Table of Contents
As filed with the Securities and Exchange Commission on December 20, 2006
Registration No. 333-
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, DC 20549
FORM S-3
REGISTRATION STATEMENT
UNDER
THE SECURITIES ACT OF 1933
KULICKE AND SOFFA INDUSTRIES, INC.
(Exact name of registrant as specified in its charter)
| Pennsylvania | 23-1498399 | |
| (State or other jurisdiction of incorporation or organization) |
(I.R.S. Employer Identification Number) |
1005 Virginia Drive, Fort Washington, Pennsylvania, 19034
(215) 784-6000
(Address, including zip code, and telephone number, including area code, of registrant’s principal executive offices)
David J. Anderson
Vice President and General Counsel
1005 Virginia Drive, Fort Washington, Pennsylvania, 19034
(215) 784-6000
(Name, address, including zip code, and telephone number, including area code, of agent for service)
Copy to:
F. Douglas Raymond, III
Drinker Biddle & Reath LLP
One Logan Square
18th and Cherry Streets
Philadelphia, PA 19103-6996
Approximate date of commencement of proposed sale to the public: As soon as practicable after the effective date of this Registration Statement.
If the only securities being registered on this Form are being offered pursuant to dividend or interest reinvestment plans, please check the following box. ¨
If any of the securities being registered on this Form are to be offered on a delayed or continuous basis pursuant to Rule 415 under the Securities Act of 1933, other than securities offered only in connection with dividend or interest reinvestment plans, check the following box. x
If this Form is filed to register additional securities for an offering pursuant to Rule 462(b) under the Securities Act, please check the following box and list the Securities Act registration statement number of the earlier effective registration statement for the same offering. ¨
If this Form is a post-effective amendment filed pursuant to Rule 462(c) under the Securities Act, check the following box and list the Securities Act registration statement number of the earlier effective registration statement for the same offering. ¨
If this Form is a registration statement pursuant to General Instruction I.D. or a post-effective amendment thereto that shall become effective upon filing with the Commission pursuant to Rule 462(e) under the Securities Act, check the following box. ¨
If this Form is a post-effective amendment to a registration statement filed pursuant to General Instruction I.D. filed to register additional securities or additional classes of securities pursuant to Rule 413(b) under the Securities Act, check the following box. ¨
CALCULATION OF REGISTRATION FEE
| Title of Each Class of Securities to be Registered | Amount to be Registered(1) |
Proposed Maximum Per Unit (1) (2) |
Proposed Maximum Price (1) (2) |
Amount of Registration Fee | ||||
| Common Stock, no par value |
200,000 | $8.11 | $1,622,000 | $174 |
| (1) | In the event of a stock split, stock dividend, recapitalization or similar transaction involving the registrant’s common stock, the number of shares registered shall automatically be adjusted to cover the additional shares in accordance with Rule 416(a) under the Securities Act of 1933. |
| (2) | Estimated solely for the purpose of calculating the registration fee pursuant to Rule 457(c) under the Securities Act of 1933 and based upon the average high and low sale prices of the common stock as reported on the Nasdaq Global Market on December 13, 2006. |
The registrant hereby amends this registration statement on such date or dates as may be necessary to delay its effective date until the registrant shall file a further amendment which specifically states that this registration statement shall thereafter become effective in accordance with Section 8(a) of the Securities Act of 1933 or until the registration statement shall become effective on such date as the Commission, acting pursuant to said Section 8(a), may determine.
Table of Contents
The information in this prospectus is not complete and may be changed. The selling securityholder may not sell these securities until the registration statement filed with the Securities and Exchange Commission is effective. This prospectus is not an offer to sell these securities and it is not soliciting an offer to buy these securities in any jurisdiction where the offer or sale is not permitted.
Subject to Completion, dated December 20, 2006
200,000 Shares
of
Common Stock
This prospectus relates to the sale, from time to time, of up to 200,000 shares of our common stock, without par value, by Reliance Trust Company, as trustee of the trust created in connection with the Kulicke and Soffa Industries, Inc. Defined Non-Contributory Retirement Income Plan, which we refer to as the pension plan. The shares of our common stock have been contributed and issued by us to the trust to fund certain obligations to the pension plan. The common stock will be sold by the trustee for the account of the trust. The shares of our common stock offered by this prospectus are sometimes referred to as the “securities.”
The common stock may be offered and sold by the trustee from time to time directly or through broker-dealers. The common stock may be sold in one or more transactions at market prices prevailing at the time of sale or at prices determined on a negotiated or competitive bid basis. See “Plan of Distribution.” We will not receive any portion of the proceeds of the sale of the common stock offered by this prospectus and will bear all expenses incidental to the registration, offering and sale of the common stock to the public, other than commissions, fees and discounts of underwriters, brokers, dealers and agents.
Our common stock is traded on the Nasdaq Global Market under the symbol “KLIC.” On December 13, 2006, the last reported sale price of our common stock was $8.03 per share.
Investing in the common stock offered hereby involves risks. See “ Risk Factors” beginning on page 3 of this prospectus.
Our principal executive offices are located at 1005 Virginia Drive, Fort Washington, Pennsylvania, 19034 and our telephone number is (215) 784-6000.
Neither the Securities and Exchange Commission nor any state securities commission has approved or disapproved of these securities or determined if this prospectus is truthful or complete. Any representation to the contrary is a criminal offense.
This prospectus is dated December 20, 2006
Table of Contents
| ii | ||
| 1 | ||
| 3 | ||
| 11 | ||
| 11 | ||
| 12 | ||
| 13 | ||
| 15 | ||
| 15 | ||
| 16 | ||
About this Prospectus
All references in this prospectus to “Kulicke & Soffa,” the “company,” “our,” “us” and “we” refer to Kulicke and Soffa Industries, Inc. and its consolidated subsidiaries, except where the context otherwise requires or as otherwise indicated.
You should rely only on the information contained in, or incorporated by reference into, this prospectus. You may obtain the information incorporated by reference into this prospectus without charge by following the instructions under “Where You Can Find More Information” below. We have not authorized any other person to provide you with different information. If anyone provides you with different or inconsistent information, you should not rely on it. We are not making an offer to sell these securities or soliciting an offer to buy the securities in any jurisdiction where the offer or sale is not permitted. Neither we nor the trustee have taken any action that would permit the trustee to publicly sell our common stock in any jurisdiction outside the United States. If you are an investor outside the United States, you should inform yourself about, and comply with any restrictions pertaining to, the offering of the securities and the distribution of this prospectus. You should assume that the information appearing in this prospectus is accurate only as of the date of this prospectus. Our business, financial condition, results of operations and prospects may have changed since that date.
This prospectus is based on information provided by us and by other sources that we believe are reliable. We cannot assure you that this information is accurate or complete. This prospectus summarizes certain documents and other information, and we refer you to them for a more complete understanding of what we discuss in this prospectus. In making an investment decision, you must rely on your own examination of our company and the terms of this offering and the common stock, including the merits and risks involved.
We are not making any representation to any purchaser of the common stock regarding the legality of an investment in the common stock by such purchaser. You should not consider any information in this prospectus to be legal, business or tax advice. You should consult your own attorney, business advisor or tax advisor for legal, business and tax advice regarding an investment in the common stock.
