests on the second year anniversary. For restricted stock units with three year vesting, one-third vest annually beginning one year after the issuance date. For restricted stock units with four year vesting, one-fourth vest annually beginning one year after the issuance date. The restricted stock units issued to non-employee

12


 

Table of Contents

directors vest one year after the issuance date. The following table outlines the restricted stock unit and performance restricted stock unit (“PRSU”) activity:

 

 

 

 

 

 

 

 

 

 

 

 

Weighted

 

 

 

 

 

Average Grant

 

 

 

 

 

Date Fair

 

Restricted Stock Units and Performance Restricted Stock Units

 

Shares

 

Value

 

Nonvested restricted stock units outstanding at March 31, 2018

    

2,011,611

    

$

0.90

 

Granted

 

1,011,356

 

 

1.16

 

Vested and issued

 

(586,066)

 

 

0.90

 

Forfeited

 

(50,906)

 

 

0.93

 

Nonvested restricted stock units outstanding at December 31, 2018

 

2,385,995

 

 

1.01

 

Restricted stock units expected to vest beyond December 31, 2018

 

2,385,972

 

$

1.01

 

 

The following table provides additional information on restricted stock units for the Company’s three and nine months ended December 31, 2018 and 2017:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Three Months Ended

 

Nine Months Ended

 

 

 

December 31,

 

December 31,

 

 

    

2018

    

2017

    

2018

    

2017

 

Restricted stock compensation expense (in thousands)

 

$

292

    

$

102

 

$

743

    

$

389

 

Aggregate fair value of restricted stock units vested and issued (in thousands)

 

$

91

 

$

19

 

$

614

 

$

156

 

Weighted average grant date fair value of restricted stock units granted during the period

 

$

0.82

 

$

0.89

 

$

1.16

 

$

0.76

 

 

As of December 31, 2018, there was approximately $1.8 million of total compensation cost related to unvested restricted stock units that is expected to be recognized as expense over a weighted average period of 2.1 years.

The activity from the Company’s PRSU program is included in the above restricted stock units tables. The PRSU program has a two-year or three-year performance measurement period. The performance measurement period will begin on April 1 of the first fiscal year and end on March 31 of the second fiscal year or the third fiscal year. The PRSU program is intended to have overlapping performance measurement periods (e.g., a new three-year cycle begins each year on April 1), subject to Compensation Committee approval. At the end of each performance measurement period, the Compensation Committee will determine the achievement against the performance objectives.

During the nine months ended December 31, 2018, the Company granted 147,327 PRSUs with a three-year performance measurement period and the criteria measured by the Company’s free cash flow and aftermarket sales absorption. The target PRSU awards for each participant, will be paid upon achievement of the target level of performance for free cash flow and aftermarket sale absorption, taking into account the applicable weighting for the individual metric. Achievement of a performance goal at the threshold level will result in a payment that is 50% of the target PRSU award. Achievement of a performance goal at the maximum level will result in a payment that is 150% of the target PRSU award. The Compensation Committee will use an interpolation table that weights performance between levels for determining the portion of the Target PRSU that is earned. In addition, during the nine months ended December 31, 2018, the Company granted 150,000 PRSUs to its President and Chief Executive officer with a two-year performance measurement period and the criteria measured by the Company’s institutional ownership levels, Distributor Support System (“DSS program”) cash collections and Factory Protection Plan (“FPP”) gross margins. This equity award is 100% vesting in two years and based on predetermined equally weighted criteria. See Note 13—Revenue Recognition for additional discussion on the DSS program.

The weighted average per share grant date fair value of PRSUs granted during the nine months ended December 31, 2018 was $1.59. However, based on the Company’s assessment as of December 31, 2018 that the PRSU threshold for the first performance measurement likely would not be met, the fair value of the PRSU awards were adjusted to zero and no compensation expense was recorded or recognized during the nine months ended December 31, 2018. Any compensation expense will be recognized over the corresponding requisite service period and will be adjusted in subsequent reporting periods if the Company’s assessment of the probable level of achievement of the performance goals change. The Company will continue to periodically assess the likelihood of the PRSU threshold being met until the end of the applicable performance period.

13


 

Table of Contents

Restricted Stock Awards

The Company issued restricted stock awards under the 2000 Plan and issues restricted stock awards under the 2017 Plan to employees and non-employee directors. There were no restricted stock awards granted during the three and nine months ended December 31, 2018. There were no restricted stock awards granted during the three months ended December 31, 2017. During the nine months ended December 31, 2017, the Company issued a total of 3,969 shares of stock, to non-employee directors who elected to take payment of all or any part of the directors’ fees in stock in lieu of cash. The weighted average per share grant date fair value of shares of stock issued during the nine months ended December 31, 2017 was $0.63. The Company recorded expense of approximately $3,000 associated with its restricted stock awards during the nine months ended December 31, 2017.

 

For each term of the Board (beginning on the date of an annual meeting of stockholders and ending on the date immediately preceding the next annual meeting of stockholders), a non-employee director may elect to receive a stock award in lieu of all or any portion of their annual retainer or committee fee cash payment. The shares of stock were valued based on the closing price of the Company’s common stock on the date of grant.

Employee Stock Purchase Plan

In June 2000, the Company adopted the Employee Stock Purchase Plan (the “ESPP”). The ESPP provides for the granting of rights to purchase common stock to regular full and part-time employees or officers of the Company and its subsidiaries. In June 2017, the Board unanimously approved an amendment and restatement to the ESPP which was approved by the stockholders at the Company’s annual meeting of stockholders on August 31, 2017. Prior to the current amendment, 70,000 shares of the Company’s common stock had been reserved for issuance. As amended, the ESPP continued by its terms and the number of shares of the Company’s common stock available increased by 500,000 shares which reserved for issuance a total of 570,000 shares of common stock. Under the ESPP, shares of the Company’s common stock are issued upon exercise of the purchase rights. The ESPP will continue by its terms through June 30, 2020, unless terminated sooner.

Stockholder Rights Plan

On May 6, 2016, the Company entered into a rights agreement (the “NOL Rights Agreement”) with Broadridge Financial Solutions, Inc. successor-in-interest to Computershare Inc., as rights agent. In connection with the NOL Rights Agreement, the Company’s Board authorized and declared a dividend distribution of one preferred stock purchase right (a “Right”) for each share of the Company’s common stock authorized and outstanding. Each Right entitles the registered holder to purchase from the Company a unit consisting of one one-thousandth of a share of Series B Junior Participating Preferred Stock, par value $0.001 per share, at a purchase price of $8.76 per unit, subject to adjustment. The description and terms of the Rights are set forth in the NOL Rights Agreement.

The purpose of the NOL Rights Agreement is to diminish the risk that the Company’s ability to use its net operating losses and certain other tax assets (collectively, “Tax Benefits”) to reduce potential future federal income tax obligations would become subject to limitations by reason of the Company’s experiencing an “ownership change,” as defined in Section 382 of the Internal Revenue Code of 1986. A company generally experiences such an ownership change if the percentage of its stock owned by its “5-percent shareholders,” as defined in Section 382 of the Internal Revenue Code of 1986, increases by more than 50 percentage points over a rolling three-year period. The NOL Rights Agreement is designed to reduce the likelihood that the Company will experience an ownership change under Section 382 of the Internal Revenue Code of 1986 by (i) discouraging any person or group from becoming a 4.99% shareholder and (ii) discouraging any existing 4.99% shareholder from acquiring additional shares of the Company’s stock.

The Rights will not be exercisable until the earlier to occur of (i) the close of business on the tenth business day after a public announcement or filing that a person has, or group of affiliated or associated persons or persons acting in concert have, become an “Acquiring Person,” which is defined as a person or group of affiliated or associated persons or persons acting in concert who, at any time after the date of the NOL Rights Agreement, have acquired, or obtained the right to acquire, beneficial ownership of 4.99% or more of the Company’s outstanding shares of common stock, subject to certain exceptions or (ii) the close of business on the tenth business day after the commencement of, or announcement of an intention to commence, a tender offer or exchange offer the consummation of which would result in any person becoming an Acquiring Person (the earlier of such dates being called the “Distribution Date”). Certain synthetic interests in securities created by derivative positions, whether or not such interests are considered to be ownership of the

14


 

Table of Contents

underlying common stock or are reportable for purposes of Regulation 13D of the Exchange Act, are treated as beneficial ownership of the number of shares of common stock equivalent to the economic exposure created by the derivative position, to the extent actual shares of the common stock are directly or indirectly held by counterparties to the derivatives contracts.

The Rights, which are not exercisable until the Distribution Date, will expire prior to the earliest of (i) May 6, 2019 or such later day as may be established by the Board prior to the expiration of the Rights, provided that the extension is submitted to the Company’s stockholders for ratification at the next annual meeting of stockholders of the Company succeeding such extension; (ii) the time at which the Rights are redeemed pursuant to the NOL Rights Agreement; (iii) the time at which the Rights are exchanged pursuant to the NOL Rights Agreement; (iv) the time at which the Rights are terminated upon the occurrence of certain transactions; (v) the close of business on the first day after the 2017 Annual Meeting of stockholders, if approval by the stockholders of the Company of the NOL Rights Agreement has not been obtained on or prior to the close of business on the first day after the 2017 Annual Meeting of stockholders; (vi) the close of business on the effective date of the repeal of Section 382 of the Internal Revenue Code of 1986, if the Board of Directors determines that the NOL Rights Agreement is no longer necessary or desirable for the preservation of Tax Benefits; and (vii) the close of business on the first day of a taxable year of the Company to which the Board determines that no Tax Benefits are available to be carried forward.

Each share of Series B Junior Participating Preferred Stock will be entitled, when, as and if declared, to a preferential per share quarterly dividend payment equal to the greater of (i) $1.00 per share or (ii) an amount equal to 1,000 times the dividend declared per share of common stock. Each share of Series B Junior Participating Preferred Stock will entitle the holder thereof to 1,000 votes on all matters submitted to a vote of the stockholders of the Company. In the event of any merger, consolidation or other transaction in which shares of common stock are converted or exchanged, each share of Series B Junior Participating Preferred Stock will be entitled to receive 1,000 times the amount received per one share of common stock.

At the 2017 Annual Meeting, the stockholders approved the NOL Rights Agreement.

9.   Offerings of Common Stock and Warrants and At-the-Market Offering Program

 

On June 7, 2018, the Company entered into a sales agreement with H.C. Wainwright & Co., LLC with respect to an at-the-market offering program pursuant to which the Company may offer and sell, from time to time at its sole discretion, shares of its common stock, having an aggregate offering price of up to $25.0 million. The Company will set the parameters for sales of the shares, including the number to be sold, the time period during which sales are requested to be made, any limitation on the number that may be sold in one trading day and any minimum price below which sales may not be made. During the three months ended December 31, 2018, the Company issued 3.9 million shares of the Company’s common stock under this at-the-market offering program and the net proceeds to the Company from the sale of the Company’s common stock were approximately $2.9 million after deducting commissions paid of approximately $0.1 million. During the nine months ended December 31, 2018, the Company issued 7.6 million shares of the Company’s common stock under the at-the-market offering program and the net proceeds to the Company from the sale of the Company’s common stock were approximately $6.9 million after deducting commissions paid of approximately $0.2 million. As of December 31, 2018, approximately $17.8 million remained available for issuance with respect to this at-the-market offering program.

On April 13, 2018, a warrant holder exercised its rights to the warrant agreement to exercise on a cashless basis 5,760,000 Series A warrants at an exercise price of $0.60 per share under the warrant agreement. In accordance with terms of the warrant agreement, after taking into account the shares withheld to satisfy the cashless exercise option, the Company issued 3,806,243 shares of common stock.

As of December 31, 2018, there were 2,718,750 Series A warrants outstanding and there are no Series B warrants outstanding. Of the total Series A warrants outstanding, 2,178,750 Series A warrants were issued with an exercise price of $2.55 per share of common stock, and have an expiration date of October 25, 2021, and 540,000 Series A warrants with anti-dilution provisions were issued with an initial exercise price of $1.34 per share of common stock, and have an expiration date of April 22, 2021. As of December 31, 2018, the 540,000 Series A warrants with anti-dilution provisions had an exercise price of $0.57 per share of common stock.

15


 

Table of Contents

Effective August 28, 2015, the Company entered into a sales agreement with Cowen and Company, LLC with respect to an at-the-market offering program pursuant to which the Company offered and sold, from time to time at its sole discretion, shares of its common stock, having an aggregate offering price of up to $30.0 million. During the nine months ended December 31, 2018, the Company issued 2.8 million shares of the Company’s common stock under this at-the-market offering program and the net proceeds to the Company from the sale of the Company’s common stock were approximately $4.0 million after deducting commissions paid of approximately $0.1 million. As of December 31, 2018, 26.0 million shares of the Company’s common stock were cumulatively sold pursuant to the at-the-market offering program and the net proceeds to the Company from the sale of the common stock were approximately $28.6 million after deducting commissions paid of approximately $0.8 million. This at-the-market offering program expired on May 29, 2018.  

 

10.  Fair Value Measurements

 

The FASB has established a framework for measuring fair value using generally accepted accounting principles. That framework provides a fair value hierarchy that prioritizes the inputs to valuation techniques used to measure fair value. The hierarchy gives the highest priority to unadjusted quoted prices in active markets for identical assets or liabilities (level 1 measurements) and the lowest priority to unobservable inputs (level 3 measurements). The three levels of the fair value hierarchy are described as follows:

 

Level 1.  Inputs to the valuation methodology are unadjusted quoted prices for identical assets or liabilities in active markets.

 

Level 2.  Inputs to the valuation methodology include:

 

·

Quoted prices for similar assets or liabilities in active markets

 

·

Quoted prices for identical or similar assets or liabilities in inactive markets

 

·

Inputs other than quoted prices that are observable for the asset or liability

 

·

Inputs that are derived principally from or corroborated by observable market data by correlation or other means

 

If the asset or liability has a specified (contractual) term, the level 2 input must be observable for substantially the full term of the asset or liability.

 

Level 3.  Inputs to the valuation methodology are unobservable and significant to the fair value measurement.

 

The asset or liability’s fair value measurement level within the fair value hierarchy is based on the lowest level of any input that is significant to the fair value measurement. Valuation techniques used must maximize the use of observable inputs and minimize the use of unobservable inputs.

 

The table below presents our assets and liabilities that are measured at fair value on a recurring basis at December 31, 2018 and are categorized using the fair value hierarchy (in thousands):

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fair Value Measurements at December 31, 2018

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Quoted Prices in

 

Significant Other

 

Significant

 

 

 

 

 

 

Active Markets for

 

Observable

 

Unobservable

 

 

 

 

 

 

Identical Assets

 

Inputs

 

Inputs

 

 

 

Total

 

(Level 1)

 

(Level 2)

 

(Level 3)

 

Restricted cash

    

$

6,000

    

$

6,000

    

$

 —

    

$

 —

 

 

16


 

Table of Contents

The table below presents our assets and liabilities that are measured at fair value on a recurring basis at March 31, 2018 and are categorized using the fair value hierarchy (in thousands):

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fair Value Measurements at March 31, 2018

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Quoted Prices in

 

Significant Other

 

Significant

 

 

 

 

 

 

Active Markets for

 

Observable

 

Unobservable

 

 

 

 

 

 

Identical Assets

 

Inputs

 

Inputs

 

 

 

Total

 

(Level 1)

 

(Level 2)

 

(Level 3)

 

Restricted cash

    

$

5,000

    

$

5,000

    

$

 —

    

$

 —

 

 

Basis for Valuation

 

The carrying values reported in the consolidated balance sheets for cash and cash equivalents, restricted cash, accounts receivable and accounts payable approximate fair values because of the immediate or short-term maturities of these financial instruments. As the Company's obligations under the Credit Facility are based on adjustable market rates reflective of what would currently be available to the Company, the Company has determined that the carrying value approximates the fair value. The carrying values and estimated fair values of these obligations are as follows (in thousands):

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

As of

 

As of

 

 

 

December 31, 2018

 

March 31, 2018

 

 

 

Carrying

 

Estimated

 

Carrying

 

Estimated

 

 

    

Value

 

Fair Value

 

Value

    

Fair Value

 

Obligations under the credit facility

    

$

10,736

  

$

10,736

 

$

8,527

 

$

8,527

 

 

 

11.  Revolving Credit Facility

 

Former Credit Facility  The Company maintained two Credit and Security Agreements, as amended, with Wells Fargo, which provided the Company with a line of credit of up to $20.0 million in the aggregate. Interest expense related the former credit facility with Wells Fargo during the nine months ended December 31, 2017 was $0.2 million, which includes $0.1 million in amortization of deferred financing costs.

New Credit Facility  The Company maintains Bridge Bank Credit Agreements with Western Alliance Bank through Bridge Bank, with credit support provided by the Export-Import Bank of the United States through its working capital guarantee program. Under the terms of the Bridge Bank Credit Agreements, the Company may borrow up to $15.0 million on a revolving basis depending on, among other factors, the amount of its eligible inventory and accounts receivable. The Bridge Bank Credit Agreements will terminate in accordance with their terms on June 2, 2021.

On June 1, 2018, the Company entered into a letter agreement (the “Letter Agreement”) with Bridge Bank. The Letter Agreement extended the maturity date under the Company’s Bridge Bank Credit Agreements from June 2, 2019 to June 2, 2021. The Letter Agreement increased the line of credit to an amount up to $15.0 million from $12.0 million. Additionally, the Letter Agreement reduced the per annum interest rate from prime rate plus 1.50 percent to prime rate plus 1.00 percent; the facility fee from 0.625% to 0.5%, and the cash collateral held at Bridge Bank from 42% to 40%, which is $6.0 million of the $15.0 million facility, as well as no fee for early termination.

Total borrowings, letter of credit obligations and the then aggregate committed amount of cash management services under the Bridge Bank Credit Agreements may not exceed 85% of the sum of unrestricted cash and the amount of cash collateral held at Bridge Bank. As a condition of the Bridge Bank Credit Agreements, the Company has restricted $6.0 million of cash equivalents as additional security for the credit facility. Borrowings under the Bridge Bank Credit Agreements will bear per annum interest at the prime rate plus 1.0 percent, subject to increase during the occurrence of an event of default. Obligations under the Bridge Bank Credit Agreements are secured by all of the Company’s assets, including intellectual property and general intangibles. The Company has incurred $0.4 million in origination fees. These fees have been recorded under the caption “Prepaid expenses and other current assets” in the accompanying condensed consolidated balance sheets and will be amortized to interest expense through June 2021. As of December 31, 2018, $10.7 million in borrowings were outstanding and approximately $4.3 million borrowings were available under the credit facility. Interest expense related to the new credit facility during the three months ended December 31, 2018 was $0.2 million, which includes $46,900 in amortization of deferred financing costs. Interest

17


 

Table of Contents

expense related to the new credit facility during the three months ended December 31, 2017 was $0.2 million, which includes $34,300 in amortization of deferred financing costs. Interest expense related to the new credit facility during the nine months ended December 31, 2018 was $0.5 million, which includes $0.1 million in amortization of deferred financing costs. Interest expense related to the new credit facility during the nine months ended December 31, 2017 was $0.3 million, which includes $0.1 million in amortization of deferred financing costs. The Company’s borrowing rate was 6.5% at December 31, 2018.

