Document
 
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM 10-Q
þ
QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the quarterly period ended September 30, 2018
OR
o
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
for the transition period from                      To                     
Commission File Number 001-12505
CORE MOLDING TECHNOLOGIES, INC.
___________________________________________________________________________________
(Exact name of registrant as specified in its charter)
Delaware
 
31-1481870
(State or other jurisdiction
incorporation or organization)
 
(I.R.S. Employer Identification No.)
800 Manor Park Drive, Columbus, Ohio
 
43228-0183
(Address of principal executive office)
 
(Zip Code)
Registrant’s telephone number, including area code (614) 870-5000
N/A
_______________________________________________________________
Former name, former address and former fiscal year, if changed since last report.
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes þ No o
Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes þ No o
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See definition of “accelerated filer,” “large accelerated filer,” and “smaller reporting company,” in Rule 12b-2 of the Exchange Act (Check one).
Large accelerated filer o
 
Accelerated filer þ
 
Non-accelerated filer o
 
Smaller reporting company o
 
 
 
 
(Do not check if a smaller reporting company)
 
Emerging growth company o
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. o
Indicate by check mark whether the registrant is a shell company as defined in Rule 12b-2 of the Exchange Act. Yes o No þ
As of November 8, 2018, the latest practicable date, 8,098,983 shares of the registrant’s common stock were issued and outstanding.
 



Table of Contents


 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 


2

Table of Contents

Item 1. Financial Statements
Part I — Financial Information
Core Molding Technologies, Inc. and Subsidiaries
Consolidated Statements of Income (Loss)
(Unaudited)

 
Three Months Ended

Nine Months Ended
 
September 30,

September 30,
 
2018

2017

2018
 
2017
Net sales:
 
 

 
 
 
 
Products
$
62,305,000

 
$
37,593,000

 
$
187,243,000

 
$
110,723,000

Tooling
2,371,000

 
901,000

 
9,081,000

 
11,885,000

Total net sales
64,676,000

 
38,494,000

 
196,324,000

 
122,608,000

 
 
 
 
 
 
 
 
Total cost of sales
59,814,000

 
32,742,000

 
175,679,000

 
103,037,000

 
 
 
 
 
 
 
 
Gross margin
4,862,000


5,752,000


20,645,000


19,571,000

 
 
 
 
 
 
 
 
Total selling, general and administrative expense
6,349,000

 
4,358,000

 
19,587,000

 
12,450,000

 
 
 
 
 
 
 
 
Operating Income (Loss)
(1,487,000
)
 
1,394,000

 
1,058,000

 
7,121,000

 
 
 
 
 
 
 
 
Other income and expense
 
 
 
 
 
 
 
Interest expense
632,000

 
62,000

 
1,705,000

 
191,000

Net periodic post-retirement benefit
(12,000
)
 
(12,000
)
 
(36,000
)
 
(36,000
)
Total other income and expense
620,000

 
50,000

 
1,669,000

 
155,000

 
 
 
 
 
 
 
 
Income (Loss) before taxes
(2,107,000
)
 
1,344,000

 
(611,000
)
 
6,966,000

 
 
 
 
 
 
 
 
Income tax expense (benefit)
(304,000
)

489,000


228,000


2,262,000

 
 
 
 
 
 
 
 
Net income (loss)
$
(1,803,000
)

$
855,000


$
(839,000
)

$
4,704,000

 
 
 
 
 
 
 
 
Net income (loss) per common share:
 
 
 
 
 
 
 
Basic
$
(0.23
)

$
0.11


$
(0.11
)

$
0.61

Diluted
$
(0.23
)

$
0.11


$
(0.11
)

$
0.61

Weighted average shares outstanding:
 
 
 
 
 
 
 
Basic
7,804,000


7,711,000


7,758,000


7,683,000

Diluted
7,804,000


7,757,000


7,758,000


7,739,000

See notes to unaudited consolidated financial statements.