Table of Contents
SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS
In addition to historical information, this prospectus, including the information incorporated by reference into this prospectus, contains statements relating to future events or our future results. These statements are forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended (the “Securities Act”) and Section 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), and are subject to the safe harbor provisions created by statute. These forward-looking statements include, but are not limited to, statements that relate to our future revenue, product development, demand forecasts, competitiveness, operating expenses, cash flows, profitability, gross margins and benefits expected as a result of (among other factors):
| • | the projected growth rates in the overall semiconductor industry, the semiconductor assembly equipment market, and the market for semiconductor packaging materials; and |
| • | the projected continuing demand for wire bonders and die bonder equipment. |
Generally, words such as “may,” “will,” “should,” “could,” “anticipate,” “expect,” “intend,” “estimate,” “plan,” “goal,” “continue,” and “believe,” or the negative of or other variations on these and other similar expressions identify forward-looking statements. These forward-looking statements are made only as of the date of this prospectus. We do not undertake to update or revise the forward-looking statements contained in or incorporated by reference into this prospectus, whether as a result of new information, future events or otherwise.
Forward-looking statements are based on current expectations and involve risks and uncertainties and our future results could differ significantly from those expressed or implied by our forward-looking statements. These risks and uncertainties include, without limitation, those described under “Risk Factors” and those detailed from time to time in our filings with the Securities and Exchange Commission (the “SEC”), which are incorporated by reference into this prospectus. In addition, other risks and uncertainties not presently known to us or that we currently consider less significant could affect the accuracy of our forward-looking statements. In light of these and other uncertainties, you should not conclude that we will necessarily achieve any plans or objectives or projected financial results referred to in any forward-looking statements.
-ii-
Table of Contents
This summary contains basic information about us and this prospectus. Because it is a summary, it does not contain all of the information that you should consider before investing. You should read this entire prospectus carefully, including the section entitled “Risk Factors” and our financial statements and the other documents included in or incorporated by reference into this prospectus, before making an investment decision.
We design, manufacture and market capital equipment and packaging materials as well as service, maintain, repair and upgrade equipment, all used to assemble semiconductor devices. We are currently the world’s leading supplier of semiconductor wire bonding assembly equipment, according to VLSI Research, Inc. Our business is currently divided into two product segments:
| • | equipment; and |
| • | packaging materials. |
We believe we are the only major supplier to the semiconductor assembly industry that can provide customers with semiconductor die bonding and wire bonding equipment along with the complementary packaging materials that actually contact the surface of the customer’s semiconductor devices. We believe that the ability to control all of these assembly related products provides us with a significant competitive advantage and should allow us to develop system solutions to the new technology challenges inherent in assembling and packaging next-generation semiconductor devices.
Kulicke and Soffa Industries, Inc. was incorporated in Pennsylvania in 1956. Our principal offices are located at 1005 Virginia Drive, Fort Washington, Pennsylvania 19034 and our telephone number is (215) 784-6000. We maintain a website with the address www.kns.com. We are not including the information contained on our website as a part of, or incorporating it by reference into, this prospectus.
Table of Contents
The Offering
| Issuer |
Kulicke and Soffa Industries, Inc. | |
| Securities Offered |
200,000 shares of our common stock, without par value. | |
| Pension Plan |
The common stock is being offered by this prospectus for the account of a trust that was formed in January 1987 to allow us to fund our obligations under the pension plan. We authorized the issuance of 200,000 shares of our common stock to be contributed to the trust to meet certain of our obligations to the pension plan. Reliance Trust Company is trustee of the pension plan. A committee, consisting of officers and employees of our company, currently administers the pension plan. | |
| Use of Proceeds |
We will not receive any proceeds from the sale of our common stock offered by this prospectus. The proceeds will be retained by the trust to fund the pension plan’s future obligations to participants. | |
| Plan of Distribution |
The common stock may be offered and sold by the trustee from time to time directly or through broker-dealers. The common stock may be sold in one or more transactions at market prices prevailing at the time of sale or at prices determined on a negotiated or competitive bid basis. See “Plan of Distribution.” | |
| Listing of Common Stock |
Our common stock is listed on the Nasdaq Global Market under the symbol “KLIC.” | |
| Risk Factors |
Investing in the common stock involves risks. See “Risk Factors” and the other information contained elsewhere in, or incorporated by reference into, this prospectus for a description of certain risks you should consider before making an investment decision. | |
-2-
Table of Contents
You should carefully consider all of the information contained in this prospectus and the financial statements and other documents summarized in or incorporated by reference into this prospectus, including the risks described below, before making an investment decision. The risks described below are not the only ones facing our company. Additional risks not presently known to us or that we currently consider less significant may also impair our business operations.
Our business, financial condition, or results of operations could be materially, adversely affected by any of these risks. The trading price of our common stock could decline due to any of these risks, and you may lose all or part of your investment.
Risks Relating to Our Business
The semiconductor industry is volatile with sharp periodic downturns and slowdowns
Our operating results are significantly affected by the capital expenditures of large semiconductor manufacturers and their subcontract assemblers and vertically integrated manufacturers of electronic systems. Expenditures by semiconductor manufacturers and their subcontract assemblers and vertically integrated manufacturers of electronic systems depend on the current and anticipated market demand for semiconductors and products that use semiconductors, including personal computers, telecommunications equipment, consumer electronics, and automotive goods. Significant downturns in the market for semiconductor devices or in general economic conditions reduce demand for our products and materially and adversely affect our business, financial condition and operating results.
Historically, the semiconductor industry has been volatile, with periods of rapid growth followed by industry-wide retrenchment. These periodic downturns and slowdowns have adversely affected our business, financial condition and operating results. They have been characterized by, among other things, diminished product demand, excess production capacity, and accelerated erosion of selling prices. These downturns historically have severely and negatively affected the industry’s demand for capital equipment, including the assembly equipment and the packaging materials that we sell. There can be no assurances regarding levels of demand for our products, and in any case, we believe the historical volatility – both upward and downward – will persist.
We may experience increasing price pressure
Our historical business strategy for many of our products has focused on product performance and customer service rather than on price. The length and severity of the fiscal 2001 – fiscal 2003 economic downturn increased cost pressure on our customers and we have observed increasing price sensitivity on their part. In response, we are actively seeking to reduce our cost structure by moving operations to lower cost areas and by reducing other operating costs. If we are unable to realize prices that allow us to continue to compete on the basis of performance and service, our financial condition and operating results may be materially and adversely affected.
Our quarterly operating results fluctuate significantly and may continue to do so in the future
In the past, our quarterly operating results have fluctuated significantly. We expect that they will continue to fluctuate. Although these fluctuations are partly due to the volatile nature of the semiconductor industry, they also reflect other factors, many of which are outside of our control.
Some of the factors that may cause our revenues and/or operating margins to fluctuate significantly from period to period are:
| • | market downturns; |
| • | the mix of products that we sell because, for example: |
| • | some lines of equipment within our business segments are more profitable than others; and |
| • | some sales arrangements have higher margins than others; |
| • | the volume and timing of orders for our products and any order postponements; |
-3-
Table of Contents
| • | virtually all of our orders are subject to cancellation, deferral or rescheduling by the customer without prior notice and with limited or no penalties; |
| • | competitive pricing pressures may force us to reduce prices to retain the business; |
| • | higher than anticipated costs of development or production of new equipment models; |
| • | the availability and cost of the components for our products; |
| • | unanticipated delays in the development and manufacture of our new products and upgraded versions of our products and market acceptance of these products when introduced; |
| • | customers’ delay in purchasing our products due to anticipation that we or our competitors may introduce new or upgraded products; and |
| • | our competitors’ introduction of new products. |
Many of our expenses, such as research and development, selling, general and administrative expenses, and interest expense, do not vary directly with our net sales. Our research and development efforts include long-term projects lasting a year or more, which require significant investments. In order to realize the benefits of these projects, we believe that we must continue to fund them during periods when our net sales have declined. As a result, a decline in our net sales would adversely affect our operating results. In addition, if we were to incur additional expenses in a quarter in which we did not experience comparable increased net sales, our operating results would decline. In a downturn, we may have excess inventory, which is required to be written off. Some of the other factors that may cause our expenses to fluctuate from period-to-period include:
| • | the timing and extent of our research and development efforts; |
| • | severance, resizing, and other costs of relocating facilities; |
| • | inventory write-offs due to obsolescence; and |
| • | inflationary increases in the cost of labor or materials. |
Because our revenues and operating results are volatile and difficult to predict, we believe that consecutive period-to-period comparisons of our operating results may not be a good indication of our future performance.