The Bridge Bank Credit Agreements include affirmative covenants as well as negative covenants that prohibit a variety of actions without Bridge Bank’s consent, including covenants that limit the Company’s ability to (a) incur or guarantee debt, (b) create liens, (c) enter into any merger, recapitalization or similar transaction or purchase all or substantially all of the assets or stock of another entity or (d) sell, assign, transfer or otherwise dispose of the Company’s assets. 

The financial covenants of the domestic credit agreement with Bridge Bank (the “Domestic Facility”), which is included in the Bridge Bank Credit Agreements, requires the Company not to exceed specified levels of losses relative to its financial model and the outstanding line of credit advances may not exceed 85% of the sum of unrestricted cash and the amount of cash collateral held at Bridge Bank. The Domestic Facility also defines an event of default to include a material adverse effect on the Company’s business. An event of default for this or any other reason, if not waived, could have a material adverse effect on the Company. As of December 31, 2018 we were in compliance with the covenants contained in the Bridge Bank Credit Agreements for Fiscal 2019. 

 

12.  Accrued Warranty Reserve

 

The Company provides for the estimated costs of warranties at the time revenue is recognized. The specific terms and conditions of those warranties vary depending upon the microturbine product sold and the geography of sale. The Company’s product warranties generally start from the delivery date and continue for up to twenty-four months. Factors that affect the Company’s warranty obligation include product failure rates, anticipated hours of product operations and costs of repair or replacement in correcting product failures. These factors are estimates that may change based on new information that becomes available each period. Similarly, the Company also accrues the estimated costs to address reliability repairs on products no longer in warranty when, in the Company’s judgment, and in accordance with a specific plan developed by the Company, it is prudent to provide such repairs. The Company assesses the adequacy of recorded warranty liabilities quarterly and makes adjustments to the liability as necessary. When the Company has sufficient evidence that product changes are altering the historical failure occurrence rates, the impact of such changes is then taken into account in estimating future warranty liabilities. Changes in accrued warranty reserve during the nine months ended December 31, 2018 are as follows (in thousands):

 

 

 

 

 

 

 

 

 

 

Balance, beginning of the period

 

$

1,682

 

Standard warranty provision

 

 

1,921

 

Deductions for warranty claims

 

 

(1,034)

 

Balance, end of the period

 

$

2,569

 

 

 

18


 

Table of Contents

13.  Revenue Recognition

On April 1, 2018, the Company adopted the new revenue standard ASU 2014-09 and applied it to all contracts using the modified retrospective method. The Company determined there was no change in applying the new revenue standard, therefore no adjustment to the opening balance of accumulated deficit was needed.

The Company derives its revenues primarily from system sales, service contracts and professional services. Revenues are recognized when control of the systems and services is transferred to the Company’s customers in an amount that reflects the consideration it expects to be entitled to in exchange for those services.

The Company determines revenue recognition through the following steps:

•        Identification of the contract, or contracts, with a customer

•        Identification of the performance obligations in the contract

•        Determination of the transaction price

•        Allocation of the transaction price to the performance obligations in the contract

•        Recognition of revenue when, or as, the Company satisfies a performance obligation

The Company recognizes revenue when performance obligations identified under the terms of contracts with its customers are satisfied, which generally occurs, for systems, upon the transfer of control in accordance with the contractual terms and conditions of the sale. The majority of the Company’s revenue associated with systems is recognized at a point in time when the system is shipped to the customer. Revenue from service contracts and post-shipment performance obligations is recognized when or as those obligations are satisfied. The Company primarily offers assurance-type standard warranties that do not represent separate performance obligations and will separately offer and price extended warranties that are separate performance obligations for which the associated revenue is recognized over-time based on the extended warranty period. The Company records amounts billed to customers for reimbursement of shipping and handling costs within revenue. Shipping and handling costs associated with outbound freight after control over a system has transferred to a customer are accounted for as fulfillment costs and are included in cost of goods sold. Sales taxes and other usage-based taxes are excluded from revenue.

Comprehensive Factory Protection Plan (“FPP”) service contracts require payment at the beginning of the contract period. Advance payments are not considered a significant financing component as they are typically received less than one year before the related performance obligations are satisfied. These payments are treated as a contract liability and are classified in deferred revenue in the Condensed Consolidated Balance Sheets. Once control transfers to the customer and the Company meets the revenue recognition criteria, the deferred revenue is recognized in the Condensed Consolidated Statement of Operations. The deferred revenue relating to the annual maintenance service contracts is recognized in the Condensed Consolidated Statement of Operations on a straight line basis over the expected term of the contract.

Significant Judgments - Contracts with Multiple Performance Obligations

The Company enters into contracts with its customers that often include promises to transfer multiple products, parts, accessories, FPP and services. A performance obligation is a promise in a contract with a customer to transfer products or services that are distinct. Determining whether products and services are distinct performance obligations that should be accounted for separately or combined as one unit of accounting may require significant judgment.

Products, parts and accessories are distinct as such services are often sold separately. In determining whether FPP and service contracts are distinct, the Company considers the following factors for each FPP and services agreement: availability of the services from other vendors, the nature of the services, the timing of when the services contract was signed in comparison to the product delivery date and the contractual dependence of the product on the

19


 

Table of Contents

customer’s satisfaction with the professional services work. To date, the Company has concluded that all of the FPP and services contracts included in contracts with multiple performance obligations are distinct.

The Company allocates the transaction price to each performance obligation on a relative standalone selling price (“SSP”) basis. The SSP is the price at which the Company would sell a promised product or service separately to a customer. Judgment is required to determine the SSP for each distinct performance obligation.

The Company determines SSP by considering its overall pricing objectives and market conditions. Significant pricing practices taken into consideration include the Company’s discounting practices, the size and volume of the Company’s transactions, the customer demographic, the geographic area where systems and services are sold, price lists, its go-to-market strategy, historical sales and contract prices. The determination of SSP is made through consultation with and approval by the Company’s management, taking into consideration the go-to-market strategy. As the Company’s go-to-market strategies evolve, the Company may modify its pricing practices in the future, which could result in changes to SSP.

In certain cases, the Company is able to establish SSP based on observable prices of products or services sold separately in comparable circumstances to similar customers. The Company uses a single amount to estimate SSP when it has observable prices.

If SSP is not directly observable, for example when pricing is highly variable, the Company uses a range of SSP. The Company determines the SSP range using information that may include market conditions or other observable inputs. The Company typically has more than one SSP for individual products and services due to the stratification of those products and services by customer size and geography.

The following table presents disaggregated revenue by business group for the three and nine months ended December 31, 2018 (in thousands):

 

 

 

 

 

 

 

 

 

 

Three Months Ended

 

Nine Months Ended

 

 

    

December 31, 2018

    

December 31, 2018

    

Microturbine Products

 

$

10,120

 

$

38,630

 

Accessories and Parts

 

 

3,190

 

 

10,392

 

Total Product, Accessories and Parts

 

 

13,310

 

 

49,022

 

Service

 

 

4,720

 

 

12,371

 

Total Revenue

 

$

18,030

 

$

61,393

 

Following is the geographic revenue information based on the primary operating location of the Company’s customers for the three and nine months ended December 31, 2018 (in thousands):

 

 

 

 

 

 

 

 

 

 

Three Months Ended

 

Nine Months Ended

 

 

    

December 31, 2018

    

December 31, 2018

    

United States

 

$

9,396

 

$

31,208

 

Mexico

 

 

2,422

 

 

4,217

 

All other North America

 

 

248

 

 

515

 

Total North America

 

 

12,066

 

 

35,940

 

Europe

 

 

2,822

 

 

9,473

 

United Kingdom

 

 

158

 

 

2,717

 

Columbia

 

 

196

 

 

2,855

 

Asia

 

 

1,175

 

 

4,241

 

Australia

 

 

1,386

 

 

2,751

 

Kuwait

 

 

 —

 

 

2,161

 

All other

 

 

227

 

 

1,255

 

Total Revenue

 

$

18,030

 

$

61,393

 

20


 

Table of Contents

 

Contract Balances

Our contract liabilities consist of advance payments for systems as well as deferred revenue on service obligations and extended warranties. The current portion of deferred revenue is included in current liabilities under deferred revenue and the non-current portion of deferred revenue is included in other non-current liabilities in the Condensed Consolidated Balance Sheet.

As of December 31, 2018 the balance of deferred revenue was approximately $5.9 million compared to $6.6 million as of March 31, 2018. This overall decrease in the balance of deferred revenue of $0.7 million during the nine months ended December 31, 2018 was comprised of decreases in deferred revenue attributable to the Distributor Support System (“DSS program”) of $1.1 million and deferred revenue attributable to deposits of $0.5 million, offset by an increase in deferred revenue attributable to FPP contracts of $0.9 million. Changes in deferred revenue during the nine months ended December 31, 2018 are as follows (in thousands):

 

 

 

 

 

 

 

 

    

FPP Balance, beginning of the period

 

$

3,549

 

FPP Billings

 

 

11,511

 

FPP Revenue recognized

 

 

(10,589)

 

Balance attributed to FPP contracts

 

 

4,471

 

DSS program

 

 

 7

 

Deposits

 

 

1,434

 

Deferred revenue balance, end of the period

 

$

5,912

 

 

Deferred revenue attributed to FPP contracts represents the unearned portion of the billed agreements. FPP agreements are generally paid quarterly in advance with revenue recognized on a straight line basis over the contract period. The DSS program began January 1, 2018 and service revenue derived from the DSS program began in March 2018 and is recognized on a pro rata basis as the distributors purchase our products. Deferred revenue attributed to deposits are primarily non-refundable cash payments from distributors for future orders.

As of December 31, 2018, approximately $4.5 million of revenue is expected to be recognized from remaining performance obligations for FPP service contracts. The Company expects to recognize revenue on approximately $3.3 million of these remaining performance obligations over the next 12 months and the balance of $1.2 million will be recognized thereafter. Revenue from remaining performance obligations for professional services contracts as of December 31, 2018 was not material.

Unsatisfied Performance Obligations

The Company has elected the practical expedient to disclose only the value of unsatisfied performance obligations for contracts with an original expected length greater than one year. The majority of the Company’s revenues resulted from sales of inventoried systems with short periods of manufacture and delivery and thus are excluded from this disclosure.

Practical Expedients

We apply a practical expedient to expense costs as incurred for costs to obtain a contract when the amortization period would have been one year or less. These costs are recorded within sales and marketing expenses.

 

14.  Other Current Liabilities

The Company is a party to a Development and License Agreement with Carrier Corporation (“Carrier”) regarding the payment of royalties on the sale of each of the Company’s 200 kilowatt (“C200”) microturbines. On July 25, 2018, the Company and Carrier entered into a Second Amendment to the Development and License Agreement (“Second Amendment”) whereby the Company agreed to pay Carrier approximately $3.0 million to conclude the Company’s current royalty obligation under the Development and License Agreement, dated as of September 4, 2007, as amended (“Development Agreement”) and release the Company from any future royalty payment obligations. The Second Amendment also removed non-compete provisions from the Development Agreement, allowing the Company to

21


 

Table of Contents

design market or sell its C200 System in conjunction with any energy system and compete with Carrier products in the CCHP market.  Carrier earned zero and $0.2 million in royalties for C200 and C1000 Series system sales during the three and nine months ended December 31, 2018, respectively. Carrier earned $0.3 million and $0.7 million in royalties for C200 and C1000 Series system sales during the three and nine months ended December 31, 2017, respectively. Earned royalties of approximately $0.2 million were unpaid as of March 31, 2018, and are included in accrued expenses in the accompanying condensed consolidated balance sheets.

On September 19, 2018, the Company paid in full the negotiated royalty settlement of $3.0 million to Carrier, and as such, there is no further royalty obligation to Carrier. The prepaid royalty of $3.0 million has been recorded under the captions “Prepaid expenses and other current assets” and “Other assets” in the accompanying condensed consolidated balance sheets and will be amortized in the accompanying condensed consolidated statement of operations over a 15-year amortization period through September 2033 using an effective royalty rate. The effective royalty rate is calculated as the prepaid royalty settlement divided by total projected C200 System units over the 15-year amortization period. On a quarterly basis, the Company will perform a re-forecast of C200 System unit shipments, to see if a change needs to be made to the effective royalty rate. Accordingly, if the Company’s future projections change, its effective royalty rates would change, which could affect the amount and timing of royalty expense the Company recognizes. If impairment exists, then the prepaid royalty asset could be written down to fair value. Prepaid royalties are classified as current assets to the extent that such amounts will be recognized in the Company’s condensed consolidated statements of operations within the next 12 months. The current and long-term portions of prepaid royalties, included in other current assets and other assets, respectively, consisted of (in thousands):

 

 

 

 

 

 

 

December 31,

 

 

    

2018

 

Other current assets

 

$

124

 

Other assets

 

 

2,799

 

Royalty-related assets

 

$

2,923

 

 

 

15.  Commitments and Contingencies

Purchase Commitments

As of December 31, 2018, the Company had firm commitments to purchase inventories of approximately $37.4 million through Fiscal 2021. Certain inventory delivery dates and related payments are not firmly scheduled; therefore, amounts under these firm purchase commitments will be payable upon the receipt of the related inventories.

Lease Commitments

The Company leases offices and manufacturing facilities under various non-cancelable operating leases expiring at various times through Fiscal 2025. All of the leases require the Company to pay maintenance, insurance and property taxes. The lease agreements for primary office and manufacturing facilities provide for rent escalation over the lease term and renewal options for five-year periods. Rent expense is recognized on a straight-line basis over the term of the lease. The difference between rent expense recorded and the amount paid is credited or charged to deferred rent, which is included in other long-term liabilities in the accompanying balance sheets. The balance of deferred rent was approximately $0.4 million as of December 31, 2018 and March 31, 2018, respectively. Rent expense was approximately $0.6 million and $0.5 million during the three months ended December 31, 2018 and 2017, respectively. Rent expense was approximately $1.7 million and $1.6 million during the nine months ended December 31, 2018 and 2017, respectively.

Other Commitments

The Company has agreements with certain of its distributors requiring that if the Company renders parts obsolete in inventories the distributors own and hold in support of their obligations to serve fielded microturbines, then the Company is required to replace the affected stock at no cost to the distributors. While the Company has never incurred costs or obligations for these types of replacements, it is possible that future changes in the Company’s product technology could result and yield costs to the Company if significant amounts of inventory are held at distributors. As of December 31, 2018, no significant inventories were held at distributors.

22


 

Table of Contents

Legal Matters

Federal Securities Class Action

Two putative securities class action complaints were filed against the Company and certain of its current and former officers in the United States District Court for the Central District of California under the following captions:  David Kinney, etc. v. Capstone Turbine, et al., No. 2:15-CV-08914 on November 16, 2015 (the “Kinney Complaint”) and Kevin M. Grooms, etc. v. Capstone Turbine, et al., No. 2:15-CV-09155 on November 25, 2015 (the “Grooms Complaint”).

The putative class in the Kinney Complaint was comprised of all purchasers of the Company’s securities between November 7, 2013 and November 5, 2015. The Kinney Complaint alleges material misrepresentations and omissions in public statements regarding BPC and the likelihood that BPC would not be able to fulfill many legal and financial obligations to the Company.  The Kinney Complaint also alleges that the Company’s financial statements were not appropriately adjusted in light of this situation and were not maintained in accordance with GAAP, and that the Company lacked adequate internal controls over accounting. The Kinney Complaint alleges that these public statements and accounting irregularities constituted violations by all named defendants of Section 10(b) of the Exchange Act, and Rule 10b-5 thereunder, as well as violations of Section 20(a) of the Exchange Act by the individual defendants.  The Grooms Complaint makes allegations and claims that are substantially identical to those in the Kinney Complaint, and both complaints seek compensatory damages of an undisclosed amount.  On January 16, 2016, several shareholders filed motions to consolidate the Kinney and Grooms actions and for appointment as lead plaintiff.  On February 29, 2016, the Court granted the motions to consolidate, and appointed a lead plaintiff.  On May 6, 2016, a Consolidated Amended Complaint with allegations and claims substantially identical to those of the Kinney Complaint was filed in the consolidated action.  The putative class period in the Consolidated Amended Complaint is June 12, 2014 to November 5, 2015.  Defendants filed a motion to dismiss the Consolidated Amended Complaint on June 17, 2016. On March 10, 2017, the Court issued an order granting Defendants’ motion to dismiss in its entirety with leave to amend. Plaintiffs filed an amended complaint on April 28, 2017.  On February 9, 2018, the Court issued an Order denying Defendants’ motion to dismiss.  On March 30, 2018, Defendants filed an answer to the Consolidated Amended Complaint.  On May 17, 2018, the Court issued a scheduling order setting a trial date of March 17, 2020.  On June 26, 2018, the Court entered an order vacating all deadlines through the end of October 2018 and temporarily staying formal discovery and other proceedings to allow the parties time to conduct a mediation.  The parties participated in mediation on September 24, 2018, which did not result in a settlement. On November 16, 2018, after further settlement discussions, the parties advised the Court that they had reached an agreement in principle to settle the action in its entirety. The agreement in principle is subject to several conditions, including the execution of a stipulation of settlement that is satisfactory to all parties, and preliminary and final approval from the court, among other things. The deadline to file the motion for preliminary approval of the proposed settlement is March 7, 2019. If the settlement is finalized and approved by the Court, the Company’s insurance carrier will fund the settlement amount. The Company has not recorded any liability as of December 31, 2018 since any potential loss is not probable or reasonably estimable given the current status of the proceedings.

Federal Individual Securities Action

An individual securities complaint was filed against us, our Chief Executive Officer, and additional unidentified defendants in the United States District Court for the Central District of California under the following caption:  FiveT Investment Management LTD, et al., v. Capstone Turbine, et al., No. 2:18-CV-03512 on April 25, 2018.  The lawsuit alleges material misrepresentations and omissions regarding our revenue, sales, and operations because of alleged improper revenue recognition and backlog calculations related to BPC. The lawsuit alleged that these statements constituted violations by all named defendants of Section 10(b) of the Exchange Act, and Rule 10b-5 thereunder, as well as violations of Section 20(a) of the Exchange Act by the individual defendants.  The complaint also asserted claims against all named defendants for fraud, negligent misrepresentation, violations of California Civil Code sections 1709 and 1710, and California Corporations Code sections 25400 and 25401. Additionally, the complaint asserted a cause of action against the individual defendants for breach of fiduciary duty. It demanded compensatory damages for the amount of damages allegedly suffered, pre-judgment and post-judgment interest, and fees.