3

Table of Contents


Core Molding Technologies, Inc. and Subsidiaries
Consolidated Statements of Comprehensive Income (Loss)
(Unaudited)

 
Three Months Ended
 
Nine Months Ended
 
September 30,
 
September 30,
 
2018
 
2017
 
2018
 
2017
Net income (loss)
$
(1,803,000
)
 
$
855,000

 
$
(839,000
)
 
$
4,704,000

 
 
 
 
 
 
 
 
Other comprehensive income (loss):
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Foreign currency hedging derivatives:
 
 
 
 
 
 
 
Unrealized hedge gain (loss)
907,000

 
(139,000
)
 
561,000

 
657,000

Income tax (expense) benefit
(202,000
)
 
48,000

 
(156,000
)
 
(223,000
)
 
 
 
 
 
 
 
 
Interest rate swaps:
 
 
 
 
 
 
 
Unrealized hedge gain
175,000

 

 
424,000

 

Income tax benefit (expense)
(40,000
)
 

 
(97,000
)
 

 
 
 
 
 
 
 
 
Post retirement benefit plan adjustments:
 
 
 
 
 
 
 
Net actuarial loss
43,000

 
37,000

 
129,000

 
112,000

Prior service costs
(124,000
)
 
(124,000
)
 
(372,000
)
 
(372,000
)
   Income tax benefit
17,000

 
26,000

 
51,000

 
78,000

 
 
 
 
 
 
 
 
Comprehensive income (loss)
$
(1,027,000
)
 
$
703,000

 
$
(299,000
)
 
$
4,956,000

See notes to unaudited consolidated financial statements.

4

Table of Contents

Core Molding Technologies, Inc. and Subsidiaries
Consolidated Balance Sheets
 
September 30, 2018
 
December 31,
 
(Unaudited)
 
2017
Assets:
 
 
 
Current assets:
 
 
 
Cash and cash equivalents
$

 
$
26,780,000

Accounts receivable, net
38,666,000

 
19,846,000

Inventory, net
22,648,000

 
13,459,000

Prepaid expenses and other current assets
8,123,000

 
4,870,000

Total current assets
69,437,000

 
64,955,000

 
 
 
 
Property, plant and equipment, net
80,822,000

 
68,631,000

Goodwill
22,957,000

 
2,403,000

Intangibles, net
16,666,000

 
513,000

Other non-current assets
2,184,000

 
2,076,000

Total Assets
$
192,066,000

 
$
138,578,000

 
 
 
 
Liabilities and Stockholders’ Equity:
 
 
 
Current liabilities:
 
 
 
Current portion of long-term debt
3,230,000

 
3,000,000

Accounts payable
29,066,000

 
13,850,000

Compensation and related benefits
5,071,000

 
3,524,000

Accrued other liabilities
4,940,000

 
4,212,000

Total current liabilities
42,307,000

 
24,586,000

 
 
 
 
Long-term debt
38,591,000

 
3,750,000

Deferred tax liability
395,000

 
395,000

Post retirement benefits liability
7,924,000

 
7,954,000

Total Liabilities
$
89,217,000

 
$
36,685,000

Commitments and Contingencies

 

Stockholders’ Equity:
 
 
 
Preferred stock — $0.01 par value, authorized shares — 10,000,000; no shares outstanding at September 30, 2018 and December 31, 2017

 

Common stock — $0.01 par value, authorized shares – 20,000,000; outstanding shares: 7,771,415 at September 30, 2018 and 7,711,277 December 31, 2017
78,000

 
77,000

Paid-in capital
32,693,000

 
31,465,000

Accumulated other comprehensive income, net of income taxes
2,609,000

 
2,070,000

Treasury stock - at cost, 3,790,308 at September 30, 2018 and 3,773,128 at December 31, 2017
(28,403,000
)
 
(28,153,000
)
Retained earnings
95,872,000

 
96,434,000

Total Stockholders’ Equity
102,849,000

 
101,893,000

Total Liabilities and Stockholders’ Equity
$
192,066,000

 
$
138,578,000

See notes to unaudited consolidated financial statements.