We may not be able to rapidly develop, manufacture and gain market acceptance of new and enhanced products required to maintain or expand our business
We believe that our continued success depends on our ability to continuously develop and manufacture new products and product enhancements on a timely and cost-effective basis. We must introduce these products and product enhancements into the market in a timely manner in response to customers’ demands for higher performance assembly equipment, leading-edge materials customized to address rapid technological advances in integrated circuits, and capital equipment designs. Our competitors may develop new products or enhancements to their products that offer performance, features and lower prices that may render our products less competitive. The development and commercialization of new products requires significant capital expenditures over an extended period of time, and some products that we seek to develop may never become profitable. In addition, we may not be able to develop and introduce products incorporating new technologies in a timely manner that will satisfy our customers’ future needs or achieve market acceptance.
Substantially all of our sales and manufacturing operations are located outside of the United States, and we rely on independent foreign distribution channels for certain product lines; all of which subject us to risks, including risks from changes in trade regulations, currency fluctuations, political instability and war
Approximately 93% of our net sales for fiscal 2006 and 95% of our net sales for fiscal 2005 and 2004 were to customers located outside of the United States, in particular to customers located in the Asia/Pacific region. Our
-4-
Table of Contents
future performance will depend on our ability to continue to compete in foreign markets, particularly in the Asia/Pacific region. These economies have been highly volatile, resulting in significant fluctuation in local currencies, and political and economic instability. These conditions may continue or worsen, which may materially and adversely affect our business, financial condition and operating results.
We also rely on non-United States suppliers for materials and components used in our products, and nearly all of our manufacturing operations are located in countries other than the United States. We manufacture our automatic ball bonders and bonding wire in Singapore, we manufacture capillaries in Israel and China, die bonders in Switzerland and China, bonding wire in Switzerland, and we have sales, service and support personnel in China, Japan, Korea, Malaysia, the Philippines, Singapore, Taiwan and Europe. We also rely on independent foreign distribution channels for certain of our product lines. As a result, a major portion of our business is subject to the risks associated with international, and particularly Asia/Pacific, commerce, such as:
| • | risks of war and civil disturbances or other events that may limit or disrupt manufacturing and markets; |
| • | seizure of our foreign assets, including cash; |
| • | longer payment cycles in foreign markets; |
| • | international exchange restrictions; |
| • | restrictions on the repatriation of our assets, including cash; |
| • | significant foreign and United States taxes on repatriated cash; |
| • | the difficulties of staffing and managing dispersed international operations; |
| • | possible disagreements with tax authorities regarding transfer pricing regulations; |
| • | episodic events outside our control such as, for example, an outbreak of Severe Acute Respiratory Syndrome or influenza; |
| • | tariff and currency fluctuations; |
| • | changing political conditions; |
| • | labor conditions and costs; |
| • | foreign governments’ monetary policies and regulatory requirements; |
| • | less protective foreign intellectual property laws; and |
| • | legal systems which are less developed and which may be less predictable than those in the United States. |
Because most of our foreign sales are denominated in United States dollars, an increase in value of the United States dollar against foreign currencies, particularly the Japanese yen, will make our products more expensive than those offered by some of our foreign competitors. Our ability to compete overseas in the future may be materially and adversely affected by a strengthening of the United States dollar against foreign currencies.
Our international operations also depend upon favorable trade relations between the United States and those foreign countries in which our customers, subcontractors, and materials suppliers have operations. A protectionist trade environment in either the United States or those foreign countries in which we do business, such as a change in the current tariff structures, export compliance or other trade policies, may materially and adversely affect our ability to sell our products in foreign markets.
We are exposed to fluctuations in currency exchange rates that could negatively impact our financial results and cash flows
-5-
Table of Contents
Because a significant portion of our business is conducted outside the United States, we face exposure to adverse movements in foreign currency exchange rates which could have a material adverse impact on our financial results and cash flows. Historically, our primary exposures have related to (net) receivables denominated in currencies other than a foreign subsidiaries’ functional currency, and remeasurement of our foreign subsidiaries’ net monetary assets from the subsidiaries’ local currency into the subsidiaries’ functional currency (the U.S. dollar). In general, an increase in the value of the U.S. dollar could require certain of our foreign subsidiaries to record translation and remeasurement gains. Conversely, a decrease in the value of the U.S. dollar could require certain of our foreign subsidiaries to record losses on translation and remeasurement. An increase in the value of the dollar could increase the cost to our customers of our products in those markets outside the United States where we sell in dollars, and a weakened dollar could increase the cost of local operating expenses and procurement of raw materials. An increase in the value of China’s Yuan could increase our material, labor, and other operating expenses in China. Our board has granted management with limited authority to enter into foreign exchange forward contracts and other instruments designed to minimize the short term impact currency fluctuations have on our business. We have entered into foreign exchange forward contracts and expect to enter into additional foreign exchange forward contracts and other instruments in the future. Our attempts to hedge against these risks may not be successful and may result in a material adverse impact on our financial results and cash flows.
We may not be able to consolidate manufacturing facilities without incurring unanticipated costs and disruptions to our business
As part of our ongoing efforts to further reduce our cost structure, we seek to consolidate our manufacturing facilities. We may incur significant and unexpected costs, delays and disruptions to our business during this consolidation process. Because of unanticipated events, including the actions of governments, suppliers, employees or customers, we may not realize the synergies, cost reductions and other benefits of any consolidation to the extent or within the timeframe that we currently expect.
Our business depends on attracting and retaining management, marketing and technical employees
Our future success depends on our ability to hire and retain qualified management, marketing and technical employees. In particular, we periodically experience shortages of technical personnel. If we are unable to continue to attract and retain the managerial, marketing and technical personnel we require, our business, financial condition and operating results could be materially and adversely affected.
Difficulties in forecasting demand for our product lines may lead to periodic inventory shortages or excesses
We typically operate our business with limited visibility of future demand. As a result, we sometimes experience inventory shortages or excesses. We generally order supplies and otherwise plan our production based on internal forecasts of demand. We have in the past, and may again in the future, fail to forecast accurately demand for our products, in terms of both volume and configuration for either our current or next-generation wire bonders. This has led to and may in the future lead to delays in product shipments or, alternatively, an increased risk of inventory obsolescence. If we fail to forecast accurately demand for our products, including assembly equipment and packaging materials, our business, financial condition and operating results may be materially and adversely affected.
Advanced packaging technologies other than wire bonding may render some of our products obsolete
Advanced packaging technologies have emerged that may improve device performance or reduce the size of an integrated circuit package, as compared to traditional die and wire bonding. These technologies include flip chip and chip scale packaging. Some of these advanced technologies eliminate the need for wires to establish the electrical connection between a die and its package. The semiconductor industry may, in the future, shift a significant part of its volume into advanced packaging technologies, such as those discussed above, which do not employ our products. If a significant shift to advanced packaging technologies were to occur, demand for our equipment and related packaging materials may be materially and adversely affected.
Because a small number of customers account for most of our sales, our revenues could decline if we lose a significant customer
The semiconductor manufacturing industry is highly concentrated, with a relatively small number of large semiconductor manufacturers and their subcontract assemblers and vertically integrated manufacturers of electronic
-6-
Table of Contents
systems purchasing a substantial portion of our semiconductor assembly equipment and packaging materials. Sales to a relatively small number of customers account for a significant percentage of our net sales. During fiscal 2006, 2005, and 2004, sales to Advanced Semiconductor Engineering, our largest customer accounted for 17%, 15% and 19%, respectively, of our net sales.