On June 29, 2018, the plaintiffs filed an Amended Complaint for Common Law Fraud and Negligent Misrepresentation.  The Amended Complaint asserts claims for common law fraud and negligent misrepresentation, against the Company, Mr. Jamison, and unidentified individual defendants. The Amended Complaint demands damages

23


 

Table of Contents

in an unspecified amount, plus pre-judgment and post-judgment interest and fees.  Defendants filed their answer to the Amended Complaint on August 17, 2018. The parties participated in a mediation on September 24, 2018.  The mediation did not result in a settlement.  On October 12, 2018, the plaintiffs filed a motion for leave to amend their complaint, seeking to reinstate the cause of action for violation of California Civil Code section 25401. On November 29, 2018, the Court granted plaintiffs’ motion for leave to amend and plaintiffs filed their Second Amended Complaint, which asserts claims for common law fraud, negligent misrepresentation, and violation of California Civil Code section 25401 against the Company, Mr. Jamison, and unidentified individual defendants. On December 20, 2018, defendants filed their answer to the Second Amended Complaint. The parties are now engaged in discovery. The Company has not recorded any liability as of December 31, 2018 since any potential loss is not probable or reasonably estimable given the current status of the proceedings.   

State Derivative Lawsuits — California

On February 18, 2016, a purported shareholder derivative action was filed in Los Angeles Superior Court in the State of California against the Company and certain of its current and former officers and directors under the following caption:  Stesiak v. Jamison, et al., No. BC610782.  The lawsuit alleges that certain of the Company’s current and former officers and directors knew or should have known that BPC would be unable to fulfill its obligations to the Company, but allowed the Company to make false and misleading statements regarding BPC and the Company’s financial condition.  The complaint also alleges that the defendants failed to timely adjust the Company’s account receivables and backlog to reflect BPC’s inability to pay the Company. The complaint asserts causes of action for breach of fiduciary duty and unjust enrichment.  It demands damages for the amount of damage sustained by the Company as a result of the individual defendants’ alleged breach of fiduciary duties and unjust enrichment, that the Company institute corporate governance reforms, and disgorgement from the individual defendants.  On May 5, 2016, the parties filed a stipulation and proposed order seeking to stay this action until such time as the defendants’ motion(s) to dismiss the federal securities class action are either granted with prejudice or denied in whole or in part.  On May 10, 2016, the Court entered that proposed order.  On March 9, 2018, following the Court’s order denying Defendants’ motion to dismiss in the federal securities class action, the parties filed a stipulation and proposed order seeking to stay this action until the close of fact discovery in the federal securities class action. On March 20, 2018, the Court entered that proposed order.  A status conference is scheduled for March 8, 2019.

On June 8, 2016, a purported shareholder derivative action entitled Velma Kilpatrick v. Simon, et al., No. BC623167, was filed in Los Angeles Superior Court in the State of California against the Company and certain of its current and former officers and directors.  The complaint alleges that certain of the Company’s current and former officers and directors knew or should have known that BPC would be unable to fulfill its obligations to the Company, but allowed the Company to make false and misleading statements regarding BPC and the Company’s financial condition.  The complaint also alleges that the defendants failed to timely adjust the Company’s account receivables and backlog to reflect BPC’s inability to pay the Company. The complaint asserts causes of action for breach of fiduciary duty. It demands damages for the amount of damage sustained by the Company as a result of the individual defendants’ alleged breach of fiduciary duties, and that the Company institute corporate governance reforms.  On August 23, 2016, the parties filed a stipulation and proposed order seeking to stay this action until such time as the defendants’ motion(s) to dismiss the federal securities class action are either granted with prejudice or denied in whole or in part.  On March 9, 2018, following the Court’s order denying Defendants’ motion to dismiss in the federal securities class action, the parties filed a stipulation and proposed order seeking to stay this action until the close of fact discovery in the federal securities class action.  On March 20, 2018, the Court entered that proposed order.  A status conference is scheduled for March 11, 2019.

The parties in both of the above state derivative lawsuits participated in a mediation held on September 24, 2018. The parties did not reach a settlement on the day of the mediation and negotiations are ongoing.

Federal Derivative Lawsuits

On March 7, 2016, a purported shareholder derivative action was filed in the United States District Court for the Central District of California against the Company and certain of its current and former officers and directors under the following caption:  Haber v. Jamison, et al., No. CV16-01569-DMG (RAOx).  The lawsuit alleges that certain of the Company’s current and former officers and directors knew or should have known that BPC would be unable to fulfill its obligations to the Company, but allowed the Company to make false and misleading statements regarding BPC and the Company’s financial condition.  The complaint asserts a cause of action for breach of fiduciary duty.  It demands

24


 

Table of Contents

damages for the amount of damage sustained by the Company as a result of the individual defendants’ alleged breach of fiduciary duties, and equitable relief, including that the Company institute appropriate corporate governance reforms.  On May 11, 2016, the parties filed a stipulation and proposed order seeking to stay this action until such time as the defendants’ motion(s) to dismiss the federal securities class action are either granted with prejudice or denied in whole or in part. On May 13, 2016, the Court entered that proposed order.  

On July 12, 2016 and July 18, 2016, respectively, two additional purported shareholder derivative actions were filed in the United States District Court for the Central District of California against the Company and certain of its current and former officers and directors, under the caption Tuttle v. Atkinson, et al., No. CV16-05127, and Boll v. Jamison, et al., No. CV16-5282, respectively.  The lawsuits allege that certain of the Company’s current and former officers and directors knew or should have known that BPC would be unable to fulfill its obligations to the Company, but allowed the Company to make false and misleading statements regarding BPC and the Company’s financial condition.  The Tuttle complaint asserts causes of action for breach of fiduciary duty, gross mismanagement, and unjust enrichment, and the Boll complaint asserts causes of action for breach of fiduciary duty, unjust enrichment, abuse of control, gross mismanagement, and waste of corporate assets. Both complaints demand damages sustained by the Company as a result of the individual defendants’ alleged breaches of fiduciary duties, and equitable relief, including that the Company institute appropriate corporate governance reforms. The federal derivative actions were stayed until such time as the defendants’ motion(s) to dismiss the federal securities class action are either granted with prejudice or denied in whole or in part. On March 9, 2018, following the Court’s order denying Defendants’ motion to dismiss in the federal securities class action, the parties filed a stipulation and proposed order seeking to stay this action until the close of fact discovery in the federal securities class action. On March 13, 2018, the Court granted the parties’ stipulation.

The parties in both of the above federal derivative lawsuits participated in a mediation held on September 24, 2018. The parties did not reach a settlement on the day of the mediation and negotiations are ongoing.

Capstone Turbine Corporation v. Regatta Solutions, Inc.

On August 23, 2018, the Company initiated arbitration proceedings against its former distributor, Regatta Solutions, Inc. (“Regatta”), with the American Arbitration Association, under the following caption: Capstone Turbine Corp. v. Regatta Solutions, Inc., Case No. 01-18-0003-0860 (the “Capstone-Regatta Arbitration”). The Company has alleged claims against Regatta for breach of contract and unjust enrichment relating to the parties’ prior distributor relationship, which terminated at the end of March of 2018, and the related wind-down agreement between the parties. As remedies for these claims, the Company is seeking compensatory, consequential, and punitive damages, along with declaratory relief and attorney’s fees, interest, and costs.

On October 18, 2018, Regatta filed its answer and cross-claims in the Capstone-Regatta Arbitration. In its cross-claims, Regatta has asserted claims for breach of contract, intentional interference with prospective economic advantage, fraud, and intentional interference with contractual relations, relating to the parties’ agreement to wind-down relations and Regatta’s purported sales efforts in California. As remedies for these alleged claims, Regatta is seeking no less than $1.5 million in general and compensatory damages, along with punitive and exemplary damages, as well as attorney’s fees and costs. The Company has filed and served an answering statement denying Regatta’s counterclaims and asserting several affirmative defenses.

Also on October 18, 2018, Regatta filed a lawsuit in the Superior Court of the State of California, County of Orange, alleging two counts of fraud, and one count of interference with contractual relations, individually against Mr. James Crouse, Executive Vice President of Sales for the Company, arising out of the same allegations made in Regatta’s counterclaim. As remedies for these alleged claims, Regatta again sought no less than $1.5 million in general and compensatory damages, along with punitive and exemplary damages, as well as attorney’s fees and costs. The case was filed under the caption Regatta Solutions, Inc., v. Jim Crouse, et. al., Case No. 30-2018-01026571-CU-FR-CJC. On December 14, 2018, Regatta stipulated and agreed to arbitrate its claims against Mr. James Crouse and dismissed him from the Superior Court action.

On January 16, 2019, the parties participated in a mediation that did not resolve the dispute. Settlement negotiations are ongoing. The parties are currently involved in the discovery process, and an evidentiary hearing in the Capstone-Regatta Arbitration is scheduled to begin June 18, 2019. The Company has not recorded any liability as of December 31, 2018, since any potential loss is not probable or reasonably estimable given the current status of the proceedings.

25


 

Table of Contents

Capstone Turbine Corporation v. Energy Systems, Inc.

On August 17, 2018, the Company initiated arbitration proceedings against its former distributor, Energy Systems of Caribbean, Inc. (“Energy Systems”) by seeking declaratory relief that its action in terminating the distributorship was justified under the law. The claim was filed with the American Arbitration Association under the following caption: Capstone Turbine Corp. v. Energy Systems of Caribbean, Inc., Case No. 01-18-0003-1307. As remedies for these claims, the Company is seeking declaratory relief and attorney’s fees, interest and costs.

On August 22, 2018, Energy Systems filed a claim against the Company in Puerto Rico alleging Breach of Distribution Contract under Law No. 75 of June 24, 1964, as amended, 10 l.p.r.a. §§ 278-278. The case was filed under the caption Energy Systems of Caribbean, Inc., v. Capstone Turbine Corporation, CIVIL NO. SJ2018cv06543 (904). As remedies for these alleged claims, Energy Systems seeks actual damages, injunctive relief, attorney’s fees and costs. This matter was subsequently removed to the United States District Court for the District of Puerto Rico based on diversity jurisdiction (Case No. 3:18-cv-01611). The parties have since stipulated to a stay of both the federal litigation and arbitration so that the parties may pursue settlement. The Company has not recorded any liability as of December 31, 2018 since any potential loss is not probable or reasonably estimable given the current status of the proceedings.

16.  Net Loss Per Common Share

Basic loss per share of common stock is computed using the weighted average number of common shares outstanding for the period. Diluted loss per share is computed without consideration to potentially dilutive instruments because the Company incurred losses in the three months ended December 31, 2018 which would make these instruments anti-dilutive. As of December 31, 2018 and 2017, the number of anti-dilutive stock options and restricted stock units excluded from diluted net loss per common share computations was approximately 2.6 million and 1.2 million, respectively. As of December 31, 2018, the number of PRSUs subject to performance conditions which have not been satisfied have been excluded from diluted net loss per common share computations was approximately 0.3 million.  There were no PRSUs outstanding as of December 31, 2017. As of December 31, 2018 and 2017, the number of warrants excluded from diluted net loss per common share computations was approximately 2.7 million and 8.5 million, respectively.

 

17. Subsequent Events

The Company has evaluated all subsequent events through the filing date of this Form 10-Q with the SEC, to ensure that this filing includes appropriate disclosure of events both recognized in the financial statements as of December 31, 2018, and events which occurred subsequently but were not recognized in the financial statements. Except as described below there were no other subsequent events which required recognition, adjustment to or disclosure in the financial statements.

On February 4, 2019 (the “Closing Date”), the Company entered into a Note Purchase Agreement (the “Note Purchase Agreement”), by and among the Company, certain subsidiaries of the Company party thereto as guarantors, Goldman Sachs Specialty Lending Holdings, Inc. and any other purchasers party thereto from time to time (collectively, the “Purchaser”) and Goldman Sachs Specialty Lending Holdings, Inc., as collateral agent, in connection with the sale of senior secured notes of the Company in a private placement exempt from registration under the Securities Act of 1933, as amended. Under the Note Purchase Agreement, the Company sold to the Purchaser $30.0 million aggregate principal amount of senior secured notes (the “Notes”), which bear interest at a rate of 13.0% per annum, computed on the basis of a 360-day year composed of twelve 30-day months, and payable quarterly on March 31, June 30, September 30 and December 31 of each year until maturity. The first interest payment on the Notes will be on March 31, 2019. The entire principal amount of the Notes is due and payable on February 4, 2022 (the “Maturity Date”). The Notes do not amortize and the entire principal balance is due in a single payment on the Maturity Date.

The Company maintained Bridge Bank Credit Agreements with Western Alliance Bank through Bridge Bank, with credit support provided by the Export-Import Bank of the United States through its working capital guarantee program, that provided the Company with a credit facility up to $15.0 million in the aggregate. On February 4, 2019, the Company used the net cash proceeds from the issuance of the Notes to pay in full its obligations under that certain Business Financing Agreement dated as of June 2, 2017 between the Company and Western Alliance Bank and to pay certain related fees, costs and expenses.

26


 

Table of Contents

 

 

 

 

27


 

Table of Contents

 

Item 2.  Management’s Discussion and Analysis of Financial Condition and Results of Operations

The following discussion should be read in conjunction with the condensed consolidated financial statements and notes included in this Form 10-Q and in our Annual Report on Form 10-K for Fiscal 2018. When used in this Form 10-Q, and in the following discussion, the words “believes”, “anticipates”, “intends”, “expects” and similar expressions are intended to identify forward-looking statements. Such statements are subject to certain risks and uncertainties which could cause actual results to differ materially from those projected. These risks include those under Risk Factors in our Annual Report on Form 10-K for Fiscal 2018 and in other reports we file with the Securities and Exchange Commission (“SEC”). Readers are cautioned not to place undue reliance on forward-looking statements, which speak only as of the date hereof. We assume no obligation to update any of the forward-looking statements contained herein after the filing of this Form 10-Q to conform such statements to actual results or changes in expectations except as may be required by law. All dollar amounts are approximate.

Overview

We are the market leader in microturbines based on the number of microturbines sold. Generally, power purchased from the electric utility grid is less costly than power produced by distributed generation technologies. Utilities may also charge fees to interconnect to their power grids. However, we can provide economic benefits to end users in instances where the waste heat from our microturbine has value (combined heat and power (“CHP”) and combined cooling, heat and power (“CCHP”)), where fuel costs are low (renewable energy/renewable fuels), where the costs of connecting to the grid may be high or impractical (such as remote power applications), where reliability and power quality are of critical importance, or in situations where peak shaving could be economically advantageous because of highly variable electricity prices. Our microturbines can be interconnected to other distributed energy resources to form “microgrids” (also called “distribution networks”) located within a specific geographic area and provide power to a group of buildings. Because our microturbines can provide a reliable source of power and can operate on multiple fuel sources, management believes they offer a level of flexibility not currently offered by other technologies such as reciprocating engines.

Our goals for Fiscal 2019 are to achieve EBITDA breakeven; significantly grow gross margin and revenue for our accessories, parts and service; strengthen our core market verticals, while diversifying into additional market verticals and geographies; and drive towards 100% aftermarket sales absorption. During the third quarter Fiscal 2019 our net loss was $3.5 million and our basic and diluted loss per share was $0.05 compared to $0.3 million and $0.01, respectively, in the same period of the previous year. The increase in the net loss during the third quarter of Fiscal 2019 was primarily because of lower revenue from microturbine products and higher warranty expense. Product revenue was primarily lower as a result of the deployment of approximately 3.6 megawatts of our C1000 Signature Series systems under our factory rental program. We build to a fixed number of production slots for our mircoturbines each quarter and during the third quarter of Fiscal 2019, we allocated four C1000 Signature Series systems production slots to our factory rental program. Our warranty provision negatively impacted our third quarter Fiscal 2019 net loss primarily because of a supplier defect that was identified during the first quarter of Fiscal 2019. Total service revenue increased 21% during the third quarter of Fiscal 2019 primarily because of revenue from our Distributor Support System (“DSS program”) and rental income from our factory rental program compared to the same period last year. The first nine months of Fiscal 2019 was characterized by growth of our aftermarket business on lower revenue from microturbine products. We also experienced strengthening of the natural resources market in the Latin America and Russian markets during the first nine months of Fiscal 2019. Additionally, although the U.S. dollar has somewhat weakened against other currencies, it continues to be an issue in select markets as the strong dollar makes our products more expensive in those markets, as we sell in U.S. dollars.  

Our products continue to gain interest in all six of the major vertical markets (energy efficiency, renewable energy, natural resources, critical power supply, microgrid and transportation). In the energy efficiency market, we continue to expand our market presence in hotels, office buildings, hospitals, retail and industrial applications globally. The renewable energy market is fueled by landfill gas, biodiesel, and biogas from sources such as food processing, agricultural waste and livestock manure. Our product sales in the oil and gas and other natural resources market is driven by our microturbines’ reliability, emissions profile and ease of installation. Given the volatility of the oil and gas market, our business strategy is to target projects within the energy efficiency and renewal energy markets. Although, we experienced revenue growth in the natural resources market during the third quarter of Fiscal 2019, which we believe was primarily because oil prices continued to be around $60.00 we continue to be impacted by the volatility of the global oil and gas markets and the ongoing global geopolitical tensions. We also continue to see interest in critical power

28


 

Table of Contents

supply applications as customers want solutions that can handle both primary and backup power. Transportation is a developing market segment for us and currently transportation products were only for customer demonstrations.

We continue to focus on improving our products based on customer input, building brand awareness and new channels to market by developing a diversified network of strategic distribution partners. Our focus is on products and solutions that provide near term opportunities to drive repeatable business rather than discrete projects for niche markets. In addition, management closely monitors operating expenses and strives to improve manufacturing efficiencies while simultaneously lowering direct material costs and increasing average selling prices. The key drivers to our success are revenue growth, higher average selling prices, lower direct material costs, positive new order flow and reduced cash usage.

An overview of our direction, targets and key initiatives are as follows:

1.

Focus on Vertical Markets Within the distributed generation markets that we serve, we focus on vertical markets that we identify as having the greatest near-term potential. In our primary products and applications (energy efficiency, renewable energy, natural resources, critical power supply, microgrid and transportation products), we identify specific targeted vertical market segments. Within each of these segments, we identify what we believe to be the critical factors to success and base our plans on those factors. Given the volatility of the oil and gas market, we have refocused our business strategy to target projects within the energy efficiency, renewable energy and microgrid markets.

The following table summarizes our product shipments by vertical markets:

 

 

 

 

 

 

 

 

 

 

 

 

Three Months Ended

 

Nine Months Ended

 

 

 

December 31,

 

December 31,

 

 

    

2018

    

2017

 

2018

    

2017

 

Energy efficiency

    

40%

 

32%

 

40%

 

50%

 

Natural resources

 

42%

 

60%

 

48%

 

40%

 

Renewable energy

 

12%

 

8%

 

8%

 

10%

 

Microgrid

 

6%

 

 —

 

4%

 

 —

 

Energy Efficiency—CHP/CCHP

Energy efficiency refers to the proper utilization of both electrical and thermal energies in the power production process. In such applications, our microturbines are able to maximize the availability of usable energy to provide a significant economic advantage to customers while reducing their onsite emissions. CHP and CCHP can improve site economics by capturing the waste heat created from a single combustion process to increase the efficiency of the total system, from approximately 30 percent to 80 percent or more. Compared with more traditional, independent generation sources, the increase in operational efficiency also reduces greenhouse gas emissions through the displacement of other separate systems, which can also reduce operating costs.

Natural Resources—Oil, Natural Gas, Shale Gas & Mining

Our microturbines are installed in the natural resource market for use in both onshore and offshore applications, including oil and gas exploration, production, and at compression and transmission sites as a highly efficient and reliable source of power.  In some cases, these oil and gas or mining operations have no electric utility grid and rely solely on power generated onsite. There are numerous locations, on a global scale, where the drilling, production, compression and transportation of natural resources and other extraction and production processes create fuel byproducts, which are traditionally burned or released into the atmosphere. Our microturbines can turn these fuel byproducts - flare gas, or associated gas, into a useable fuel to provide prime power to these sites.

Renewable Energy

There is a growing transition to renewable energy sources and technologies happening on a global scale. Our microturbines run efficiently on renewable fuels such as methane and other biogases from landfills, wastewater treatment facilities and other small biogas applications like food processing plants, livestock farms and

29


 

Table of Contents

agricultural waste operations. Microturbines can burn these renewable fuels with minimal emissions, thereby, and in some cases, avoiding the imposition of penalties incurred for pollution while simultaneously producing electricity from this “free” fuel source for use at the site or in the surrounding areas. Our microturbines have demonstrated effectiveness in these smaller applications and may outperform conventional combustion engines in some situations, including when the gas contains a high amount of sulfur.

Critical Power Supply

Because of the potentially catastrophic consequences of system failure, momentary or otherwise, certain high demand power users, including high technology, health care and information systems facilities require higher levels of reliability in their power generation service. To meet these customer requirements, traditional solutions utilize UPS to protect critical loads from power disturbances along with back-up diesel generators for extended outages. We offer an alternative solution that can both meet customer reliability requirements and reduce operating costs. We have seen continued development in the critical market segment as it relates to health care facilities.

Microgrid

Microgrid is a group of interconnected loads and distributed energy resources that act as a single controllable energy entity with respect to the grid. Distributed energy resources typically include other dual-mode microturbines, reciprocating engines, solar photovoltaic (PV), wind turbine, fuel cells and battery storage.  Microgrids can be connected to larger electricity grids; however, in the event of a widespread outage, the microgrid will disconnect from the main grid and continue to operate independently to maintain the electricity supply to the homes and businesses that are connected to the microgrid’s electricity network. Our microturbines have the ability to meet the needs of microgrid end-users by lowering their overall cost to operate and by providing a versatile dispatchable technology that is fuel flexible and scalable enough to fit a wide variety of applications. We have seen continued development in the microgrid market segment.

Transportation

Our technology is also used in hybrid electric vehicle (“HEV”) applications. Our customers have applied our products in HEV applications such as transit buses and Class 7 and 8 work trucks. In these applications, the microturbine acts as an onboard battery charger to recharge the battery system as needed. The benefits of microturbine-powered HEV hybrids include extended range, fuel economy gains, quieter operation, reduced emissions and higher reliability when compared with traditional internal combustion engines.

Our technology is also used in marine applications. Our customers have applied our products in the commercial vessel and luxury yacht market segments. The application for our marine products is for use as a ship auxiliary engine. In this application, the microturbines provide power to the vessel’s electrical loads and, in some cases, the vessel is able to utilize the exhaust energy to increase the overall efficiency of the application, thereby reducing overall fuel consumption and emissions. Another feasible application is similar to our HEV application where the vessel is driven by an electric propulsion system and the microturbine serves as an on board range extender.

Backlog

 

Net product orders were approximately $8.6 million and $7.2 million for the three months ended December 31, 2018 and 2017, respectively. Ending backlog was approximately $76.3 million at December 31, 2018 compared to $103.5 million at December 31, 2017. The gross book-to-bill ratio was 1.3:1 and 0.7:1 for the three months ended December 31, 2018 and 2017, respectively. Book-to-bill ratio is the ratio of new orders we received to units shipped and billed during a period.

During the first quarter of Fiscal 2019, we removed from product backlog orders related to Regatta Solutions, our former California distributor (“Regatta”) for approximately $3.8 million. This removal was the result of the reassignment of the California sales territory to Cal Microturbine, our new exclusive distribution partner in California.

30


 

Table of Contents

On October 13, 2017, we entered into an Accounts Receivable Assignment Agreement (the “Assignment Agreement”) and Promissory Note (the “Note”) with Turbine International, LLC (“TI”). 

Pursuant to the terms of the Assignment Agreement, we agreed to assign to TI the right, title and interest to receivables owed to us from BPC Engineering, our former Russian distributor (“BPC”), upon TI’s payment to us of $2.5 million in three payments by February 1, 2018. We received payments from TI of approximately $1.0 million under the Assignment Agreement during Fiscal 2018 which was recorded as bad debt recovery. The receivables owed to us from BPC had a balance of $5.3 million as of March 31, 2018, and this balance was fully reserved. As of March 31, 2018, the right, title and interest to the accounts receivables owed to us from BPC had not been assigned to TI, as TI had not yet made all payments as required under the Assignment Agreement by February 1, 2018.

In connection with the terms of the Note, we granted TI the sole distribution rights for our products and services in the Russian oil and gas sector. As a result of this appointment, TI agreed to pay us $3.8 million over a three-year period in 35 equal monthly installments starting in August 2018.

On October 13, 2017, we and Hispania Petroleum, S.A. (the “Guarantor”), entered into a Guaranty Agreement (the “Guaranty Agreement”) whereby the Guarantor guarantees TI’s obligations under the Agreement and Note. However, due to our limited business relationship with TI and the missed payments on the Assignment Agreement, we deferred recognition of the Assignment Agreement and Note until collectability is reasonably assured.   

On June 5, 2018, we entered into an amendment to the Assignment Agreement (the “Amended Assignment Agreement”) and the Note (the “Amended Note”) with TI. Pursuant to the terms of the Amended Assignment Agreement, the right, title and interest to receivables owed to us from BPC will be contingent upon TI’s payment to us of the remaining approximately $1.5 million in five payments by September 20, 2019. We collected approximately $0.4 million and $0.5 million from TI during the three and nine months ended December 31, 2018, under the terms of the Amended Assignment Agreement. Under the terms of the Amended Note, TI agreed to pay us $3.8 million over a three-year period in 13 equal quarterly installments starting in December 20, 2019.

Due to the above amendments, during the three months ended March 31, 2018 we removed product orders related to BPC from backlog for approximately $7.2 million. This removal was the result of product pricing that we no longer would honor. Additionally, during the three months ended December 31, 2018 and September 30, 2018 we removed product orders related to BPC from backlog for approximately $0.6 million and $10.6 million, respectively. This removal was the result of our continuous review of BPC related backlog with TI which resulted in us no longer honoring the product pricing. After removal of the foregoing orders, the remaining backlog related to BPC as of December 31, 2018 comprises up to approximately 39% of our total backlog. This remaining backlog related to BPC continues to be reviewed with TI and the other new distributors in the region, and they have the right to request delivery of those backlog orders if the associated projects proceed. Nonetheless, the remaining backlog related to BPC may be negatively impacted.

A portion of our backlog is concentrated in the international oil and gas market which may impact the overall timing of shipments or the conversion of backlog to revenue. The timing of the backlog is based on the requirement date indicated by our customers. However, based on historical experience, management expects that a significant portion of our backlog may not be shipped within the next 18 months. Additionally, the timing of shipments is subject to change based on several variables (including customer deposits, payments, availability of credit and customer delivery schedule changes), most of which are not in our control and can affect the timing of our revenue. As a result, management believes the book-to-bill ratio demonstrates the current demand for our products in the given period.

2.

Sales and Distribution Channels  We seek out distributors that have business experience and capabilities to support our growth plans in our targeted markets. A significant portion of our revenue is derived from sales to distributors who resell our products to end users. We have a total of 104 distributors, Original Equipment Manufacturers (“OEMs”) and national accounts. In the United States and Canada, we currently have 25 distributors, OEMs and national accounts. Outside of the United States and Canada, we currently have 79

31


 

Table of Contents

distributors, OEMs and national accounts. We continue to refine our distribution channels to address our specific targeted markets.

 

Effective January 1, 2018, we launched our Distributor Support System (“DSS program”) to provide additional support for distributor business development activities, customer lead generation, brand awareness and tailored marketing services for each of our major geography and market vertical. This new program is funded by our distributors and was developed to provide improved worldwide distributor training, sales efficiency, website development, company branding and provide funding for increased strategic marketing activities. See Note 13—Revenue Recognition for additional discussion of revenue recognition for this program.

 

3.

Service  We provide service primarily through our global distribution network. Together with our global distribution network, we offer a comprehensive FPP for a fixed annual fee to perform regularly scheduled and unscheduled maintenance as needed. We provide factory and on-site training to certify all personnel that are allowed to perform service on our microturbines. FPPs are generally paid quarterly in advance.

Our FPP backlog as of December 31, 2018 was approximately $72.8 million, which represents the value of the contractual agreement for FPP services that has not been earned and extends through Fiscal 2031. Our FPP backlog as of March 31, 2018 was approximately $75.6 million. Our FPP backlog as of December 31, 2017 was approximately $75.1 million. Additionally, we offer new and remanufactured parts through our global distribution network.

4.

Product Robustness and Life Cycle Maintenance Costs  We continue to invest in enhancements that relate to high performance and high reliability. An important element of our continued innovation and product strategy is to focus on the engineering of our product hardware and electronics to make them work together more effectively and deliver improved microturbine performance, reliability and low maintenance cost to our customers.

 

5.

New Product Development Our new product development is targeted specifically to meet the needs of our selected vertical markets. We expect that our existing product platforms, the C30, C65, C200 and C1000 Series microturbines, will be our foundational product lines for the foreseeable future. Our research and development project portfolio is centered on enhancing the features of these base products.

 

During the three months ended September 30, 2018, we received funding from the Department of Energy Technology Commercialization to refine Argonne National Laboratory’s (“Argonne”) high-efficiency, fast-charging and fast-discharging thermal energy-storage system (“TESS”) for use in CHP systems. The new Capstone CHP system will incorporate Argonne’s high-efficiency, fast-charging, and fast-discharging thermal energy system for waste heat recovery and reuse in projects that require process heat and industrial manufacturing environments. This new project focuses on integrating Argonne’s TESS into a C200 CHP system, specifically, using thermal modeling and simulations to optimize system design; fabricating and integrating the TESS into the C200 system; testing the performance of the integrated TESS-C200 CHP system and conducting both a technology and economic analysis to establish performance and cost benefits of the new integrated microturbine and thermal battery solution.

 

Our product development activities during Fiscal 2018 included the completion of the new family of PowerSync controllers used for Capstone microturbines. We also improved our C65 heat recovery module and launched a new cleanable severe environment air filtration system for our line of microturbine products. In addition, our product development activities during Fiscal 2018 included research in the certification for our C200S microturbine by Underwriters Laboratories Inc. (UL) to the latest UL 1741 interconnection standards that became effective in 2016.

 

We are also developing a more efficient microturbine CHP system with the support of the Department of Energy, which awarded us a grant of $5.0 million in support of this development program, of which $4.2 million was allocated to us and was used through September 30, 2015. We successfully completed the first phase of the development program on September 30, 2015 and achieved 270 kW with a prototype C250 microturbine in our development test lab. Management intends to continue with the next phase of development and commercialization after we achieve profitability. In Fiscal 2018, we completed the second phase of long-

32


 

Table of Contents

term endurance test. The next phase will be to continue development of the C250 product architecture as well as the associated power electronics and software controls required for successful commercialization.

 

6.

Cost and Core Competencies  We believe that the core competencies of our products are air bearing technology, advanced combustion technology and sophisticated power electronics to form efficient and ultra-low emission electricity and cooling and heat production systems. Our core intellectual property is contained within our air bearing technology. We continue to review avenues for cost reduction by sourcing to the best value supply chain option. In order to utilize manufacturing facilities and technology more effectively, we are focused on continuous improvements in manufacturing processes. Additionally, considerable effort is being directed to manufacturing cost reduction through process improvement, product design, advanced manufacturing technology, supply management and logistics. Management expects to be able to leverage our costs as product volumes increase.

 

Our manufacturing designs include the use of conventional technology, which has been proven in high volume automotive and turbocharger production for many years. Many components used in the manufacture of our products are readily fabricated from commonly available raw materials or off the shelf items available from multiple supply sources; however, certain items are custom made to meet our specifications that require longer lead time. We believe that in most cases, adequate capacity exists at our suppliers and that alternative sources of supply are available or could be developed within a reasonable period of time. However, single source suppliers with long lead times may be more challenging to transition to another supplier. We have an ongoing program to develop alternative back up suppliers for sole source parts wherever possible, however this has been challenging with low production volumes and increased pricing. We regularly reassess the adequacy and abilities of our suppliers to meet our future needs.

 

During the first quarter of Fiscal 2019, we identified a defect in one of the component parts for microturbine systems from one of our single source suppliers. As a result of this defect we have identified several new suppliers with greater engineering expertise and robust quality management systems. The transition is complex, lengthy and may result in an interruption in our manufacturing process. An interruption in our manufacturing process for this component part would adversely impact our results of operations.

 

During the fourth quarter of Fiscal 2018, we received notification from one of our single source suppliers that they were at maximum capacity and would require prepayment and a significant increase in the price of multiple components in order to fulfill our supply requirements for Fiscal 2019. Due to their capacity issues, it is uncertain if we will experience an interruption in parts from this supplier or be able to fully offset or recover any resulting component price increases. This could impact margins or sales in future quarters. During the first quarter of Fiscal 2019, we issued a prepayment of approximately $2.2 million to this single source supplier. As of December 31, 2018, there were gradual improvement trends in the capacity issues at the supplier. We are in the process of qualifying an additional supplier for these components and we expect this supplier to be qualified and transitioned by Fiscal 2020.

 

 

We believe that effective execution in each of these key areas will be necessary to leverage Capstone’s promising technology and early market leadership into achieving positive cash flow with growing market presence and improving financial performance. Based on our recent progress and assuming achievement of targeted cost reductions and product mix, pricing and performance and our increasing accessories, parts and service revenue with improved gross margins, our financial model indicates that we will achieve positive cash flow when we generate $25 million in quarterly revenue with a 20% gross margin. We expect to have costs increase in certain areas in Fiscal 2019, including sales and marketing, which if not offset by an increase in revenue, would reduce margins and profitability as we have limited ability to further reduce costs.

During the third quarter of Fiscal 2018, we consolidated our operations and offices into our Van Nuys location and we believe that our production capacity is approximately 2,000 units per year, depending on product mix. We believe we will be able to support this production capacity level by adding additional shifts, which would increase working capital requirements, and making some additional capital expenditures when necessary.

 

33


 

Table of Contents

Critical Accounting Policies and Estimates

 

The preparation of our condensed consolidated financial statements requires management to make estimates and assumptions that affect the reported amounts of assets, liabilities, revenue and expenses. Management believes the most complex and sensitive judgments, because of their significance to the condensed consolidated financial statements, result primarily from the need to make estimates about the effects of matters that are inherently uncertain. Actual results could differ from management’s estimates. Management believes the critical accounting policies listed below affect our more significant accounting judgments and estimates used in the preparation of the condensed consolidated financial statements. These policies are described in greater detail in our Annual Report on Form 10-K for Fiscal 2017 and continue to include the following areas:

 

·

Impairment of long-lived assets, including intangible assets with finite lives;

 

·

Inventory write-downs and classification of inventories;

·

Estimates of warranty obligations;

·

Accounts receivable allowances;

·

Deferred tax assets and valuation allowance; and

·

Stock-based compensation expense.

 

Except for the accounting policy for revenue recognition that was updated, as set forth above, as a result of adopting Accounting Standards Update No. 2014-09, Revenue from Contracts with Customers (Topic 606), there have been no changes to our significant accounting policies described in the Annual Report on Form 10-K for the Fiscal Year 2018 filed with the SEC on June 7, 2018, that have had a material impact on our condensed consolidated financial statements and related notes.

Results of Operations

Three Months Ended December 31, 2018 and 2017

 

The following table summarizes our revenue by geographic markets (amounts in millions):

 

 

 

 

 

 

 

 

 

 

Three Months Ended December 31,

 

 

 

2018

2017

 

 

    

Revenue

    

Revenue

 

United States and Canada

 

$

9.6

 

$

14.7

 

Europe and Russia

 

 

3.0

 

 

3.6

 

Latin America

 

 

2.8

 

 

2.0

 

Asia and Australia

 

 

2.6

 

 

2.4

 

Middle East and Africa

 

 

 —

 

 

0.1

 

Total

 

$

18.0

 

$

22.8

 

Revenue  Revenue for the three months ended December 31, 2018 decreased $4.8 million, or 21%, to $18.0 million from $22.8 million for the three months ended December 31, 2017.

The change in revenue for the three months ended December 31, 2018 compared to the three months ended December 31, 2017 included decreases in revenue of $5.1 million from the United States and Canadian markets, $0.6 million from the Europe and Russian markets and $0.1 million from the Middle East and African markets. These overall decreases in revenue were offset by increases in revenue of $0.8 million from the Latin America market and $0.2 million from the Asia and Australian markets. The decrease in revenue in the United States and Canadian markets during the three months ended December 31, 2018 compared to the same period last year was primarily because we deployed a large portion (approximately 3.6 megawatts) of our C1000 Signature Series systems shipments under our factory rental program and because we experienced certain microturbine parts delivery schedule changes. We build to a fixed number

34


 

Table of Contents

of production slots for our mircoturbines each quarter and during the three months ended December 31, 2018, we allocated four C1000 Signature Series systems production slots to our factory rental program, which resulted in lower product revenue compared to the same period the previous year. The decrease in revenue in the European and Russian markets was primarily because of a decrease in product shipments of our C30 systems into the energy efficiency market. Our revenue in the European and Russian markets continues to be negatively impacted by the ongoing geopolitical tensions in these regions and a strong U.S. dollar in certain markets making our products more expensive in such markets. The decrease in revenue in the Middle East and African markets was primarily the result of the ongoing geopolitical tensions in these regions and continues to be negatively impacted by the volatility of the global oil and gas markets. The increase in revenue in the Latin American market was primarily because of an increase in C200 and C1000 Signature Series systems shipments during the three months ended December 31, 2018 compared to the same period last year. The increase in revenue in the Asian and Australian markets was primarily because of an increase in accessories and parts shipments during the three months ended December 31, 2018 compared to the same period last year.

The following table summarizes our revenue (revenue amounts in millions):

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Three Months Ended December 31,

 

 

 

2018

 

2017

 

 

    

Revenue

    

Megawatts

    

Units

    

Revenue

    

Megawatts

    

Units

 

Microturbine Product

 

$

10.1

 

10.3

 

66

 

$

14.6

 

14.3

 

75

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Accessories and Parts

 

 

3.2

 

 

 

 

 

 

4.3

 

 

 

 

 

Service

 

 

4.7

 

 

 

 

 

 

3.9

 

 

 

 

 

Total Accessories, Parts and Service

 

 

7.9

 

 

 

 

 

 

8.2

 

 

 

 

 

Total

 

$

18.0

 

 

 

 

 

$

22.8

 

 

 

 

 

For the three months ended December 31, 2018, revenue from microturbine products decreased $4.5 million, or 31%, to $10.1 million from $14.6 million for the three months ended December 31, 2017.  The decrease in revenue and megawatts shipped was primarily because we deployed 3.6 megawatts of our C1000 Signature Series systems under our factory rental program and we sold a lower number of our C30 and C65 systems during the three months ended December 31, 2018 compared to the same period last year. Megawatts shipped was 10.3 megawatts and 14.3 megawatts during the three months ended December 31, 2018 and 2017, respectively. Average revenue per megawatt shipped was approximately $1.0 million during each of the three months ended December 31, 2018 and 2017. The timing of shipments is subject to change based on several variables (including customer deposits, payments, availability of credit and delivery schedule changes), most of which are not within our control and can affect the timing of our revenue.