We expect that sales of our products to a small number of customers will continue to account for a high percentage of our net sales for the foreseeable future. Thus, our business success depends on our ability to maintain strong relationships with our important customers. Any one of a number of factors could adversely affect these relationships. If, for example, during periods of escalating demand for our equipment, we were unable to add inventory and production capacity quickly enough to meet the needs of our customers, they may turn to other suppliers making it more difficult for us to retain their business. Similarly, if we are unable for any other reason to meet production or delivery schedules, particularly during a period of escalating demand, our relationships with our key customers could be adversely affected. If we lose orders from a significant customer, or if a significant customer reduces its orders substantially, these losses or reductions may materially and adversely affect our business, financial condition and operating results.
We depend on a small number of suppliers for raw materials, components and subassemblies. If our suppliers do not deliver their products to us, we would be unable to deliver our products to our customers
Our products are complex and require raw materials, components and subassemblies having a high degree of reliability, accuracy and performance. We rely on subcontractors to manufacture many of these components and subassemblies and we rely on sole source suppliers for some important components and raw materials, including gold. As a result, we are exposed to a number of significant risks, including:
| • | lack of control over the manufacturing process for components and subassemblies; |
| • | Changes in our manufacturing processes, in response to changes in the market, which may delay our shipments; |
| • | our inadvertent use of defective or contaminated raw materials; |
| • | the relatively small operations and limited manufacturing resources of some of our suppliers, which may limit their ability to manufacture and sell subassemblies, components or parts in the volumes we require and at acceptable quality levels and prices; |
| • | reliability or quality problems with certain key subassemblies provided by single source suppliers as to which we may not have any short term alternative; |
| • | shortages caused by disruptions at our suppliers and subcontractors for a variety of reasons, including work stoppage or fire, earthquake, flooding or other natural disasters; |
| • | delays in the delivery of raw materials or subassemblies, which, in turn, may delay our shipments; and |
| • | the loss of suppliers as a result of consolidation of suppliers in the industry. |
If we are unable to deliver products to our customers on time for these or any other reasons; if we are unable to meet customer expectations as to cycle time; or if we do not maintain acceptable product quality or reliability, our business, financial condition and operating results may be materially and adversely affected.
Diversification into multiple businesses increases demands on our management and systems
We recently acquired Alphasem, a manufacturer of die bonders, and may from time to time in the future seek to expand through further acquisition. Significant acquisitions increase demands on management, financial resources and information and internal control systems. Our success will depend, in part, on our ability to manage and integrate acquired businesses with our existing businesses and to successfully implement, improve and expand our systems, procedures and controls. If we fail to integrate businesses successfully or to develop the necessary internal procedures to manage diversified businesses, our business, financial condition and operating results may be materially and adversely affected.
We may be unable to continue to compete successfully in the highly competitive semiconductor equipment and packaging materials industries
-7-
Table of Contents
The semiconductor equipment and packaging materials industries are very competitive. In the semiconductor equipment, significant competitive factors include performance, quality, customer support and price. In the semiconductor packaging materials industry, competitive factors include price, delivery and quality.
In each of our markets, we face competition and the threat of competition from established competitors and potential new entrants. In addition, established competitors may combine to form larger, better capitalized companies. Some of our competitors have or may have significantly greater financial, engineering, manufacturing and marketing resources than we have. Some of these competitors are Asian and European companies that have had and may continue to have an advantage over us in supplying products to local customers who appear to prefer to purchase from local suppliers, without regard to other considerations.
We expect our competitors to improve their current products’ performance, and to introduce new products and materials with improved price and performance characteristics. Our competitors may independently develop technology that is similar to or better than ours. New product and materials introductions by our competitors or by new market entrants could hurt our sales. If a particular semiconductor manufacturer or subcontract assembler selects a competitor’s product or materials for a particular assembly operation, we may not be able to sell products or materials to that manufacturer or assembler for a significant period of time because manufacturers and assemblers sometimes develop lasting relations with suppliers, and assembly equipment in our industry often goes years without requiring replacement. In addition, we may have to lower our prices in response to price cuts by our competitors, which may materially and adversely affect our business, financial condition and operating results. We cannot assure you that we will be able to continue to compete in these or other areas in the future. If we cannot compete successfully, we could be forced to reduce prices, and could lose customers and market share and experience reduced margins and profitability.
Our success depends in part on our intellectual property, which we may be unable to protect
Our success depends in part on our proprietary technology. To protect this technology, we rely principally on contractual restrictions (such as nondisclosure and confidentiality provisions) in our agreements with employees, subcontractors, vendors, consultants and customers and on the common law of trade secrets and proprietary “know-how.” We also rely, in some cases, on patent and copyright protection. We may not be successful in protecting our technology for a number of reasons, including the following:
| • | employees, subcontractors, vendors, consultants and customers may violate their contractual agreements, and the cost of enforcing those agreements may be prohibitive, or those agreements may be unenforceable or more limited than we anticipate; |
| • | foreign intellectual property laws may not adequately protect our intellectual property rights; |
| • | our patent and copyright claims may not be sufficiently broad to effectively protect our technology; our patents or copyrights may be challenged, invalidated or circumvented; or we may otherwise be unable to obtain adequate protection for our technology. |
In addition, our partners and alliances may also have rights to technology that we develop. We may incur significant expense to protect or enforce our intellectual property rights. If we are unable to protect our intellectual property rights, our competitive position may be weakened.
Third parties may claim we are infringing on their intellectual property, which could cause us to incur significant litigation costs or other expenses, or prevent us from selling some of our products
The semiconductor industry is characterized by rapid technological change, with frequent introductions of new products and technologies. Industry participants often develop products and features similar to those introduced by others, creating a risk that their products and processes may give rise to claims that they infringe on the intellectual property of others. We may unknowingly infringe on the intellectual property rights of others and incur significant liability for that infringement. If we are found to have infringed on the intellectual property rights of others, we could be enjoined from continuing to manufacture, market or use the affected product, or be required to obtain a license to continue manufacturing or using the affected product. A license could be very expensive to obtain or may not be available at all. Similarly, changing or re-engineering our products or processes to avoid infringing the rights of others may be costly, impractical or time consuming.
-8-
Table of Contents
Occasionally, third parties assert that we are, or may be, infringing on or misappropriating their intellectual property rights. In these cases, we will defend against claims or negotiate licenses where we consider these actions appropriate. Intellectual property cases are uncertain and involve complex legal and factual questions. If we become involved in this type of litigation, it could consume significant resources and divert our attention from our business.
We may be materially and adversely affected by environmental and safety laws and regulations
We are subject to various federal, state, local and foreign laws and regulations governing, among other things, the generation, storage, use, emission, discharge, transportation and disposal of hazardous material, investigation and remediation of contaminated sites and the health and safety of our employees. Increasingly, public attention has focused on the environmental impact of manufacturing operations and the risk to neighbors of chemical releases from such operations.
Proper waste disposal plays an important role in the operation of our manufacturing plants. In many of our facilities we maintain wastewater treatment systems that remove metals and other contaminants from process wastewater. These facilities operate under permits that must be renewed periodically. A violation of those permits may lead to revocation of the permits, fines, penalties or the incurrence of capital or other costs to comply with the permits, including potential shutdown of operations.
In the future, existing or new land use and environmental regulations may: (1) impose upon us the need for additional capital equipment or other process requirements, (2) restrict our ability to expand our operations, (3) subject us to liability for, among other matters, remediation, and/or (4) cause us to curtail our operations. We cannot assure you that any costs or liabilities associated with complying with these environmental laws will not materially and adversely affect our business, financial condition and operating results.