For the three months ended December 31, 2018, revenue from our accessories and parts decreased $1.1 million, or 26%, to $3.2 million from $4.3 million for the three months ended December 31, 2017. The decrease in revenue from accessories and parts was primarily because of lower accessories shipments of our Organic Rankine Cycle (“ORC”) systems and certain microturbine parts delivery schedule changes.

Service revenue for the three months ended December 31, 2018 increased $0.8 million, or 21%, to $4.7 million from $3.9 million for the three months ended December 31, 2017. The increase in service revenue was because of increases in revenue from our Distributor Support System (“DSS program”), microturbine rental program and microturbine service work, offset by a decrease in revenue from FPP service agreements as a result of not recognizing revenue on certain service contracts because of the reassignment of those service contracts from Capstone’s legacy California distributor to Cal Microturbine. Effective January 1, 2018 we launched our DSS program to provide additional support for distributor business development, customer lead generation, brand awareness and tailored marketing services for each of our major geography and market vertical. This new program is funded by our distributors and was developed to provide improved worldwide distributor training, sales efficiency, website development, company branding and provide funding for increased strategic marketing activities. Earned revenue from our DSS program for the three months ended December 31, 2018 was $0.7 million and is included under the caption “Service revenue” in the accompanying condensed consolidated statements of operations.

Sales to E-Finity Distributed Generation, LLC (“E-Finity) and Cal Microturbine (“CAL”), two of our domestic distributors and DTC Soluciones Inmobiliarias S.A. de C.V., one of our Mexican distributors (“DTC”), accounted for 14%, 13% and 13%, respectively, of revenue for the three months ended December 31, 2018. Sales to E-Finity and CAL accounted for 29% and 14%, respectively, of revenue for the three months ended December 31, 2017.

35


 

Table of Contents

Gross Margin  Cost of goods sold includes direct material costs, production and service center labor and overhead, inventory charges and provision for estimated product warranty expenses. The gross margin was $2.2 million, or 12% of revenue, for the three months ended December 31, 2018 compared to a gross margin of $5.0 million, or 22% of revenue, for the three months ended December 31, 2017. The decrease in gross margin of $2.8 million during the three months ended December 31, 2018 compared to the three months ended December 31, 2017 was primarily because of a $2.1 million decrease in our direct material costs margin, increase in warranty expense of $1.1 million, and higher production and service center labor and overhead expense of $0.1 million, offset by decreases in inventory charges of $0.3 million and royalty expense of $0.2 million. In addition to consolidating our manufacturing processes into our Van Nuys location, management continues to implement initiatives to improve gross margin in Fiscal 2019 by further reducing manufacturing overhead and direct material costs, and improving product performance as we work to achieve profitability.

Direct material costs margin decreased $2.1 million during the three months ended December 31, 2018 compared to the three months ended December 31, 2017 primarily because of lower microturbine system shipments, increase in direct material costs and increase in FPP expenses associated with higher than normal levels of unscheduled maintenance activities.

Warranty expense is a combination of a standard warranty provision recorded at the time revenue is recognized and changes, if any, in estimates for reliability repair programs. Reliability repair programs are based upon estimates that are recorded in the period that new information becomes available, including design changes, cost of repair and product enhancements, which can include both in-warranty and out-of-warranty systems. The increase in warranty expense of $1.1 million during the three months ended December 31, 2018 compared to the three months ended December 31, 2017 was primarily because of an increase in our warranty provision as a result of a supplier defect identified during the first quarter of Fiscal 2019. In addition, the increase in warranty expense was because of the completion of a reliability repair program during the three months ended December 31, 2017. During the three months ended December 31, 2016, we recorded a one-time non-cash warranty provision of approximately $5.2 million to retrofit proactively select non-Signature Series C200 microturbines with the more robust new Signature Series generator components to improve product performance and reliability. The remaining non-cash warranty provision of approximately $0.6 million for this reliability repair program was reversed during the three months ended December 31, 2017 because the program was completed. Management expects warranty expense in Fiscal 2019 to be higher than in Fiscal 2018 primarily because of an increase in the standard warranty provision because of a supplier defect identified during the first quarter of Fiscal 2019.

Production and service center labor and overhead expense increased $0.1 million during the three months ended December 31, 2018 compared to the three months ended December 31, 2017 primarily because of an increase in depreciation expense of $0.2 million and increase in freight expense of $0.1 million, offset by a decrease in overhead allocated to finished goods inventory of $0.2 million.

Inventory charges decreased $0.3 million during the three months ended December 31, 2018 compared to the three months ended December 31, 2017 primarily as the result of a decrease in reserve for excess and obsolete inventory.

On July 25, 2018, we and Carrier entered into a Second Amendment to the Development and License Agreement (“Second Amendment”) whereby we agreed to pay Carrier approximately $3.0 million to conclude our current royalty obligation under the Development and License Agreement, dated as of September 4, 2007, as amended (“Development Agreement”) and release us from any future royalty payment obligations. The Second Amendment also removed non-compete provisions from the Development Agreement, allowing us to design, market or sell our C200 System in conjunction with any energy system and compete with Carrier products in the CCHP market. On September 19, 2018, we paid in full the negotiated royalty settlement of $3.0 million to Carrier, and as such, there is no further royalty obligation to Carrier. The prepaid royalty of $3.0 million has been recorded under the caption “Prepaid expenses and other current assets” in the accompanying condensed consolidated balance sheets and will be amortized in the accompanying condensed consolidated statement of operations over a 15-year amortization period through September 2033 using an effective royalty rate. The effective royalty rate is calculated as the prepaid royalty settlement divided by total projected C200 System units over the 15-year amortization period. Royalty expense decreased $0.2 million during the three months ended December 31, 2018 compared to the three months ended December 31, 2017 primarily because we concluded our royalty obligation under the Development Agreement.

36


 

Table of Contents

The following table summarizes our gross margin (in millions except percentages):

 

 

 

 

 

 

 

 

 

 

Three Months Ended December 31,

 

 

    

2018

    

2017

 

Gross Margin

 

 

 

 

 

 

 

Product

 

$

(0.6)

 

$

1.6

 

As a percentage of product revenue

 

 

(6)

%

 

11

%

 

 

 

 

 

 

 

 

Accessories, parts and service

 

$

2.8

 

$

3.4

 

As a percentage of accessories, parts and service revenue

 

 

36

%

 

42

%

 

 

 

 

 

 

 

 

Total Gross Margin

 

$

2.2

 

$

5.0

 

As a percentage of total revenue

 

 

12

%

 

22

%

The decrease in product gross margin during the three months ended December 31, 2018 compared to the three months ended December 31, 2017 was primarily because of lower microturbine product revenue, an increase in warranty expense, increase in direct material costs and a result of our fixed amount of overhead being allocated to fewer product shipments. Accessories, parts and service gross margin decreased during the three months ended December 31, 2018 compared to the three months ended December 31, 2017 primarily because of higher than normal levels of unscheduled maintenance activities primarily because of a supplier defect identified during the first quarter of Fiscal 2019.

Research and Development (“R&D”) Expenses R&D expenses for the three months ended December 31, 2018 decreased $0.1 million, or 10%, to $0.9 million from $1.0 million in the three months ended December 31, 2017, primarily because of a decrease in supplies expense. Management expects R&D expenses in Fiscal 2019 to be slightly higher than in Fiscal 2018 as a result of ongoing product development costs.

Selling, General, and Administrative (“SG&A”) Expenses  SG&A expenses for the three months ended December 31, 2018 increased $0.6 million, or 15%, to $4.6 million from $4.0 million for the three months ended December 31, 2017. The net increase in SG&A expenses was primarily because of increases of approximately $0.2 million in salaries expense, including non-cash stock based compensation expense and $0.1 million in professional services expense, including legal expenses. In addition, the increase in SG&A expenses resulted from lower bad debt recoveries by $0.3 million during the three months ended December 31, 2018 compared to the same period last year. Excluding the one-time Leadership Incentive Program and bad debt recovery recorded in Fiscal 2018, management expects SG&A expenses in Fiscal 2019 to be slightly higher than in Fiscal 2018 primarily as a result of increases in salaries expense, marketing expense, allocated costs for shared-services facilities expense and professional services, including legal and shareholder expenses.

Interest Expense  Interest expense was approximately $0.2 million during each of the three months ended December 31, 2018 and 2017, respectively. As of December 31, 2018, we had total debt of $10.7 million outstanding under the Bridge Bank credit facility.

Nine Months Ended December 31, 2018 and 2017

The following table summarizes our revenue by geographic markets (amounts in millions):

 

 

 

 

 

 

 

 

 

 

Nine Months Ended December 31,

 

 

 

2018

2017

 

 

    

Revenue

    

Revenue

 

United States and Canada

 

$

31.7

 

$

34.3

 

Europe and Russia

 

 

12.2

 

 

10.7

 

Latin America

 

 

8.2

 

 

4.8

 

Asia and Australia

 

 

7.0

 

 

8.9

 

Middle East and Africa

 

 

2.3

 

 

3.1

 

Total

 

$

61.4

 

$

61.8

 

Revenue  Revenue for the nine months ended December 31, 2018 decreased $0.4 million, or 1%, to $61.4 million from $61.8 million for the nine months ended December 31, 2017. The change in revenue for the nine months

37


 

Table of Contents

ended December 31, 2018 compared to the nine months ended December 31, 2017 included decreases in revenue of $2.6 million from the United States and Canadian markets, $1.9 million from the Asian and Australian markets and $0.8 million from the Middle East and African markets. These decreases in revenue were offset by increases in revenue of $3.4 million from the Latin American market and $1.5 million from the European and Russian markets. The decrease in revenue in the United States and Canadian markets during the nine months ended December 31, 2018 compared to the same period the previous year was primarily because we deployed a larger portion (approximately 3.6 megawatts) of our C1000 Signature Series systems shipments under our factory rental program and because we experienced certain microturbine parts delivery schedule changes. We build to a fixed number of production slots for our mircoturbines each quarter and during the nine months ended December 31, 2018, we allocated four C1000 Signature Series systems production slots to our factory rental program, which resulted in lower product revenue compared to the same period the previous year. The decrease in revenue in the Asian and Australian markets was primarily because of decreases in accessories and parts revenue and product shipments into the energy efficiency and renewable energy vertical markets during the nine months ended December 31, 2018 compared to the same period last year. The decrease in revenue in the Middle East and African markets was primarily the result of the shift in certain customers’ project timelines compared to the same period last year. Our revenue in the Middle East and African markets continues to be negatively impacted by the volatility of the global oil and gas markets and ongoing geopolitical tensions in these regions. The increase in revenue in the Latin American market was primarily because of an increase in C200 and C1000 Signature Series systems shipments into the natural resources market during the nine months ended December 31, 2018 compared to the same period last year. The increase in revenue in the European and Russian markets during the nine months ended December 31, 2018 compared to the same period last year was primarily because the European energy efficiency and renewable energy vertical markets continue to improve. While our revenue in the European and Russian markets continues to be negatively impacted by the ongoing geopolitical tensions and a strong U.S. dollar, our revenue from the Russian market increased 38% during the nine months ended December 31, 2018 compared to the same period last year primarily because of our strategic initiative to improve the diversification of our revenue, the improvement of sales from TI and additional revenue from new distributors in the Russian market.

However, our revenue in the European and Russian markets continues to be negatively impacted by the ongoing geopolitical tensions and a strong U.S. dollar in certain markets making our products more expensive in such markets.

The following table summarizes our revenue (revenue amounts in millions):

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Nine Months Ended December 31,

 

 

 

2018

 

2017

 

 

    

Revenue

    

Megawatts

    

Units

    

Revenue

    

Megawatts

    

Units

 

Microturbine Product

 

$

38.6

 

39.2

 

206

 

$

39.4

 

37.7

 

195

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Accessories and Parts

 

 

10.5

 

 

 

 

 

 

11.0

 

 

 

 

 

Service

 

 

12.3

 

 

 

 

 

 

11.4

 

 

 

 

 

Total Accessories, Parts and Service

 

 

22.8

 

 

 

 

 

 

22.4

 

 

 

 

 

Total

 

$

61.4

 

 

 

 

 

$

61.8

 

 

 

 

 

For the nine months ended December 31, 2018, revenue from microturbine products decreased $0.8 million, or 2%, to $38.6 million from $39.4 million for the nine months ended December 31, 2017. The decrease in revenue was primarily because of an unfavorable shift in product mix, as we shipped a higher number of our C30, C65 and C200 microturbine systems during the nine months ended December 31, 2018 compared to the same period last year. Revenue from microturbine products also decreased as a result of the shipment of 2.0 megawatts of remanufactured systems during the second quarter of Fiscal 2019. These systems had a lower selling price than the new systems. Megawatts shipped during the nine months ended December 31, 2018 increased 1.5 megawatts, or 4%, to 39.2 megawatts from 37.7 megawatts during the nine months ended December 31, 2017. Average revenue per megawatt shipped was approximately $1.0 million during each of the nine months ended December 31, 2018 and 2017. The timing of shipments is subject to change based on several variables (including customer deposits, payments, availability of credit and delivery schedule changes), most of which are not within our control and can affect the timing of our revenue.

For the nine months ended December 31, 2018, revenue from our accessories and parts decreased $0.5 million, or 5%, to $10.5 million from $11.0 million for the nine months ended December 31, 2017. The decrease in revenue from accessories and parts was primarily because of lower accessories shipments of our ORC systems and the timing of certain parts sales promotions.

38


 

Table of Contents

Service revenue for the nine months ended December 31, 2018 increased $0.9 million, or 8%, to $12.3 million from $11.4 million for the nine months ended December 31, 2017. The increase in service revenue was because of increases in revenue from our Distributor Support System (“DSS program”), microturbine rental program and microturbine service work, offset by a decrease in revenue from FPP service agreements. The decrease in FPP service revenue was primarily the result of not recognizing revenue on certain service contracts because of the reassignment of those service contracts from Capstone’s legacy California distributor to CAL. Earned revenue from our DSS program for the nine months ended December 31, 2018 was $1.2 million and included under the caption “Service revenue” in the accompanying condensed consolidated statements of operations.

For the nine months ended December 31, 2018, E-Finity accounted for 12% of revenue. For the nine months ended December 31, 2017, E-Finity and Horizon Power Systems (“Horizon”), one of the Company’s domestic distributors, accounted for 19% and 10% of revenue, respectively.

Gross Margin  Cost of goods sold includes direct material costs, production and service center labor and overhead, inventory charges and provision for estimated product warranty expenses. The gross margin was approximately $6.1 million, or 10% of revenue, for the nine months ended December 31, 2018 compared to a gross margin of $10.2 million, or 17% of revenue, for the nine months ended December 31, 2017. The decrease in gross margin of $4.1 million during the nine months ended December 31, 2018 compared to the nine months ended December 31, 2017 was primarily because of a $2.7 million decrease in our direct material costs margin, increase in warranty expense of $1.3 million and higher production and service center labor and overhead expense of $0.9 million, offset by lower royalty expense of $0.4 million and inventory charges of $0.4 million. In addition to consolidating our manufacturing processes into our Van Nuys location, management continues to implement initiatives to improve gross margin in Fiscal 2019 by further reducing manufacturing overhead and direct material costs, and improving product performance as we work to achieve profitability.

Direct material costs margin decreased $2.7 million during the nine months ended December 31, 2018 compared to the nine months ended December 31, 2017 primarily because of an increase in direct material costs, lower selling price of two C1000 refurbished systems and increase in FPP expenses associated with higher than normal levels of unscheduled maintenance activities.

The increase in warranty expense of $1.3 million during the nine months ended December 31, 2018 compared to the nine months ended December 31, 2017 was primarily because of an increase in our warranty provision as a result of a supplier defect identified during the first quarter of Fiscal 2019. In addition, the increase in warranty expense during the nine months ended December 31, 2018 was because of the completion of a reliability repair program during the nine months ended December 31, 2017. During the nine months ended December 31, 2016, we recorded a one-time non-cash warranty provision of approximately $5.2 million to retrofit proactively select non-Signature Series C200 microturbines with the more robust new Signature Series generator components to improve product performance and reliability. The remaining non-cash warranty provision of approximately $0.6 million for this reliability repair program was reversed during the nine months ended December 31, 2017 because the program was completed. Management expects warranty expense in Fiscal 2019 to be higher than in Fiscal 2018 primarily because of an increase in the standard warranty provision as a result of a supplier defect identified during the first quarter of Fiscal 2019.

Production and service center labor and overhead expense increased $0.9 million during the nine months ended December 31, 2018 compared to the nine months ended December 31, 2017 primarily because of increases of approximately $0.5 million in consulting expense, $0.3 million in overhead allocated to finished goods inventory, $0.2 million in supplies expense and $0.1 million in allocated costs for shared-services facilities expense, offset by a decrease of $0.2 million in salaries expense.

On July 25, 2018, we and Carrier entered into a Second Amendment whereby we agreed to pay Carrier approximately $3.0 million to conclude our current royalty obligation under the Development Agreement and release us from any future royalty payment obligations. The Second Amendment also removed non-compete provisions from the Development Agreement, allowing us to design, market or sell our C200 System in conjunction with any energy system and compete with Carrier products in the CCHP market. On September 19, 2018, we paid in full the negotiated royalty settlement of $3.0 million to Carrier, and as such, there is no further royalty obligation to Carrier. The prepaid royalty of $3.0 million has been recorded under the captions “Prepaid expenses and other current assets” and “Other assets” in the accompanying condensed consolidated balance sheets and will be amortized in the accompanying condensed consolidated statement of operations over a 15-year amortization period through September 2033 using an effective

39


 

Table of Contents

royalty rate. The effective royalty rate is calculated as the prepaid royalty settlement divided by total projected C200 System units over the 15-year amortization period. Royalty expense decreased $0.4 million during the nine months ended December 31, 2018 compared to the nine months ended December 31, 2017 primarily because we concluded our royalty obligation under the Development Agreement.

Inventory charges decreased $0.4 million during the nine months ended December 31, 2018 compared to the nine months ended December 31, 2017 primarily as the result of a decrease in scrap material.

The following table summarizes our gross margin (in millions except percentages):

 

 

 

 

 

 

 

 

 

 

 

Nine Months Ended December 31,

 

 

 

    

2018

    

2017

 

 

Gross Margin

 

 

 

 

 

 

 

 

Product

 

$

(0.2)

 

$

2.5

 

 

As a percentage of product revenue

 

 

(1)

%

 

6

%

 

 

 

 

 

 

 

 

 

 

Accessories, parts and service

 

$

6.3

 

$

7.7

 

 

As a percentage of accessories, parts and service revenue

 

 

28

%

 

34

%

 

 

 

 

 

 

 

 

 

 

Total Gross Margin

 

$

6.1

 

$

10.2

 

 

As a percentage of total revenue

 

 

10

%

 

17

%

 

The decrease in product gross margin during the nine months ended December 31, 2018 compared to the nine months ended December 31, 2017 was primarily because of an increase in warranty expense, lower selling price of two C1000 refurbished systems and an increase in direct material costs. Accessories, parts and service gross margin decreased during the nine months ended December 31, 2018 compared to the nine months ended December 31, 2017 primarily the result of not recognizing revenue on certain service contracts because of the reassignment of those service contracts from Capstone’s legacy California distributor to Cal Microturbine. In addition, the accessories, parts and service margin decreased because of higher than normal levels of scheduled and unscheduled maintenance activities primarily as a result of a supplier defect identified during the first quarter of Fiscal 2019.

R&D Expenses R&D expenses for the nine months ended December 31, 2018 decreased $0.5 million, or 16%, to $2.7 million from $3.2 million in the nine months ended December 31, 2017. The overall decrease in R&D expenses of approximately $0.5 million resulted from decreases in salaries expense of approximately $0.5 million, supplies expense of $0.1 million and allocated costs for shared-services facilities expense of $0.1 million, offset by an increase in consulting expense of approximately $0.2 million during the nine months ended December 31, 2018 compared to the same period last year. Management expects R&D expenses in Fiscal 2019 to be slightly higher than in Fiscal 2018 as a result of ongoing product development costs.

SG&A Expenses  SG&A expenses for the nine months ended December 31, 2018 increased $1.7 million, or 12%, to $15.5 million from $13.8 million for the nine months ended December 31, 2017. The net increase in SG&A expenses was comprised of increases of approximately $0.4 million in allocated costs for shared-services facilities expense, $0.4 million in salaries expense, including non-cash stock-based compensation expense, $0.2 million in marketing expense, $0.2 million in professional services expense, including legal expenses and $0.2 million in business travel expense. In addition, the increase in SG&A expense resulted from bad recoveries was lower by $0.4 million during the nine months ended December 31, 2018 compared to the same period last year. Excluding the one-time Leadership Incentive Program and bad debt recovery recorded in Fiscal 2018, management expects SG&A expenses in Fiscal 2019 to be slightly higher than in Fiscal 2018 primarily as a result of increases in salaries expense, marketing expense, allocated costs for shared-services facilities expense and professional services, including legal and shareholder expenses.

Interest Expense  Interest expense was $0.5 million during each of the nine months ended December 31, 2018 and 2017. As of December 31, 2018, we had total debt of $10.7 million outstanding under the credit facility.

40


 

Table of Contents

Liquidity and Capital Resources

Our cash requirements depend on many factors, including the execution of our plan. We expect to continue to devote substantial capital resources to running our business and implementing the strategic changes summarized herein. Our planned capital expenditures for the year ending March 31, 2019 include approximately $1.0 million for plant and equipment costs related to manufacturing and operations. During the three months ended December 31, 2018, we deployed approximately $2.6 million of our C1000 Signature Series systems under our factory rental program. We have invested our cash in institutional funds that invest in high quality short term money market instruments to provide liquidity for operations and for capital preservation.

Our cash, cash equivalents and restricted cash balances decreased $2.7 million during the nine months ended December 31, 2018, compared to a decrease of $3.2 million during the nine months ended December 31, 2017. The decrease in cash, cash equivalents and restricted cash during the nine months ended December 31, 2018 compared to the same period last year was because of higher proceeds from the issuance of common stock through the at-the-money offering program as described below, offset by higher cash used in operating activities and cash used for rental assets.

Operating Activities  During the nine months ended December 31, 2018, we used $12.6 million in cash in our operating activities, which consisted of a net loss for the period of $12.7 million and cash used for working capital of $3.9 million, offset by non-cash adjustments (primarily warranty provision, accounts receivable allowances, depreciation and amortization, stock based compensation and inventory provision) of $4.0 million. During the nine months ended December 31, 2017, we used $9.2 million in cash in our operating activities, which consisted of a net loss for the period of $8.1 million and cash used for working capital of $4.2 million, offset by non-cash adjustments of $3.1 million.

The following is a summary of the significant sources (uses) of cash from operating activities (amounts in thousands):

 

 

 

 

 

 

 

 

 

 

 

Nine Months Ended December 31,

 

 

    

2018

    

2017

 

Net loss

    

$

(12,704)

    

$

(8,083)

 

Non-cash operating activities(1)

 

 

4,032

 

 

3,063

 

Changes in operating assets and liabilities:

 

 

 

 

 

 

 

Accounts receivable

 

 

3,088

 

 

1,697

 

Inventories

 

 

(3,401)

 

 

(791)

 

Accounts payable and accrued expenses

 

 

2,185

 

 

(1,769)

 

Prepaid expenses, other current assets and other assets

 

 

(3,821)

 

 

(252)

 

Other changes in operating assets and liabilities

 

 

(1,976)

 

 

(3,033)

 

Net cash used in operating activities

 

$

(12,597)

 

$

(9,168)

 


(1)

Represents change in warrant valuation, warranty provision, depreciation and amortization, stock-based compensation expense, inventory provision and accounts receivable allowances.

 

The change in non-cash operating activities during the nine months ended December 31, 2018 compared to the same period the previous fiscal year was primarily because of the provision for warranty expenses during the nine months ended December 31, 2018 primarily as a result of a supplier defect identified during the first quarter of Fiscal 2019. The change in accounts receivable during the nine months ended December 31, 2018 was primarily the result of lower revenue in the third quarter of Fiscal 2019 compared to the same period the previous year. The change in inventory was primarily the result of an increase in raw materials and finished goods during the nine months ended December 31, 2018 compared to the nine months ended December 31, 2017. The change in accounts payable and accrued expenses was primarily the result of the level of inventory receipts and timing of payments made by us during the nine months ended December 31, 2018 compared to the same period the previous fiscal year. The change in prepaid expenses, other current assets and other liabilities during the nine months ended December 31, 2018 was primarily because of a negotiated royalty settlement to Carrier and a supplier prepayment obligation, each described below. The change in other operating assets and liabilities during the nine months ended December 31, 2017 was primarily the result of warranty payments for the proactive retrofit of certain non-Signature Series C200 microturbines and this warranty program was completed during the three months ended December 31, 2017. 

41


 

Table of Contents

On July 25, 2018, we and Carrier entered into a Second Amendment whereby we agreed to pay Carrier approximately $3.0 million to conclude our current royalty obligation under the Development Agreement and release us from any future royalty payment obligations. The Second Amendment also removed non-compete provisions from the Development Agreement, allowing us to design, market or sell our C200 System in conjunction with any energy system and compete with Carrier products in the CCHP market. On September 19, 2018, we paid in full the negotiated royalty settlement agreement of $3.0 million to Carrier, as such there is no further royalty obligation to Carrier.

During the three months ended March 31, 2018, we received notification from one of our single source suppliers that they were at maximum capacity and would require prepayment and a significant increase in the price of multiple components in order to fulfill our supply requirements for Fiscal 2019. During the nine months ended December 31, 2018 we issued a prepayment of approximately $2.2 million to this single source supplier.

Investing Activities  Net cash used in investing activities of $3.1 million and $1.4 million during the nine months ended December 31, 2018 and 2017, respectively, relates primarily to the acquisition of fixed assets, rental units and leasehold improvements made to our Van Nuys location, respectively. During the three months ended December 31, 2018, we deployed approximately $2.6 million of our C1000 Signature Series systems under our factory rental program. During the fiscal year ended March 31, 2018, we consolidated our operations and offices into our Van Nuys, California location from our Chatsworth, California location.

Financing Activities During the nine months ended December 31, 2018, we generated approximately $12.9 million in financing activities compared to cash generated during the nine months ended December 31, 2017 of approximately $7.4 million. The funds generated from financing activities during the nine months ended December 31, 2018 were primarily the result of proceeds from the at-the-market offering program described below and net proceeds from our credit facility, offset by repayment of notes payable and capital lease obligations. The funds generated from financing activities during the nine months ended December 31, 2017 were primarily the result of proceeds from the October 2017 exercise of warrants and the at-the-market offering program described below, offset by net repayments under the credit facility and the repayment of notes payable and capital lease obligations.

On June 7, 2018, we entered into a sales agreement with H.C. Wainwright & Co., LLC with respect to an at-the-market offering program pursuant to which we may offer and sell, from time to time at our sole discretion, shares of our common stock, having an aggregate offering price of up to $25.0 million. We will set the parameters for sales of the shares, including the number to be sold, the time period during which sales are requested to be made, any limitation on the number that may be sold in one trading day and any minimum price below which sales may not be made. During the three months ended December 31, 2018, we issued 3.9 million shares of our common stock under this at-the-market offering program and the net proceeds to us from the sale of our common stock were approximately $2.9 million after deducting commissions paid of approximately $0.1 million. During the nine months ended December 31, 2018, we issued 7.6 million shares of our common stock under this at-the-market offering program and the net proceeds to us from the sale of our common stock were approximately $6.9 million after deducting commissions paid of approximately $0.2 million. As of December 31, 2018, approximately $17.8 million remained available for issuance with respect to this at-the-market offering program.

On April 13, 2018, a warrant holder exercised its rights to the warrant agreement to exercise on a cashless basis 5,760,000 Series A warrants at an exercise price of $0.60 per share under the warrant agreement. In accordance with terms of the warrant agreement, after taking into account the shares withheld to satisfy the cashless exercise option, the Company issued 3,806,243 shares of common stock.

Effective August 28, 2015, we entered into a sales agreement with Cowen and Company, LLC with respect to an at-the-market offering program pursuant to which we offered and sold, from time to time at our sole discretion, shares of our common stock, having an aggregate offering price of up to $30.0 million. During the nine months ended December 31, 2018, we issued 2.8 million shares of our common stock under the at-the-market offering program and the net proceeds to us from the sale of our common stock were approximately $4.0 million after deducting commissions paid of approximately $0.1 million. As of December 31, 2018, 26.0 million shares of our common stock were cumulatively sold pursuant to the at-the-market offering program and the net proceeds to us from the sale of the common stock were approximately $28.6 million after deducting commissions paid of approximately $0.8 million. This at-the-market offering program expired on May 29, 2018.

42


 

Table of Contents

There were no stock options exercised during the nine months ended December 31, 2018 and 2017, respectively. Repurchases of shares of our common stock for employee taxes due on vesting of restricted stock units, net of employee stock purchases, resulted in approximately $73,000 and $22,000 of net cash used during the nine months ended December 31, 2018 and 2017, respectively.

Credit Facility  The Company maintains Bridge Bank Credit Agreements with Western Alliance Bank through Bridge Bank, with credit support provided by the Export-Import Bank of the United States through its working capital guarantee program. Under the terms of the Bridge Bank Credit Agreements, the Company may borrow up to $15.0 million on a revolving basis depending on, among other factors, the amount of its eligible inventory and accounts receivable. The Bridge Bank Credit Agreements will terminate in accordance with their terms on June 2, 2021.

On June 1, 2018, the Company entered into a letter agreement (the “Letter Agreement”) with Bridge Bank. The Letter Agreement extended the maturity date under the Company’s Bridge Bank Credit Agreements from June 2, 2019 to June 2, 2021. The Letter Agreement increased the line of credit to an amount up to $15.0 million from $12.0 million. Additionally, the Letter Agreement reduced the per annum interest rate from prime rate plus 1.50 percent to 1.00 percent; the facility fee from 0.625% to 0.5%, and the cash collateral held at Bridge Bank from 42% to 40%, which is $6.0 million of the $15.0 million facility, as well as no fee for early termination.

Total borrowings, letter of credit obligations and the then aggregate committed amount of cash management services under the Bridge Bank Credit Agreements may not exceed 85% of the sum of unrestricted cash and the amount of cash collateral held at Bridge Bank. As a condition of the Bridge Bank Credit Agreements, the Company has restricted $6.0 million of cash equivalents as additional security for the credit facility. Borrowings under the Bridge Bank Credit Agreements will bear per annum interest at the prime rate plus 1.0 percent, subject to increase during the occurrence of an event of default. Obligations under the Bridge Bank Credit Agreements are secured by all of the Company’s assets, including intellectual property and general intangibles.

The Bridge Bank Credit Agreements include affirmative covenants as well as negative covenants that prohibit a variety of actions without Bridge Bank’s consent, including covenants that limit the Company’s ability to (a) incur or guarantee debt, (b) create liens, (c) enter into any merger, recapitalization or similar transaction or purchase all or substantially all of the assets or stock of another entity or (d) sell, assign, transfer or otherwise dispose of the Company’s assets. 

The financial covenants of the domestic credit agreement with Bridge Bank (the “Domestic Facility”), which is included in the Bridge Bank Credit Agreements, requires the Company not to exceed specified levels of losses relative to its financial model and the outstanding line of credit advances may not exceed 85% of the sum of unrestricted cash and the amount of cash collateral held at Bridge Bank. The Domestic Facility also defines an event of default to include a material adverse effect on the Company’s business. An event of default for this or any other reason, if not waived, could have a material adverse effect on the Company. As of December 31, 2018 we were in compliance with the covenants contained in the Bridge Bank Credit Agreements for Fiscal 2019.  Upon closing with the Purchaser and Goldman Sachs Specialty Lending Holdings, Inc., our existing credit facilities with Bridge Bank were paid off in full.

Working Capital Cash used for working capital was $3.9 million and $4.2 million during the nine months ended December 31, 2018 and 2017, respectively. Our working capital requirements during the nine months ended December 31, 2018 included a $3.0 million negotiated royalty settlement agreement payment to Carrier, $2.2 million in prepayments to one of our single source suppliers that notified us that they were at maximum capacity and would require prepayment and a significant increase in the price of multiple components in order to fulfill our supply requirements for Fiscal 2019, and a pay down of accrued expenses of $1.0 million with respect to our one-time leadership incentive program compensation.

On February 4, 2019 (the “Closing Date”), we entered into a Note Purchase Agreement (the “Note Purchase Agreement”), by and among us, certain subsidiaries of us party thereto as guarantors, Goldman Sachs Specialty Lending Holdings, Inc. and any other purchasers party thereto from time to time (collectively, the “Purchaser”) and Goldman Sachs Specialty Lending Holdings, Inc., as collateral agent, in connection with the sale of senior secured notes of us in a private placement exempt from registration under the Securities Act of 1933, as amended. Under the Note Purchase Agreement, we sold to the Purchaser $30.0 million aggregate principal amount of senior secured notes (the “Notes”), which bear interest at a rate of 13.0% per annum, computed on the basis of a 360-day year composed of twelve 30-day months, and payable quarterly on March 31, June 30, September 30 and December 31 of each year until maturity. The

43


 

Table of Contents

first interest payment on the Notes will be on March 31, 2019. The entire principal amount of the Notes is due and payable on February 4, 2022 (the “Maturity Date”). The Notes do not amortize and the entire principal balance is due in a single payment on the Maturity Date.

We maintained Bridge Bank Credit Agreements with Western Alliance Bank through Bridge Bank, with credit support provided by the Export-Import Bank of the United States through its working capital guarantee program, that provided us with a credit facility up to $15.0 million in the aggregate. On February 4, 2019, we used the net cash proceeds from the issuance of the Notes to pay in full its obligations under that certain Business Financing Agreement dated as of June 2, 2017 between us and Western Alliance Bank and to pay certain related fees, costs and expenses.

Evaluation of Ability to Maintain Current Level of Operations In connection with preparing the consolidated financial statements for the third quarter of Fiscal 2019, management evaluated whether there were conditions and events, considered in the aggregate, that raised substantial doubt about our ability to meet our obligations as they became due for the next twelve months from the date of issuance of our third quarter of Fiscal 2019 interim condensed consolidated financial statements. Management assessed that there were such conditions and events, including a history of recurring operating losses, negative cash flows from operating activities, the continued negative impact by the volatility of the global oil and gas markets, a strong U.S. dollar in certain markets making our products more expensive in such markets and ongoing global geopolitical tensions. We incurred a net loss of $3.5 million and used cash in operating activities of $2,000 for the third quarter of Fiscal 2019. Our working capital requirements during the third quarter of Fiscal 2019 were in line with management’s expectations, which included cash received from TI of approximately $0.4 million and deployment of approximately $2.6 million of our C1000 Signature Series systems under our factory rental program. The Company’s net loss expanded during the third quarter of Fiscal 2019 primarily because of lower revenue and an increase in our warranty provision as a result of a supplier defect identified during the first quarter of Fiscal 2019. As of December 31, 2018, we had cash, cash equivalents and restricted cash of $16.7 million, and outstanding borrowings under our credit facility of $10.7 million.

Management evaluated these conditions in relation to our ability to meet our obligations as they become due. Our ability to continue current operations and to execute on management’s plan is dependent on our ability to generate cash flows from operations. Management believes that we will continue to make progress on our path to profitability by continuing to maintain low operating expenses and develop our geographical and vertical markets. We may seek to raise funds by selling additional securities (through at-the-market offering or otherwise) or by obtaining additional debt financing. There is no assurance that we will be able to obtain additional funds on commercially favorable terms or at all. If we raise additional funds by issuing additional equity or convertible debt securities, the fully diluted ownership percentages of existing stockholders will be reduced. In addition, any equity or debt securities that we would issue may have rights, preferences or privileges senior to those of the holders of our common stock. 

Based on our current operating plan, management anticipates that, given current working capital levels, current financial projections and funds received under the Notes Purchase Agreement, we will be able to meet our financial obligations as they become due over the next twelve months from the date of issuance of our third quarter of Fiscal 2019 financial statements.

Depending on the timing of our future sales and collection of related receivables, managing inventory costs and the timing of inventory purchases and deliveries required to fulfill the backlog, our future capital requirements may vary materially from those now planned. The amount of capital that we will need in the future will require us to achieve significantly increased sales volume which is dependent on many factors, including:

·

the market acceptance of our products and services;

 

·

our business, product and capital expenditure plans;

 

·

capital improvements to new and existing facilities;

 

·

our competitors’ response to our products and services;

 

·

our relationships with customers, distributors, dealers and project resellers; and

 

·

our customers’ ability to afford and/or finance our products.

44


 

Table of Contents

 

Our accounts receivable balance, net of allowances, was $13.3 million and $16.0 million as of December 31, 2018 and March 31, 2018, respectively. Days sales outstanding in accounts receivable, (“DSO”), increased by 4 days to 68 days as of December 31, 2018 compared to 64 days as of December 31, 2017. The increase in our DSO was primarily because of a delay in a specific customer accounts receivable. We recorded net bad debt recoveries of approximately $0.3 million and $0.8 million for the nine months ended December 31, 2018 and 2017, respectively.

No assurance can be given that future bad debt expense will not increase above current operating levels. Increased bad debt expense or delays in collecting accounts receivable could have a material adverse effect on cash flows and results of operations. In addition, our ability to access the capital markets may be severely restricted or made very expensive at a time when we need, or would like, to do so, which could have a material adverse impact on our liquidity and financial resources. Certain industries in which our customers do business and certain geographic areas have been and could continue to be adversely affected by the previously referenced economic and geopolitical considerations.