Anti-takeover provisions in our articles of incorporation and bylaws, and under Pennsylvania law may discourage other companies from attempting to acquire us
Some provisions of our articles of incorporation and bylaws as well as Pennsylvania law may discourage some transactions where we would otherwise experience a fundamental change. For example, our articles of incorporation and bylaws contain provisions that:
| • | Classify our board of directors into four classes, with one class being elected each year; |
| • | permit our board to issue “blank check” preferred stock without stockholder approval; and |
| • | Prohibit us from engaging in some types of business combinations with a holder of 20% or more of our voting securities without super-majority board or stockholder approval. |
Further, under the Pennsylvania Business Corporation Law, because our bylaws provide for a classified board of directors, stockholders may remove directors only for cause. These provisions and some other provisions of the Pennsylvania Business Corporation Law could delay, defer or prevent us from experiencing a fundamental change and may adversely affect our common stockholders’ voting and other rights.
Terrorist attacks, or other acts of violence or war may affect the markets in which we operate and our profitability
Terrorist attacks may negatively affect our operations. There can be no assurance that there will not be further terrorist attacks against the United States or United States businesses. Terrorist attacks or armed conflicts may directly impact our physical facilities or those of our suppliers or customers. Our primary facilities include administrative, sales and R&D facilities in the United States and manufacturing facilities in the United States, Singapore, Switzerland, China and Israel. Additional terrorist attacks may disrupt the global insurance and reinsurance industries with the result that we may not be able to obtain insurance at historical terms and levels for all of our facilities. Furthermore, additional attacks may make travel and the transportation of our supplies and products more difficult and more expensive and ultimately affect the sales of our products in the United States and overseas. Additional attacks or any broader conflict, could negatively impact on our domestic and international sales, our supply chain, our production capability and our ability to deliver products to our customers. Political and economic instability in some regions of the world could negatively impact our business. The consequences of terrorist attacks or armed conflicts are unpredictable, and we may not be able to foresee events that could have an adverse effect on our business.
-9-
Table of Contents
We may be unable to generate enough cash to repay our debt
Our ability to make payments on our indebtedness and to fund planned capital expenditures and other activities will depend on our ability to generate cash in the future. If our convertible debt is not converted to our common shares, we will be required to make annual cash interest payments of $1.3 million in each of fiscal years 2007 and 2008, $0.8 million in fiscal 2009 and $0.5 million in fiscal 2010 on our aggregate $195.0 million of convertible subordinated debt. Principal payments of $130.0 million and $65.0 million on the convertible subordinated debt are due in fiscal 2009 and 2010, respectively. Our ability to make payments on our indebtedness is affected by the volatile nature of our business, and general economic, competitive and other factors that are beyond our control. Our indebtedness poses risks to our business, including that:
| • | insufficient cash flow from operations to repay our outstanding indebtedness when it becomes due may force us to sell assets, or seek additional capital, which we may be unable to do at all or on terms favorable to us; and |
| • | our level of indebtedness may make us more vulnerable to economic or industry downturns. |
We cannot assure you that our business will generate cash in an amount sufficient to enable us to service interest, principal and other payments on our debt, including the notes, or to fund our other liquidity needs. We are not restricted under the agreements governing our existing indebtedness from incurring additional debt in the future. If new debt is added to our current levels, our leverage and our debt service obligations would increase and the related risks described above could intensify.
We have the ability to issue additional equity securities, which would lead to dilution of our issued and outstanding common stock
The issuance of additional equity securities or securities convertible into equity securities will result in dilution of existing stockholders’ equity interests in us. Our board of directors has the authority to issue, without vote or action of stockholders, shares of preferred stock in one or more series, and has the ability to fix the rights, preferences, privileges and restrictions of any such series. Any such series of preferred stock could contain dividend rights, conversion rights, voting rights, terms of redemption, redemption prices, liquidation preferences or other rights superior to the rights of holders of our common stock. In addition, we are authorized to issue, without stockholder approval, up to an aggregate of 200 million shares of common stock, of which approximately 57.2 million shares were outstanding as of September 30, 2006. We are also authorized to issue, without stockholder approval, securities convertible into either shares of common stock or preferred stock.
Weaknesses in our internal controls and procedures could result in material misstatements in our financial statements
Management is responsible for establishing and maintaining adequate internal control over financial reporting. Our internal controls over financial reporting are processes designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements in accordance with U.S. generally accepted accounting principles. A material weakness is a control deficiency, or combination of control deficiencies, that results in a more than remote likelihood that a material misstatement of annual or interim financial statements will not be prevented or detected.
Management determined that a material weaknesses in our internal control over financial reporting existed as of September 30, 2006. See Item 9A of the Company’s Report on Form 10-K— Controls and Procedures for a description of this material weakness.
We have begun to implement measures designed to remediate the material weakness in our internal controls by September 30, 2007 (See Item 9A of the Company’s Report on Form 10-K — Controls and Procedures). We cannot assure you as to when the remediation measures will be fully implemented, nor can we assure you that additional material weaknesses will not be identified by our management or independent accountants in the future. In addition, even after the remediation measures are fully implemented, our internal controls may not prevent all potential errors or fraud, because any control system, no matter how well designed and implemented, can only provide reasonable and not absolute assurance that the objectives of the control system will be achieved.
-10-
Table of Contents
We will not receive any proceeds from the sale of our common stock offered pursuant to this prospectus. The proceeds will be retained by the trust to fund the pension plan’s obligations to participants.
The selling securityholder will sell the shares offered hereby from time to time for the account of the pension plan in its capacity as trustee of the plan.
The following sets forth certain information concerning the selling securityholder:
| Name |
Shares Owned Prior to Offering |
Shares Offered | Shares Owned After Offering | |||||||
| Number | Percent(1) | Number | Percent(1) | |||||||
| Reliance Trust Company, Trustee 3384 Peachtree Road, N.E., Suite 900 Atlanta, GA 303261 |
200,000 | * | 200,000 | — | * | |||||
| * | Less than 1%. |
| (1) | Calculated based on Rule 13d-3(d)(1)(i) of the Exchange Act using 57,323,065 shares of common stock outstanding as of December 1, 2006. |
Information about the selling securityholder may change over time. Any changed information will be set forth to the extent provided to us by the selling securityholder, in prospectus supplements, if and when necessary.
Because the selling securityholder may offer all or some of the common stock from time to time, we cannot estimate the amount of the common stock that will be held by the selling securityholder upon the termination of any particular offering. See “Plan of Distribution.”
-11-
Table of Contents
Our authorized capital stock consists of 200 million shares of common stock, without par value, and 5 million shares of preferred stock, without par value. As of December 1, 2006, there were 57,323,065 shares of common stock and no shares of preferred stock outstanding. The following description of our capital stock is qualified in its entirety by reference to our articles of incorporation and bylaws, each as amended, and the description of our common stock contained in our registration statement on Form 8-A12G/A filed with the SEC, which has been incorporated by reference into this prospectus.
Common Stock
The holders of our common stock are entitled to one vote per share for each share held of record on all matters submitted to a vote of stockholders. Subject to preferential rights with respect to any series of preferred stock that may be issued, holders of our common stock are entitled to receive ratably such dividends as may be declared by the board of directors on the common stock out of funds legally available therefor and, in the event of a liquidation, dissolution or winding-up of our affairs, are entitled to share equally and ratably in all of our remaining assets and funds. In the election of directors, the holders of our common stock have cumulative rights, meaning that they may multiply the number of votes the stockholder is entitled to cast by the total number of directors to be elected at a meeting of stockholders and cast the whole number of votes for one candidate or distribute them among some or all candidates. The holders of the common stock have no preemptive rights or rights to convert shares of our common stock into any other securities and are not subject to future calls or assessments by us. All outstanding shares of our common stock are fully paid and nonassessable.