New Accounting Pronouncements

Adopted

In May 2014, the Financial Accounting Standards Board (“FASB”) issued ASU, 2014-09, Revenue from Contracts with Customers (Topic 606), (“ASU 2014-09”). ASU 2014-09 outlines a single, comprehensive model for accounting for revenue from contracts with customers and requires more detailed disclosure to enable users of financial statements to understand the nature, amount, timing and uncertainty of revenue and cash flows arising from such contracts. ASU 2014-09 provides a five-step analysis of transactions to determine when and how revenue is recognized. The core principle is that a company should recognize revenue to depict the transfer of promised goods or services to customers in an amount that reflects the consideration to which the entity expects to be entitled in exchange for those goods and services. On April 1, 2018, we adopted ASU 2014-09 under the modified retrospective transition method. This method was applied to contracts that were not complete as of the date of initial application of ASU 2014-09.

During the first quarter of Fiscal 2019, we recognized revenue based on ASU 2014-09, however revenue for the first quarter of Fiscal 2018 was recognized based on Accounting Standards Codification, Topic 605, Revenue Recognition. See Note 13—Revenue Recognition for additional discussion of the impact of the adoption of ASU 2014-09.

On December 22, 2017, the SEC issued guidance under Staff Accounting Bulletin No. 118, Income Tax Accounting Implications of the Tax Cuts and Jobs Act (“SAB 118”) directing taxpayers to consider the impact of the U.S. legislation as “provisional” when it does not have the necessary information available, prepared or analyzed (including computations) in reasonable detail to complete its accounting for the change in tax law. As of December 31, 2018, upon completing its analysis, we believe that the amount booked as provisional in our financial statements as of March 31, 2018 under SAB 118 is final.

Not yet adopted

On August 17, 2018, the SEC issued Release No. 33-10532, “Disclosure Update and Simplification”, (“Release No. 33-10532”) which amends certain redundant, duplicative, outdated, superseded or overlapping disclosure requirements. The amendments in this rule are intended to facilitate the disclosure of information to investors and to simplify compliance without significantly impacting the mix of information provided to investors. The amendments also expand the disclosure requirements regarding the analysis of stockholders’ equity for interim financial statements, in which entities will be required to present a reconciliation for each period for which a statement of comprehensive income is required to be filed. The final rule became effective on November 5, 2018, however the SEC announced that it would not object if a filer’s first presentation of the changes in stockholders’ equity were included in its Form 10-Q for the quarter that begins after the effective date of the amendments. We are currently evaluating the impact of Release No. 33-10532 on our consolidated financial position and results of operations.

On June 2018, the FASB issued ASU 2018-07, “Shared-Based Payment Arrangements with Nonemployees” (Topic 505), (“ASU 2018-07”). ASU 2018-07 simplifies the accounting for share-based payments granted to nonemployees for goods and services. Under ASU 2018-07, most of the guidance on such payments to nonemployees

45


 

Table of Contents

will be aligned with the requirements for share-based payments granted to employees. Under the ASU 2018-07, the measurement of equity-classified nonemployee share-based payments will be fixed on the grant date, as defined in ASC 718, and will use the term nonemployee vesting period, rather than requisite service period. The amendments in this update are effective for fiscal years beginning after December 15, 2018, including interim periods within those fiscal years. Early adoption is permitted if financial statements have not yet been issued. We are currently evaluating the impact of ASU 2018-07 on our consolidated financial position and results of operations.

In February 2016, the FASB issued ASU 2016-02, Leases (Topic 842), (“ASU 2016-02”). The purpose of ASU 2016-02 is to provide financial statement users a better understanding of the amount, timing, and uncertainty of cash flows arising from leases. The adoption of ASU 2016-02 will result in the recognition of a right-of-use asset and a lease liability for most operating leases. New disclosure requirements include qualitative and quantitative information about the amounts recorded in the financial statements. In September 2017, the FASB issued ASU 2017-13, Revenue Recognition (Topic 605), Revenue from Contracts with Customers (Topic 606), Leases (Topic 840), and Leases (Topic 842), which provides additional implementation guidance on the previously issued ASU 2016-02 Leases (Topic 842). ASU 2016-02 requires a lessee to recognize assets and liabilities on the balance sheet for leases with lease terms greater than 12 months. ASU 2016-02 is effective for fiscal years beginning after December 15, 2018. ASU 2016-02 requires a modified retrospective transition by means of a cumulative-effect adjustment to retained earnings as of the beginning of the fiscal year in which the guidance is effective with the option to elect certain practical expedients. Early adoption is permitted. We are currently evaluating the impact of ASU 2016-02 on our consolidated financial position and results of operations.

Off-Balance Sheet Arrangements

We did not have during the periods presented, and we do not currently have, any off balance sheet arrangements, as defined under SEC rules.

 

Item 3.  Quantitative and Qualitative Disclosures About Market Risk

No material changes have occurred in our quantitative and qualitative market risk disclosure as presented in our Annual Report on Form 10-K for Fiscal 2018.

 

Item 4.  Controls and Procedures

Evaluation of Disclosure Controls and Procedures

Under the supervision and with the participation of our management, including the Chief Executive Officer and Chief Financial Officer, we have evaluated the effectiveness of the design and operation of our disclosure controls and procedures, as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended (the “Exchange Act”), as of the end of the period covered by this report. Based upon that evaluation, our Chief Executive Officer and our Chief Financial Officer concluded that, as of the end of the period covered by this report, our disclosure controls and procedures are effective. The term “disclosure controls and procedures” means controls and other procedures of ours that are designed to ensure that information required to be disclosed by us in the reports that we file or submit under the Exchange Act is recorded, processed, summarized and reported within required time periods. Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed by us in the reports that we file or submit under the Exchange Act is accumulated and communicated to management, including our Chief Executive Officer and Chief Financial Officer, as appropriate, to allow timely decisions regarding required disclosure.

Changes in Internal Control Over Financial Reporting

Effective April 1, 2018, we adopted ASU 2014-09. While ASU 2014-09 is expected to have an immaterial impact on our ongoing revenue and net income, it will require management to make significant judgments and estimates. As a result, we implemented changes to our internal control environment related to revenue recognition for the first quarter of Fiscal 2019. These changes include updated accounting policies affected by ASU 2014-09, reviewing internal controls over financial reporting and updating related to ASU 2014-09 as necessary, expanded data gathering to comply with the additional disclosure requirements, training of individuals responsible for implementation of, and continuing compliance with, ASU 2014-09, as well as ongoing contract review requirements.

46


 

Table of Contents

There was no change in our internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act) during our most recently completed fiscal quarter that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

PART II — OTHER INFORMATION

Item 1.  Legal Proceedings

Federal Securities Class Action

Two putative securities class action complaints were filed against us and certain of our current and former officers in the United States District Court for the Central District of California under the following captions:  David Kinney, etc. v. Capstone Turbine, et al., No. 2:15-CV-08914 on November 16, 2015 (the “Kinney Complaint”) and Kevin M. Grooms, etc. v. Capstone Turbine, et al., No. 2:15-CV-09155 on November 25, 2015 (the “Grooms Complaint”).

The putative class in the Kinney Complaint was comprised of all purchasers of our securities between November 7, 2013 and November 5, 2015.  The Kinney Complaint alleges material misrepresentations and omissions in public statements regarding BPC and the likelihood that BPC would not be able to fulfill many legal and financial obligations to us.  The Kinney Complaint also alleges that our financial statements were not appropriately adjusted in light of this situation and were not maintained in accordance with GAAP, and that we lacked adequate internal controls over accounting.  The Kinney Complaint alleges that these public statements and accounting irregularities constituted violations by all named defendants of Section 10(b) of the Exchange Act, and Rule 10b-5 thereunder, as well as violations of Section 20(a) of the Exchange Act by the individual defendants.  The Grooms Complaint makes allegations and claims that are substantially identical to those in the Kinney Complaint, and both complaints seek compensatory damages of an undisclosed amount.  On January 16, 2016, several shareholders filed motions to consolidate the Kinney and Grooms actions and for appointment as lead plaintiff.  On February 29, 2016, the Court granted the motions to consolidate, and appointed a lead plaintiff.  On May 6, 2016, a Consolidated Amended Complaint with allegations and claims substantially identical to those of the Kinney Complaint was filed in the consolidated action.  The putative class period in the Consolidated Amended Complaint is June 12, 2014 to November 5, 2015.  Defendants filed a motion to dismiss the Consolidated Amended Complaint on June 17, 2016. On March 10, 2017, the Court issued an order granting Defendants’ motion to dismiss in its entirety with leave to amend. Plaintiffs filed an amended complaint on April 28, 2017. Defendants’ motion to dismiss was filed June 2, 2017. Plaintiffs filed their opposition to the motion to dismiss on July 7, 2017, and Defendants filed their reply in support of the motion to dismiss on July 28, 2017. The court vacated the hearing that was scheduled for August 18, 2017. On February 9, 2018, the Court issued an Order denying Defendants’ motion to dismiss. On March 30, 2018, Defendants filed an answer to the Consolidated Amended Complaint. On May 17, 2018, the Court issued a scheduling order setting a trial date of March 17, 2020. On June 26, 2018, the Court entered an order vacating all deadlines through the end of October 2018 and temporarily staying formal discovery and other proceedings to allow the parties time to conduct a mediation. The parties participated in mediation on September 24, 2018, which did not result in a settlement. On November 16, 2018, after further settlement discussions, the parties advised the Court that they had reached an agreement in principle to settle the action in its entirety. The agreement in principle is subject to several conditions, including the execution of a stipulation of settlement that is satisfactory to all parties, and preliminary and final approval from the court, among other things. The deadline to file the motion for preliminary approval of the proposed settlement is March 7, 2019. If the settlement is finalized and approved by the Court, our insurance carrier will fund the settlement amount. We have not recorded any liability as of December 31, 2018 since any potential loss is not probable or reasonably estimable given the current status of the proceedings.

Federal Individual Securities Action

An individual securities complaint was filed against us, our Chief Executive Officer, and additional unidentified defendants in the United States District Court for the Central District of California under the following caption:  FiveT Investment Management LTD, et al., v. Capstone Turbine, et al., No. 2:18-CV-03512 on April 25, 2018.  The lawsuit alleges material misrepresentations and omissions regarding our revenue, sales, and operations because of alleged improper revenue recognition and backlog calculations related to BPC. The lawsuit alleged that these statements constituted violations by all named defendants of Section 10(b) of the Exchange Act, and Rule 10b-5 thereunder, as well as violations of Section 20(a) of the Exchange Act by the individual defendants. The complaint also asserted claims against all named defendants for fraud, negligent misrepresentation, violations of California Civil Code sections 1709

47


 

Table of Contents

and 1710, and California Corporations Code sections 25400 and 25401. Additionally, the complaint asserted a cause of action against the individual defendants for breach of fiduciary duty. It demanded compensatory damages for the amount of damages allegedly suffered, pre-judgment and post-judgment interest, and fees.

On June 29, 2018, the plaintiffs filed an Amended Complaint for Common Law Fraud and Negligent Misrepresentation.  The Amended Complaint asserts claims for common law fraud and negligent misrepresentation, against the Company, Mr. Jamison, and unidentified individual defendants. The Amended Complaint demands damages in an unspecified amount, plus pre-judgment and post-judgment interest and fees.  Defendants filed their answer to the Amended Complaint on August 17, 2018. Defendants filed their answer to the Amended Complaint on August 17, 2018. The parties participated in a mediation on September 24, 2018.  The mediation did not result in a settlement.  On October 12, 2018, the plaintiffs filed a motion for leave to amend their complaint, seeking to reinstate the cause of action for violation of California Civil Code section 25401.  On November 29, 2018, the Court granted plaintiffs’ motion for leave to amend and plaintiffs filed their Second Amended Complaint, which asserts claims for common law fraud, negligent misrepresentation, and violation of California Civil Code section 25401 against the Company, Mr. Jamison, and unidentified individual defendants. On December 20, 2018, defendants filed their answer to the Second Amended Complaint. The parties are now engaged in discovery. We have not recorded any liability as of December 31, 2018 since any potential loss is not probable or reasonably estimable given the current status of the proceedings.   

State Derivative Lawsuits — California

On February 18, 2016, a purported shareholder derivative action was filed in Los Angeles Superior Court in the State of California against us and certain of our current and former officers and directors under the following caption:  Stesiak v. Jamison, et al., No. BC610782.  The lawsuit alleges that certain of our current and former officers and directors knew or should have known that BPC would be unable to fulfill its obligations to us, but allowed us to make false and misleading statements regarding BPC and our financial condition.  The complaint also alleges that the defendants failed to timely adjust our account receivables and backlog to reflect BPC’s inability to pay us.  The complaint asserts causes of action for breach of fiduciary duty and unjust enrichment.  It demands damages for the amount of damage sustained by us as a result of the individual defendants’ alleged breach of fiduciary duties and unjust enrichment, that we institute corporate governance reforms, and disgorgement from the individual defendants.  On May 5, 2016, the parties filed a stipulation and proposed order seeking to stay this action until such time as the defendants’ motion(s) to dismiss the federal securities class action are either granted with prejudice or denied in whole or in part. On May 10, 2016, the Court entered that proposed order. On March 9, 2018, following the Court’s order denying Defendants’ motion to dismiss in the federal securities class action, the parties filed a stipulation and proposed order seeking to stay this action until the close of fact discovery in the federal securities class action. On March 20, 2018, the Court entered that proposed order. A status conference is scheduled for March 18, 2019.

On June 8, 2016, a purported shareholder derivative action entitled Velma Kilpatrick v. Simon, et al., No. BC623167, was filed in Los Angeles Superior Court in the State of California against us and certain of our current and former officers and directors.  The complaint alleges that certain of our current and former officers and directors knew or should have known that BPC would be unable to fulfill its obligations to us, but allowed us to make false and misleading statements regarding BPC and our financial condition.  The complaint also alleges that the defendants failed to timely adjust our account receivables and backlog to reflect BPC’s inability to pay us.  The complaint asserts causes of action for breach of fiduciary duty.  It demands damages for the amount of damage sustained by us as a result of the individual defendants’ alleged breach of fiduciary duties, and that we institute corporate governance reforms. On August 23, 2016, the parties filed a stipulation and proposed order seeking to stay this action until such time as the defendants’ motion(s) to dismiss the federal securities class action are either granted with prejudice or denied in whole or in part. On March 9, 2018, following the Court’s order denying Defendants’ motion to dismiss in the federal securities class action, the parties filed a stipulation and proposed order seeking to stay this action until the close of fact discovery in the federal securities class action. On March 20, 2018 the Court entered that proposed order. A status conference is scheduled for March 11, 2019.

The parties in both of the above state derivative lawsuits participated in a mediation held on September 24, 2018. The parties did not reach a settlement on the day of the mediation and negotiations are ongoing.

48


 

Table of Contents

Federal Derivative Lawsuits

On March 7, 2016, a purported shareholder derivative action was filed in the United States District Court for the Central District of California against us and certain of our current and former officers and directors under the following caption:  Haber v. Jamison, et al., No. CV16-01569-DMG (RAOx).  The lawsuit alleges that certain of our current and former officers and directors knew or should have known that BPC would be unable to fulfill its obligations to us, but allowed us to make false and misleading statements regarding BPC and our financial condition.  The complaint asserts a cause of action for breach of fiduciary duty.  It demands damages for the amount of damage sustained by us as a result of the individual defendants’ alleged breach of fiduciary duties, and equitable relief, including that we institute appropriate corporate governance reforms.  On May 11, 2016, the parties filed a stipulation and proposed order seeking to stay this action until such time as the defendants’ motion(s) to dismiss the federal securities class action are either granted with prejudice or denied in whole or in part. On May 13, 2016, the Court entered that proposed order.  

On July 12, 2016 and July 18, 2016, respectively, two additional purported shareholder derivative actions were filed in the United States District Court for the Central District of California against us and certain of our current and former officers and directors, under the caption Tuttle v. Atkinson, et al., No. CV16-05127, and Boll v. Jamison, et al., No. CV16-5282, respectively.  The lawsuits allege that certain of our current and former officers and directors knew or should have known that BPC would be unable to fulfill its obligations to us, but allowed us to make false and misleading statements regarding BPC and our financial condition.  The Tuttle complaint asserts causes of action for breach of fiduciary duty, gross mismanagement, and unjust enrichment, and the Boll complaint asserts causes of action for breach of fiduciary duty, unjust enrichment, abuse of control, gross mismanagement, and waste of corporate assets.  Both complaints demand damages sustained by us as a result of the individual defendants’ alleged breaches of fiduciary duties, and equitable relief, including that we institute appropriate corporate governance reforms. The federal derivative actions were stayed until such time as the defendants’ motion(s) to dismiss the federal securities class action are either granted with prejudice or denied in whole or in part. On March 9, 2018, following the Court’s order denying Defendants’ motion to dismiss in the federal securities class action, the parties filed a stipulation and proposed order seeking to stay this action until the close of fact discovery in the federal securities class action. On March 13, 2018, the Court granted the parties’ stipulation.

 

The parties in both of the above federal derivative lawsuits participated in a mediation held on September 24, 2018. The parties did not reach a settlement on the day of the mediation and negotiations are ongoing.

Capstone Turbine Corporation v. Regatta Solutions, Inc.

On August 23, 2018, we initiated arbitration proceedings against its former distributor, Regatta Solutions, Inc. (“Regatta”), with the American Arbitration Association, under the following caption: Capstone Turbine Corp. v. Regatta Solutions, Inc., Case No. 01-18-0003-0860 (the “Capstone-Regatta Arbitration”). We have alleged claims against Regatta for breach of contract and unjust enrichment relating to the parties’ prior distributor relationship, which terminated at the end of March of 2018, and the related wind-down agreement between the parties. As remedies for these claims, we are seeking compensatory, consequential, and punitive damages, along with declaratory relief and attorney’s fees, interest, and costs.

On October 18, 2018, Regatta filed its answer and cross-claims in the Capstone-Regatta Arbitration. In its cross-claims, Regatta has asserted claims for breach of contract, intentional interference with prospective economic advantage, fraud, and intentional interference with contractual relations, relating to the parties’ agreement to wind-down relations and Regatta’s purported sales efforts in California. As remedies for these alleged claims, Regatta is seeking no less than $1.5 million in general and compensatory damages, along with punitive and exemplary damages, as well as attorney’s fees and costs. We have filed and served an answering statement denying Regatta’s counterclaims and asserting several affirmative defenses.

Also on October 18, 2018, Regatta filed a lawsuit in the Superior Court of the State of California, County of Orange, alleging two counts of fraud, and one count of interference with contractual relations, individually against Mr. James Crouse, Executive Vice President of Sales for us, arising out of the same allegations made in Regatta’s counterclaim. As remedies for these alleged claims, Regatta again sought no less than $1.5 million in general and compensatory damages, along with punitive and exemplary damages, as well as attorney’s fees and costs. The case was filed under the caption Regatta Solutions, Inc., v. Jim Crouse, et. al., Case No. 30-2018-01026571-CU-FR-CJC. On

49


 

Table of Contents

December 14, 2018, Regatta stipulated and agreed to arbitrate its claims against Mr. James Crouse and dismissed him from the Superior Court action.