Preferred Stock
By resolution of the board of directors and without any further vote or action by the stockholders, we may issue preferred stock in one or more series and fix from time to time the number of shares to be included in each such series, and the designations, preferences, qualifications, limitations, restrictions and special or relative rights of the shares of each such series. Our ability to issue preferred stock, while providing flexibility in connection with possible acquisitions and other corporate purposes, could adversely affect the voting power of the holders of the common stock and could have the effect of making it more difficult for a person to acquire, or of discouraging a person from attempting to acquire, control of us. We have no present plans to issue any of the preferred stock.
Certain Charter Provisions
Some provisions of our articles of incorporation and bylaws and Pennsylvania law may discourage certain transactions involving a fundamental change of Kulicke & Soffa. For example, our articles of incorporation and bylaws contain provisions that (1) classify the board of directors into four classes, with one class being elected each year, (2) permit the board to issue “blank check” preferred stock without stockholder approval, as discussed above, and (3) prohibit us from engaging in certain business combinations with a holder of 20% or more of our voting securities without super-majority board or stockholder approval. Further, under the Pennsylvania Business Corporation Law, because our bylaws provide for a classified board of directors, stockholders may only remove directors for cause. These provisions and certain other provisions of the Pennsylvania Business Corporation Law could have the effect of delaying, deferring or preventing a fundamental change of Kulicke & Soffa and may adversely affect the voting and other rights of holders of common stock.
Transfer Agent and Registrar
American Stock Transfer and Trust Company is the transfer agent and registrar for our common stock, with offices in New York, New York.
-12-
Table of Contents
We have registered the common stock to allow the selling securityholder to sell the common stock to the public from time to time after the date of this prospectus. The selling securityholder may sell the common stock directly or through underwriters, broker-dealers or agents. If the selling securityholder sells the common stock through underwriters or broker-dealers, the selling securityholder will be responsible for underwriting discounts, concessions or commissions (which commissions will not exceed those customary in the types of transactions involved) or agents’ commissions. We have agreed to pay all of the expenses incidental to the registration, offering and sale of the common stock to the public other than commissions, fees and discounts of underwriters, brokers, dealers and agents.
We will not receive any portion of the proceeds of the sale of the common stock offered by this prospectus. The proceeds will, however, be used to fund our obligations under the pension plan.
The SEC may deem the selling securityholder and any broker-dealers or agents who participate in the distribution of the common stock to be “underwriters” within the meaning of Section 2(11) of the Securities Act. As a result, the SEC may deem any profits made by the selling securityholder as a result of selling the common stock and any discounts, commissions or concessions received by any broker-dealers or agents to be underwriting discounts and commissions under the Securities Act. Selling securityholders who are “underwriters” within the meaning of Section 2(11) of the Securities Act will be subject to the prospectus delivery requirements of the Securities Act and also may be subject to liabilities under the securities laws, including Sections 11, 12 and 17 of the Securities Act and Rule 10b-5 under the Exchange Act. To our knowledge, there are currently no plans, arrangements or understandings between the selling securityholder and any underwriter, broker-dealer or agent regarding the sale of the common stock.
The common stock may be sold pursuant to the methods described below from time to time by or for the account of the selling securityholder on the Nasdaq Global Market or otherwise in one or more transactions at:
| • | a fixed price or prices, which may be changed; |
| • | market prices prevailing at the time of sale; |
| • | prices related to prevailing market prices; or |
| • | prices determined on a negotiated or competitive bid basis. |
These sales may be effected by any one or more of the following methods:
| • | a block trade (which may involve crosses) in which the broker or dealer so engaged will attempt to sell the securities as agent but may position and resell a portion of the block as principal to facilitate the transaction; |
| • | purchases by a broker or dealer as principal; |
| • | ordinary brokerage transactions and transactions in which the broker solicits purchasers; or |
| • | privately negotiated transactions. |
In connection with sales of the common stock or otherwise, the selling securityholder may:
| • | enter into hedging transactions with broker-dealers, who may in turn engage in short sales of the securities in the course of hedging the positions they assume; |
| • | sell the securities short and deliver the securities to close out their short positions; or |
| • | loan or pledge the securities to broker-dealers, who may in turn sell the securities. |
To comply with the securities laws of some states, if applicable, the selling securityholder may only sell the common stock in these jurisdictions through registered or licensed brokers or dealers.
With respect to a particular offering of the common stock, to the extent required by law, we will file an accompanying prospectus supplement or, if appropriate, a post-effective amendment to the registration statement of which this prospectus is a part, disclosing the following information:
-13-
Table of Contents
| • | the amount of common stock being offered and sold; |
| • | the respective purchase prices and public offering prices and other material terms of the offering; |
| • | the names of any participating agents, broker-dealers or underwriters employed by the selling securityholder in connection with such sale; and |
| • | any applicable commissions, discounts, concessions and other items constituting compensation from the selling securityholder. |
Our common stock trades on the Nasdaq Global Market under the symbol “KLIC.”
We will indemnify the trustee against any and all claims, loss, damage, expense or liability arising from any action or failure to act in connection with the administration of the pension plan, except when due to the gross negligence or willful misconduct of the trustee.
-14-
Table of Contents
Drinker Biddle & Reath LLP, Philadelphia, Pennsylvania has provided us with an opinion as to the validity of the common stock offered by this prospectus.
The financial statements and management’s assessment of the effectiveness of internal control over financial reporting (which is included in Management’s Report on Internal Control over Financial Reporting) incorporated in this prospectus by reference to the Annual Report on Form 10-K for the year ended September 30, 2006 have been so incorporated in reliance on the report(s) of PricewaterhouseCoopers LLP, an independent registered public accounting firm, given on the authority of said firm as experts in auditing and accounting.
-15-
Table of Contents
WHERE YOU CAN FIND MORE INFORMATION
We have filed with the SEC a registration statement (including the exhibits, schedules and amendments to the registration statement) under the Securities Act for the common stock offered by this prospectus. This prospectus does not contain all of the information set forth in the registration statement, portions of which are omitted as permitted by the rules and regulations of the SEC. For further information pertaining to us and the common stock offered by this prospectus, please refer to the registration statement. Statements contained in this prospectus as to the contents of any contract, agreement or other document referred to, are not necessarily complete and, where the contract, agreement or other document is an exhibit to the registration statement, each statement is qualified in all respects by the provisions of the exhibit, to which reference is now made.
We file annual, quarterly and current reports, proxy statements, and other information with the SEC. These reports, proxy statements, and other information concerning us can be read and copied at the SEC’s Public Reference Room at 100 F. Street, N.E., Washington, D.C. 20549. Please call the SEC at 1-800-SEC-0330 for further information on the Public Reference Room. The SEC maintains an internet site at http://www.sec.gov that contains reports, proxy and information statements, and other information regarding issuers that file electronically with the SEC, including us. Our common stock is listed on the Nasdaq Global Market under the symbol “KLIC.” These reports, proxy statements, and other information are also available at the following Nasdaq address: Nasdaq Operations, 1735 K Street, N.W., Washington, D.C. 20006. We maintain a website with the address www.kns.com. We are not including the information contained on our website as part of, or incorporating it by reference into, this prospectus.
Any information in documents incorporated by reference into this prospectus is considered part of this prospectus. We incorporate by reference the documents listed below which have been filed with the SEC:
| • | Our Annual Report on Form 10-K for our fiscal year ended September 30, 2006; |
| • | Our Current Report on Form 8-K filed on December 20, 2006. |
| • | The description of our common stock contained in our registration statement on Form 8-A12G/A filed on July 17, 2000; and |
| • | Any future filings we make under Sections 13(a), 13(c), 14 or 15(d) of the Securities Exchange Act of 1934, including any filings after the date of this prospectus until we terminate this offering. |
Any statement contained in a document incorporated by reference into this prospectus will be modified or superseded for purposes of this prospectus to the extent that a statement contained in this prospectus or in any subsequently filed document that is incorporated by reference modifies or supersedes such statement. Any statement that is modified or superseded shall not, except as so modified or superseded, constitute a part of this prospectus.
There have been no material changes in our affairs since September 30, 2006 that have not been described in our Annual Report on Form 10-K for the fiscal year then ended, our Quarterly Reports on Form 10-Q, or our Current Reports on Form 8-K.
We will provide to you without charge, upon receipt of your written or oral request, a copy of any or all of the documents which are incorporated by reference into this prospectus, other than exhibits which are not specifically incorporated by reference into such documents. You should direct written or telephone requests to Investor Relations Department, Kulicke and Soffa Industries, Inc., 1005 Virginia Drive, Fort Washington, Pennsylvania 19034, telephone (215) 784-6000.
Our logo appearing on the front and back covers of this prospectus is a trademark of Kulicke and Soffa Industries, Inc.
-16-
Table of Contents
Table of Contents
PART II
INFORMATION NOT REQUIRED IN PROSPECTUS
ITEM 14. OTHER EXPENSES OF ISSUANCE AND DISTRIBUTION
The aggregate estimated (other than the registration fee) expenses to be paid by the registrant in connection with the sale of the common stock are as follows:
| Securities and Exchange Commission registration fee |
$ | 174.00 | |
| Printing and Engraving Expenses |
$ | 1,000.00 | |
| Trustee Fees and Expenses |
$ | 5,000.00 | |
| Accounting fees and expenses |
$ | 2,500.00 | |
| Legal fees and expenses |
$ | 10,000.00 | |
| Miscellaneous |
$ | 5,000.00 | |
| Total |
$ | 23,674.00 | |
ITEM 15. INDEMNIFICATION OF DIRECTORS AND OFFICERS
Our By-laws require us to indemnify any person who is or was a party or witness in any threatened, pending or completed action, suit or proceeding, regardless of whether the action, suit or proceeding was brought by a third party or by or in the right of the Company, by reason of the fact that he or she is or was a director or officer of the Company or is or was serving while a director or officer at our request as a director, officer, employee or agent of another corporation, partnership, joint venture, trust or other enterprise against expenses (including attorney’s fees), judgments, fines and amounts paid in settlement actually and reasonably incurred by him or her in connection with such proceeding, except to the extent such indemnification is prohibited by applicable law. Our By-laws provide that such persons are automatically entitled to advances from us for the payment of certain expenses incurred by such person upon receipt of an undertaking by or on behalf of the person to repay such advances if it is ultimately determined that the person is not entitled to indemnification by us. Notwithstanding anything to the contrary, we are not obligated to indemnify any person or advance expenses with respect to any action, suit or proceeding commenced by the person, other than mandatory counterclaims and affirmative defenses. The Company may indemnify employees and agents of the Company, and advance expenses to them, on the same basis as provided in our By-laws for directors and officers, as the board of directors of the Company may from time to time determine or authorize.
ITEM 16. EXHIBITS
(a) The following exhibits are furnished with this registration statement.
| EXHIBIT NUMBER |
ITEM | |
| 3(i) | The Company’s Form of Amended and Restated Articles of Incorporation dated June 14, 2002, filed as Exhibit 3.1 to the Company’s quarterly report on Form 10-Q for the quarterly period ended June 30, 2002, is incorporated herein by reference. | |
| 3(ii) | The Company’s By-Laws, as amended and restated on November 29, 2005, filed as Exhibit 3(ii) to the Company’s Form 10-K for the fiscal year ended September 30, 2005 are incorporated herein by reference. | |
| 4(i) | Specimen Common Share Certificate of Kulicke and Soffa Industries, Inc., filed as Exhibit 4 to the Company’s Form 8-A12G/A dated September 11, 1995, SEC file number 000-00121, is incorporated herein by reference. | |
| 5 | Opinion of Drinker Biddle & Reath LLP. | |
| 23(i) | Consent of PricewaterhouseCoopers LLP (Independent Registered Public Accounting Firm). | |
| 23(ii) | Consent of Drinker Biddle & Reath LLP (included in Exhibit 5). | |
| 24 | Power of Attorney (see page II-5 of this Form S-3). | |
Table of Contents
ITEM 17. UNDERTAKINGS
(a) The undersigned registrant hereby undertakes:
(1) To file, during any period in which offers or sales are being made, a post-effective amendment to this registration statement:
(i) To include any prospectus required by Section 10(a)(3) of the Securities Act of 1933;
(ii) To reflect in the prospectus any facts or events arising after the effective date of the registration statement (or the most recent post-effective amendment thereof) which, individually or in the aggregate, represent a fundamental change in the information set forth in the registration statement. Notwithstanding the foregoing, any increase or decrease in volume of securities offered (if the total dollar value of securities offered would not exceed that which was registered) and any deviation from the low or high and of the estimated maximum offering range may be reflected in the form of prospectus filed with the SEC pursuant to Rule 424(b), if, in the aggregate, the changes in volume and price represent no more than a 20 percent change in the maximum aggregate offering price set forth in the “Calculation of Registration Fee” table in the effective registration statement;
(iii) To include any material information with respect to the plan of distribution not previously disclosed in the registration statement or any material change to such information in the registration statement;
(2) That, for the purpose of determining any liability under the Securities Act of 1933, each such post-effective amendment shall be deemed to be a new registration statement relating to the securities offered therein, and the offering of such securities at that time shall be deemed to be the initial bona fide offering thereof.
(3) To remove from registration by means of a post-effective amendment any of the securities being registered which remain unsold at the termination of the offering.
(4) If the registrant is a foreign private issuer, to file a post-effective amendment to the registration statement to include any financial statements required by Section 210.3-19 of this chapter at the start of any delayed offering or throughout a continuous offering. Financial statements and information otherwise required by Section 10(a)(3) of the Act need not be furnished, provided that the registrant includes in the prospectus, by means of a post-effective amendment, financial statements required pursuant to this paragraph (a)(4) and other information necessary to ensure that all other information in the prospectus is at least as current as the date of those financial statements. Notwithstanding the foregoing, with respect to registration statements on Form F-3 (Section 239.33 of this chapter), a post-effective amendment need not be filed to include financial statements and information required by Section 10(a)(3) of the Act or Section 210.3-19 of this chapter if such financial statements and information are contained in periodic reports filed with or furnished to the Commission by the registrant pursuant to section 13 or section 15(d) of the Securities Exchange Act of 1934 that are incorporated by reference in the Form F-3.
(5) That, for the purpose of determining liability under the Securities Act of 1933 to any purchaser:
(i) If the registrant is relying on Rule 430B:
(A) Each prospectus filed by the registrant pursuant to Rule 424(b)(3) shall be deemed to be part of the registration statement as of the date the filed prospectus was deemed part of and included in the registration statement; and
(B) Each prospectus required to be filed pursuant to Rule 424(b)(2), (b)(5), or (b)(7) as part of a registration statement in reliance on Rule 430B relating to an offering made pursuant to Rule 415(a)(1)(i), (vii), or (x) for the purpose of providing the information required by section 10(a) of the Securities Act of 1933 shall be deemed to be part of and included in the registration statement as of the earlier of the date such form of prospectus is first used after effectiveness or the date of the first contract of sale of securities in the offering described in the prospectus. As provided in Rule 430B, for liability purposes of the issuer and any person that is at that date an underwriter, such date shall be deemed to be a new effective date of the registration statement relating to the securities in the registration statement to which that prospectus relates, and the offering of such securities at that time shall be deemed to be the initial bona fide offering thereof. Provided,
II-2
Table of Contents
however, that no statement made in the registration statement or prospectus that is part of the registration statement or made in a document incorporated or deemed incorporated by reference into the registration statement or prospectus that is part of the registration statement will, as to a purchaser with a time of contract of sale prior to such effective date, supersede or modify any statement that was made in the registration statement or prospectus that was part of the registration statement or made in any such document immediately prior to such effective date; or
(ii) If the registrant is subject to Rule 430C, each prospectus filed pursuant to Rule 424(b) as part of a registration statement relating to an offering, other than registration statements relying on Rule 430B or other than prospectuses filed in reliance on Rule 430A, shall be deemed to be part of and included in the registration statement as of the date it is first used after effectiveness. Provided, however, that no statement made in a registration statement or prospectus that is part of the registration statement or made in a document incorporated or deemed incorporated by reference into the registration statement or prospectus that is part of the registration statement will, as to a purchaser with a time of contract of sale prior to such first use, supersede or modify any statement that was made in the registration statement or prospectus that was part of the registration statement or made in any such document immediately prior to such date of first use.