On January 16, 2019, the parties participated in a mediation that did not resolve the dispute. Settlement negotiations are ongoing. The parties are currently involved in the discovery process, and an evidentiary hearing in the Capstone-Regatta Arbitration is scheduled to begin June 18, 2019. The Company has not recorded any liability as of December 31, 2018, since any potential loss is not probable or reasonably estimable given the current status of the proceedings.

Capstone Turbine Corporation v. Energy Systems, Inc.

On August 17, 2018 Capstone initiated arbitration proceedings against its former distributor, Energy Systems of Caribbean, Inc. (“Energy Systems”) by seeking declaratory relief that its action in terminating the distributorship was justified under the law. The claim was filed with the American Arbitration Association under the following caption: Capstone Turbine Corp. v. Energy Systems of Caribbean, Inc., Case No. 01-18-0003-1307. As remedies for these claims, we are seeking declaratory relief and attorney’s fees, interest and costs.

On August 22, 2018, Energy Systems filed a claim against us in Puerto Rico alleging Breach of Distribution Contract under Law No. 75 of June 24, 1964, as amended, 10 l.p.r.a. §§ 278-278. The case was filed under the caption Energy Systems of Caribbean, Inc., v. Capstone Turbine Corporation, CIVIL NO. SJ2018cv06543 (904). As remedies for these alleged claims, Energy Systems seeks actual damages, injunctive relief, attorney’s fees and costs. This matter was subsequently removed to the United States District Court for the District of Puerto Rico based on diversity jurisdiction (Case No. 3:18-cv-01611). The parties have since stipulated to a stay of both the federal litigation and arbitration so that the parties may pursue settlement. We have not recorded any liability as of December 31, 2018 since any potential loss is not probable or reasonably estimable given the current status of the proceedings.

Item 1A.  Risk Factors

There have been no material changes to the risk factors disclosed in our Annual Report on Form 10-K for Fiscal 2018 except for the revision of the risk factors set forth below:

If we fail to meet all applicable Nasdaq Capital Market requirements and Nasdaq determines to delist our common stock, the delisting could adversely affect the market liquidity of our common stock, impair the value of your investment and adversely affect our ability to raise needed funds.

On November 23, 2018, Capstone Turbine Corporation, a Delaware corporation (the “Company”), received a notice from the Listing Qualifications Department of the Nasdaq Stock Market (“Nasdaq”) stating that, for the last 30 consecutive business days, the closing bid price for the Company’s common stock had been below the minimum $1.00 per share requirement for continued listing on the Nasdaq Capital Market as set forth in Nasdaq Listing Rule 5550(a)(2). In accordance with Nasdaq Listing Rule 5810(c)(3)(A), the Company has been provided 180 calendar days, or until May 22, 2019, to regain compliance with the minimum bid price requirement. In order to regain compliance, the bid price of the Company’s common stock must close at $1.00 per share or more for a minimum of ten consecutive business days, at which time Nasdaq would provide written confirmation of the Company’s compliance. If the Company is not in compliance by May 22, 2019, the Company may be eligible for a second 180 calendar day period to regain compliance, provided the Company meets the continued listing requirement for market value of publicly held shares and all other initial listing standards for Nasdaq, except the bid price requirement, and will need to provide written notice to Nasdaq of its intention to cure the deficiency during the second compliance period. If the Company is not eligible or it appears to Nasdaq that the Company will not be able to cure the deficiency during the second compliance period, Nasdaq will provide written notice to the Company that the Company’s common stock will be subject to delisting. At that time, the Company may appeal the delisting determination to a Hearings Panel. We will monitor the closing bid price of our common stock and will consider various possible options if it does not appear that we will return to compliance, including seeking stockholder approval for a reverse stock split.

If we fail to meet all applicable Nasdaq Capital Market requirements in the future and Nasdaq determines to delist our common stock, the delisting could adversely affect the market liquidity of our common stock and adversely affect our ability to obtain financing for the continuation of our operations. This delisting could also impair the value of your investment.

50


 

Table of Contents

Future issuances or sales of our common stock or exercises by holders of our outstanding warrants could lower our stock price and dilute the interests of existing stockholders.

We may issue additional shares of our common stock in the future. The issuance of a substantial amount of common stock could have the effect of substantially diluting the interests of our current stockholders. In addition, the sale of a substantial amount of common stock in the public market, either in the initial issuance or in a subsequent resale by investors who acquired such common stock in a private placement, could have a material adverse effect on the market price of our common stock. We cannot predict the effect, if any, that future public sales of our common stock or the availability of additional shares of our common stock for sale will have on the market and trading price of our common stock. In addition, we currently have warrants outstanding for the purchase of up to an aggregate of 6,765,087 shares of our common stock and certain of our warrant holders also have the right to require us to register under the Securities Act the shares issuable upon exercise of their warrants. To the extent the warrants outstanding are fully exercised, a significant number of shares of common stock will be issued, which will result in dilution to the holders of our shares of common stock and an increase in the number of shares eligible for resale in the public market. If any of our existing stockholders sell substantial amounts of our common stock in the public market, or if the public perceives that such sales could occur, this could have an adverse impact on the market and trading price of our securities, even if there is no relationship between such sales and the performance of our business.

We may be unable to fund our future operating requirements, which could force us to curtail our operations.

To the extent that the funds we now have on hand are insufficient to fund our future operating requirements, we would need to raise additional funds, through further public or private equity or debt financings depending upon prevailing market conditions. These financings may not be available or, if available, may be on terms that are not favorable to us and could result in dilution to our stockholders and reduction of the trading price of our stock. The state of capital markets when we seek to raise additional capital could also impede our ability to raise additional capital on favorable terms or at all. If adequate capital were not available to us, we likely would be required to significantly curtail our operations or possibly even cease our operations.

On February 4, 2019, we entered into a Note Purchase Agreement (the “Note Purchase Agreement”), by and among us, certain subsidiaries of us party thereto as guarantors, Goldman Sachs Specialty Lending Holdings, Inc. and any other purchasers party thereto from time to time (collectively, the “Purchaser”) and Goldman Sachs Specialty Lending Holdings, Inc., as collateral agent, in connection with the sale of senior secured notes of us in a private placement exempt from registration under the Securities Act of 1933, as amended. Under the Note Purchase Agreement, we sold to the Purchaser $30.0 million aggregate principal amount of senior secured notes (the “Notes”) and the entire principal amount of the Notes is due and payable on February 4, 2022 (the “Maturity Date”). The Notes do not amortize and the entire principal balance is due in a single payment on the Maturity Date.

As a condition of the Note Purchase Agreement, we have restricted $12.0 million of cash equivalents as additional security for the credit facility. Borrowings under the Notes Purchase Agreement will bear interest at a rate of 13.0% per annum, computed on the basis of a 360-day year composed of twelve 30-day months, and payable quarterly on March 31, June 30, September 30 and December 31 of each year until maturity, subject to increase during the occurrence of an event of default. Obligations under the Note Purchase Agreement are secured by all of our assets, including intellectual property and general intangibles.  The Note Purchase Agreement contains customary covenants, including, among others, covenants that restrict the Company’s ability to incur debt, grant liens, make certain investments and acquisitions, pay dividends, repurchase equity interests, repay certain debt, amend certain contracts, enter into affiliate transactions and asset sales or make certain equity issuances (including equity issuances that would cause an ownership change within the meaning of Section 382 of the Internal Revenue Code), and covenants that require the Company to, among other things, provide annual, quarterly and monthly financial statements, together with related compliance certificates, maintain its property in good repair, maintain insurance and comply with applicable laws. 

The Note Purchase Agreement also defines an event of default as, among other things, payment default, bankruptcy events, cross defaults, breaches of covenants and representations and warranties, changes of control,

51


 

Table of Contents

judgment defaults and an ownership change within the meaning of Section 382 of the Internal Revenue Code. An event of default, if not waived, could have a material adverse effect on us.

Our obligations under the Note Purchase Agreement could have important consequences, including the following:

·

We may have difficulty obtaining additional financing at favorable interest rates to meet our requirements for operations, capital expenditures, general corporate or other purposes.

·

We will be required to dedicate a substantial portion of our cash flow to the payment of principal and interest on the Notes, which will reduce the amount of funds available for operations, capital expenditures and future acquisitions.

·

Goldman Sachs Specialty Lending Holdings, Inc., as collateral agent under the Note Purchase Agreement, may enforce any and all liens and security interests on the collateral we have used to secure the Notes and we may forfeit our right to such collateral.

·

In order to avoid breaches of the Note Purchase Agreement covenant relating to Section 382 changes of ownership, we may be limited in the amount of additional equity securities we are able to sell to raise capital. Accordingly, our desire to preserve our NOLs may cause us to forgo otherwise attractive funding opportunities.

We may be required to repay the Notes immediately if we default on any of the numerous financial or other restrictive covenants contained in the Note Purchase Agreement. It is not certain whether we will have, or will be able to obtain, sufficient funds to make any such accelerated payments. If any outstanding indebtedness under the Notes is accelerated, our assets may not be sufficient to repay such indebtedness.

We may not be able to produce our products on a timely basis if we fail to correctly anticipate product supply requirements or if we suffer delays in production resulting from issues with our suppliers. Our suppliers may not supply us with a sufficient amount of components or components of adequate quality, or they may provide components at significantly increased prices.

Some of our components are currently available only from a single source or limited sources. We may experience delays in production if we fail to identify alternative suppliers, or if any parts supply is interrupted, each of which could materially adversely affect our business and operations. In order to reduce manufacturing lead times and ensure adequate component supply, we enter into agreements with certain suppliers that allow them to procure inventories based upon criteria defined by us. If we fail to anticipate customer demand properly, an oversupply of parts could result in excess or obsolete inventories, which could adversely affect our business. Additionally, if we fail to correctly anticipate our internal supply requirements, an undersupply of parts could limit our production capacity. Our inability to meet volume commitments with suppliers could affect the availability or pricing of our parts and components. A reduction or interruption in supply, a significant increase in price of one or more components or a decrease in demand of products could materially adversely affect our business and operations and could materially damage our customer relationships. Financial problems of suppliers on whom we rely could limit our supply of components or increase our costs. Also, we cannot guarantee that any of the parts or components that we purchase will be of adequate quality or that the prices we pay for the parts or components will not increase. Inadequate quality of products from suppliers could interrupt our ability to supply quality products to our customers in a timely manner. Additionally, defects in materials or products supplied by our suppliers that are not identified before our products are placed in service by our customers could result in higher warranty costs and damage to our reputation. We also outsource certain of our components internationally. As a result of outsourcing internationally, we may be subject to delays in delivery because of regulations associated with the import/export process, delays in transportation or regional instability.

During the first quarter of Fiscal 2019, we identified a defect in one of the component parts for microturbine systems from one of our single source suppliers. As a result of this defect we have identified several new suppliers with greater engineering expertise and robust quality management systems. The transition is complex, lengthy and may result in an interruption in our manufacturing process. An interruption in our manufacturing process for this component part would adversely impact our results of operations.

52


 

Table of Contents

During the fourth quarter of Fiscal 2018, we received notification from one of our single source suppliers that they were at maximum capacity and would require prepayment and a significant increase in the price of multiple components in order to fulfill our supply requirements for Fiscal 2019. Due to their capacity issues, it is uncertain if we will experience an interruption in parts from this supplier or be able to fully offset or recover any resulting component price increases. This could impact margins or sales in future quarters. During the first quarter of Fiscal 2019, we issued a prepayment of approximately $2.2 million to this single source supplier. As of December 31, 2018, there were gradual improvement trends in the capacity issues at the supplier. We are in the process of qualifying an additional supplier for these components and we expect this supplier to be qualified and transitioned by Fiscal 2020.

Our sales and results of operations could be materially and adversely impacted by risks inherent in international markets.

As we expand in international markets, customers may have difficulty or be unable to integrate our products into their existing systems or may have difficulty complying with foreign regulatory and commercial requirements. As a result, our products may require redesign. Any redesign of the product may delay sales or cause quality issues. In addition, we may be subject to a variety of other risks associated with international business, including import/export restrictions, fluctuations in currency exchange rates and economic or political instability. Our business in particular is also subject to risks relating to uncertainties and effects of the implementation of the United Kingdom’s referendum to withdraw membership from the EU (referred to as “Brexit”), including financial, legal, tax and trade implications. In addition, doing business internationally subjects us to risks relating to political or social unrest, as well as corruption and government regulation, including U.S. laws such as the Foreign Corrupt Practices Act and the U.K. Bribery Act, that impose stringent requirements on how we conduct our foreign operations. If any of these events occur, our businesses may be adversely affected.

 

If any of our distributor relationships is not successful, we may terminate or choose not to renew the related distributor agreement, which may result in interference with the wind down of the relationship or the transition of end-user service agreements, and could potentially negatively impact our distribution channel or result in litigation costs or other expenses.

 

Successfully managing our distribution channel in an effort to reach various potential customer segments for our products and services is a complex process. Each of our distributors is a strategically placed independent partner that provides for marketing and selling of our products and services on our behalf. If our distribution relationships are not successful, we may lose sales opportunities, customers, and revenues. Our agreements with our distribution partners require them to comply with performance conditions that are subject to interpretation, which could result in disagreements. At any given time, we may be in disputes with one or more distribution partners. Any such dispute could result in lengthy and costly litigation, even if the outcome is ultimately in our favor. We cannot predict the outcome of any arbitration or litigation, the effect of any negative judgment against us or the amount of any settlement that we may enter into with such distribution partners. A contractual dispute with a distribution partner may result in our or our distribution partner seeking to terminate the related distribution agreement, even if such termination would be wrongful, which could harm our business, or interfere with a previously agreed  wind down of the relationship or transition of end-user service agreements. Any prolonged disruptions of our distribution channels that results from the termination of one or more of our distributions or our failure to renew our distribution agreements with our desired distributors, could negatively affect our ability to effectively sell our products and would materially and adversely affect our business, financial condition, results of operations and prospects.

 

We have effected reductions in our operating costs and, as a result, our ability to cut costs further and sustain our business initiatives may be limited. 

Beginning in April 2015, we have implemented various initiatives to reduce operating costs across all functions of the Company and focus our business efforts on our most promising near-term product opportunities. As a result of these cost-cutting initiatives, we may have a more limited ability to further reduce costs to increase our liquidity should such measures become necessary. Any further reductions may have a materially negative impact on our business.

 

Item 2.  Unregistered Sales of Equity Securities and Use of Proceeds

None

 

53


 

Table of Contents

Item 3.  Defaults Upon Senior Securities

 

None

 

Item 4.  Mine Safety Disclosures

 

Not applicable

 

Item 5.  Other Information

None

54


 

Table of Contents

Item 6.  Exhibits

 

 

 

 

 

Exhibit
Number

    

Description

3.1

 

Second Amended and Restated Certificate of Incorporation of Capstone Turbine Corporation (a)

3.2

 

Certificate of Amendment to the Second Amended and Restated Certificate of Incorporation of Capstone Turbine Corporation, dated August 30, 2012 (b)

3.3

 

Certificate of Amendment to the Second Amended and Restated Certificate of Incorporation of Capstone Turbine Corporation, filed November 6, 2015 (c)

3.4

 

Fourth Amended and Restated Bylaws of Capstone Turbine Corporation (d)

4.1

 

Form of Senior Indenture by and between Capstone Turbine Corporation and Computershare Trust Company, N.A., Trustee (e)

4.2

 

Form of Subordinated Indenture by and between Capstone Turbine Corporation and Computershare Trust Company, N.A., Trustee (e)

4.3

 

Note Purchase Agreement, dated as of February 4, 2019, by and among Capstone Turbine Corporation, certain of its subsidiaries party thereto as guarantors, Goldman Sachs Specialty Lending Holdings, Inc., as purchaser and any other purchasers party thereto from time to time and Goldman Sachs Specialty Lending Holdings, Inc., as collateral agent (f)

4.4

 

Purchase Warrant for Common Shares issued in favor of Goldman, Sachs & Co. LLC, dated February 4, 2019 (f)

10.1

 

Form of Change in Control Agreement (g)

10.2

 

First Amendment to the Accounts Receivable Agreement and Promissory Note between Capstone Turbine Corporation and Turbine International, LLC, dated June 5, 2018 (h)

10.3

 

At The Market Offering Agreement, dated June 7, 2018, between Capstone Turbine Corporation and H.C. Wainwright & Co., LLC (i)

10.4

 

Second Amendment to The Development and License Agreement between Capstone Turbine Corporation and Carrier Corporation, dated July 25, 2018, effective September 4, 2007 (j)

10.5

 

First Amendment to Business Financing Agreement between Capstone Turbine Corporation and Western Alliance Bank, N.A. dated June 1, 2018 (h)

31.1

 

Certification of Chief Executive Officer pursuant to Section 302 of the Sarbanes—Oxley Act of 2002

31.2

 

Certification of Chief Financial Officer pursuant to Section 302 of the Sarbanes—Oxley Act of 2002

32

 

Certification of Chief Executive Officer and Chief Financial Officer pursuant to Section 906 of the Sarbanes—Oxley Act of 2002

101.INS

 

XBRL Instance Document

101.SCH

 

XBRL Schema Document

101.CAL

 

XBRL Calculation Linkbase Document

101.LAB

 

XBRL Label Linkbase Document

101.PRE

 

XBRL Presentation Linkbase Document

101.DEF

 

XBRL Definition Linkbase Document


(a)Incorporated by reference to Capstone Turbine Corporation’s Registration Statement on Form S-1/A, dated May 8, 2000 (File No. 333-33024)

 

(b)Incorporated by reference to Appendix B to Capstone Turbine Corporation’s Definitive Proxy Statement, filed on July 17, 2012 (File No. 001-15957)

 

(c)Incorporated by reference to Capstone Turbine Corporation’s Current Report on Form 8-K, filed on November 6, 2015 (File No. 001-15957)

 

(d)Incorporated by reference to Capstone Turbine Corporation’s Current Report on Form 8-K, filed on September 1, 2017 (File No. 001-15957)

 

55


 

Table of Contents

(e)Incorporated by reference to Capstone Turbine Corporation’s Registration Statement on Form S-3 on filed on June 7, 2018 (File No. 333-225503)

 

(f)Incorporated by reference to Capstone Turbine Corporation’s Current Report on Form 8-K on filed on February 5, 2019 (File No. 001-15957)

 

(g)Incorporated by reference to Capstone Turbine Corporation’s Current Report on Form 8-K, filed on June 11, 2018 (File No. 001-15957)

 

(h)Incorporated by reference to Capstone Turbine Corporation’s Annual Report on Form 10-K, filed on June 7, 2018 (File No. 001-15957)

 

(i) Incorporated by reference to Capstone Turbine Corporation’s Current Report on Form 8-K, filed on June 7, 2018 (File No. 001-15957)

 

(j)Incorporated by reference to Capstone Turbine Corporation’s Current Report on Form 8-K, filed on July 26, 2018 (File No. 001-15957)

 

 

56


 

Table of Contents

SIGNATURES

 

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

 

 

CAPSTONE TURBINE CORPORATION

 

 

 

 

 

By:

/s/ JAYME L. BROOKS

 

 

Jayme L. Brooks

 

 

Chief Financial Officer & Chief Accounting Officer

 

 

(Principal Financial and Accounting Officer)

Date: February 7, 2019

 

 

57