(6) That, for the purpose of determining any liability of the registrant under the Securities Act of 1933 to any purchaser in the initial distribution of the securities:
The undersigned registrant undertakes that in a primary offering of securities of the undersigned registrant pursuant to this registration statement, regardless of the underwriting method used to sell the securities to the purchaser, if the securities are offered or sold to such purchaser by means of any of the following communications, the undersigned registrant will be a seller to the purchaser and will be considered to offer or sell such securities to such purchaser:
(i) Any preliminary prospectus or prospectus of the undersigned registrant relating to the offering required to be filed pursuant to Rule 424;
(ii) Any free writing prospectus relating to the offering prepared by or on behalf of the undersigned registrant or used or referred to by the undersigned registrant;
(iii) The portion of any other free writing prospectus relating to the offering containing material information about the undersigned registrant or its securities provided by or on behalf of the undersigned registrant; and
(iv) Any other communication that is an offer in the offering made by the undersigned registrant to the purchaser.
(b) The undersigned registrant hereby further undertakes that, for the purposes of determining any liability under the Securities Act of 1933, each filing of the registrant’s annual report pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934 (and, where applicable, each filing of an employee benefit plan’s annual report pursuant to Section 15(d) of the Securities Exchange Act of 1934) that is incorporated by reference in this registration statement shall be deemed to be a new registration statement relating to the securities offered therein, and the offering of such securities at that time shall be deemed to be the initial bona fide offering thereof.
(c) Insofar as indemnification for liabilities arising under the Securities Act of 1933 may be permitted to directors, officers and controlling persons of the registrant pursuant to the foregoing provisions, or otherwise, the registrant has been advised that in the opinion of the Securities and Exchange Commission such indemnification is against public policy as expressed in the Act and is, therefore, unenforceable. In the event that a claim for indemnification against such liabilities (other than the payment by the registrant of expenses incurred or paid by a director, officer or controlling person of the registrant in the successful defense of any action, suit or proceeding) is asserted by such director, officer or controlling person in connection with the securities being registered, the registrant will, unless in the opinion of its counsel the matter has been settled by controlling precedent, submit to a court of appropriate jurisdiction the question whether such indemnification by it is against public policy as expressed in the Act and will be governed by the final adjudication of such issue.
(d) The undersigned registrant hereby further undertakes that:
(1) For purposes of determining any liability under the Securities Act of 1933, the information omitted from the form of prospectus filed as part of this Registration Statement in reliance upon Rule 430A and contained in a form of prospectus filed by the Registrant pursuant to Rule 424(b)(1) or (4) or 497(h) under the Securities Act shall be deemed to be part of this Registration Statement as of the time is was declared effective; and
II-3
Table of Contents
(2) For purposes of determining any liability under the Securities Act of 1933, each post-effective amendment that contains a form of prospectus shall be deemed to be a new registration statement relating to the securities offered therein, and the offering of such securities at that time shall be deemed to be the initial bona fide offering thereof.
II-4
Table of Contents
SIGNATURES
Pursuant to the requirements of the Securities Act of 1933, the registrant certifies that it has reasonable grounds to believe that it meets all of the requirements for filing on Form S-3 and has duly caused this registration statement to be signed on its behalf by the undersigned, thereunto duly authorized, in the city of Fort Washington, Commonwealth of Pennsylvania, on December 20, 2006.
| KULICKE AND SOFFA INDUSTRIES, INC. | ||
| By: | /s/ Maurice E. Carson | |
| Maurice E. Carson | ||
| Vice President and Chief Financial Officer | ||
Power of Attorney
KNOW ALL PERSONS BY THESE PRESENTS, that each of the undersigned directors and officers of Kulicke and Soffa Industries, Inc. hereby severally constitutes and appoints C. Scott Kulicke and Maurice E. Carson, and each of them acting individually, as his true and lawful attorneys-in-fact and agents, each with full power of substitution for him in any and all capacities, to sign any and all amendments to this Registration Statement on Form S-3 (including post-effective amendments) and any subsequent registration statement filed by Kulicke and Soffa Industries, Inc. pursuant to Rule 462(b) of the Securities Act of 1933, and to file the same, with exhibits thereto and other documents in connection therewith, with the Securities and Exchange Commission, granting unto said attorneys-in-fact and agents, and each of them, full power and authority to do and perform each and every act and thing requisite and necessary to be done in and about the premises, as fully to all intents and purposes as he might or could do in person, hereby ratifying and confirming all that each of said attorneys-in-fact, or any substitute, may do or cause to be done by virtue hereof.
Pursuant to the requirements of the Securities Act of 1933, this registration statement has been signed by the following persons in the capacities and on the dates indicated.
| NAME |
CAPACITY |
DATE | ||
| /s/ C. Scott Kulicke C. Scott Kulicke |
Chairman and Chief Executive Officer (Principal Executive Officer) |
December 20, 2006 | ||
| /s/ Maurice E. Carson Maurice E. Carson |
Vice President and Chief Financial Officer (Principal Financial and Accounting Officer) |
December 20, 2006 | ||
| /s/ Brian R. Bachman Brian R. Bachman |
Director | December 20, 2006 | ||
| /s/ John A. O’Steen John A. O’Steen |
Director | December 20, 2006 | ||
| /s/ Garrett E. Pierce Garrett E. Pierce |
Director | December 20, 2006 | ||
| /s/ MacDonell Roehm, Jr. MacDonell Roehm, Jr. |
Director | December 20, 2006 | ||
| /s/ Barry Waite Barry Waite |
Director | December 20, 2006 | ||
| /s/ C. William Zadel C. William Zadel |
Director | December 20, 2006 | ||
II-5
Table of Contents
EXHIBIT INDEX
| EXHIBIT NUMBER |
ITEM | |
| 3(i) | The Company’s Form of Amended and Restated Articles of Incorporation dated June 14, 2002, filed as Exhibit 3.1 to the Company’s quarterly report on Form 10-Q for the quarterly period ended June 30, 2002, is incorporated herein by reference. | |
| 3(ii) | The Company’s By-Laws, as amended and restated on November 29, 2005, filed as Exhibit 3(ii) to the Company’s Form 10-K for the fiscal year ended September 30, 2005 are incorporated herein by reference. | |
| 4(i) | Specimen Common Share Certificate of Kulicke and Soffa Industries, Inc., filed as Exhibit 4 to the Company’s Form 8-A12G/A dated September 11, 1995, SEC file number 000-00121, is incorporated herein by reference. | |
| 5 | Opinion of Drinker Biddle & Reath LLP. | |
| 23(i) | Consent of PricewaterhouseCoopers LLP (Independent Registered Public Accounting Firm). | |
| 23(ii) | Consent of Drinker Biddle & Reath LLP (included in Exhibit 5). | |
| 24 | Power of Attorney (see page II-5 of this Form S-3). | |
II-6