5

Table of Contents

Core Molding Technologies, Inc. and Subsidiaries
Consolidated Statement of Stockholders’ Equity
(Unaudited)

 
Common Stock
Outstanding
 
Paid-In
Capital
 
Accumulated
Other
Comprehensive
Income
 
Treasury Stock
 
Retained
Earnings
 
Total
Stockholders’
Equity
 
Shares
 
Amount
 
 
 
 
Balance at December 31, 2017, as previously reported
7,711,277

 
$
77,000

 
$
31,465,000

 
$
2,070,000

 
$
(28,153,000
)
 
$
96,434,000

 
$
101,893,000

Impact of change in accounting policy (See Note 2)
 
 
 
 
 
 
 
 
 
 
1,069,000

 
1,069,000

Balance at January 1, 2018
7,711,277

 
$
77,000

 
$
31,465,000

 
$
2,070,000

 
$
(28,153,000
)
 
$
97,503,000

 
$
102,962,000

Net loss
 
 
 
 
 
 
 
 
 
 
(839,000
)
 
(839,000
)
Cash dividends paid
 
 
 
 
 
 
 
 
 
 
(792,000
)
 
(792,000
)
Change in post retirement benefits, net of tax benefit of $51,000
 
 
 
 
 
 
(192,000
)
 
 
 
 
 
(192,000
)
Unrealized foreign currency hedge gain, net of tax of $156,000
 
 
 
 
 
 
404,000

 
 
 
 
 
404,000

Change in interest rate swaps, net of tax of $97,000
 
 
 
 
 
 
327,000

 
 
 
 
 
327,000

Purchase of treasury stock
(17,180
)
 
 
 
 
 
 
 
(250,000
)
 
 
 
(250,000
)
Restricted stock vested
77,318

 
1,000

 
 
 
 
 
 
 
 
 
1,000

Share-based compensation
 
 
 
 
1,228,000

 
 
 
 
 
 
 
1,228,000

Balance at September 30, 2018
7,771,415

 
$
78,000

 
$
32,693,000

 
$
2,609,000

 
$
(28,403,000
)
 
$
95,872,000

 
$
102,849,000

See notes to unaudited consolidated financial statements.


6

Table of Contents

Core Molding Technologies, Inc. and Subsidiaries
Consolidated Statements of Cash Flows
(Unaudited)
 
Nine Months Ended
 
September 30,
 
2018
 
2017
Cash flows from operating activities:
 
 
 
Net income (loss)
$
(839,000
)
 
$
4,704,000

 
 
 
 
Adjustments to reconcile net income (loss) to net cash provided by operating activities:
 
 
 
Depreciation and amortization
7,105,000

 
4,814,000

Loss on disposal of assets
6,000

 

Share-based compensation
1,228,000

 
1,061,000

Loss on foreign currency translation
14,000

 
29,000

Change in operating assets and liabilities, net of effects of acquisition:

 
 
Accounts receivable
(12,528,000
)
 
(4,742,000
)
Inventories
(2,265,000
)
 
(1,882,000
)
Prepaid and other assets
3,060,000

 
(1,544,000
)
Accounts payable
13,272,000

 
3,062,000

Accrued and other liabilities
(2,255,000
)
 
(684,000
)
Post retirement benefits liability
(274,000
)
 
(289,000
)
Net cash provided by operating activities
6,524,000

 
4,529,000

 
 
 
 
Cash flows from investing activities:
 
 
 
Purchase of property, plant and equipment
(4,761,000
)
 
(2,259,000
)
Purchase of assets of Horizon Plastics
(62,457,000
)
 

Net cash used in investing activities
(67,218,000
)
 
(2,259,000
)
 
 
 
 
Cash flows from financing activities:
 
 
 
Gross repayments on revolving line of credit
(67,594,000
)
 

Gross borrowings on revolving line of credit
67,594,000

 

Proceeds from term loan
45,000,000

 

Payment of principal on term loans
(9,281,000
)
 
(2,250,000
)
Payment of deferred loan costs
(763,000
)
 

Cash dividends paid
(792,000
)
 
(393,000
)
Payments related to the purchase of treasury stock
(250,000
)
 
(372,000
)
Net cash provided by (used in) financing activities
33,914,000

 
(3,015,000
)
 
 
 
 
Net change in cash and cash equivalents
(26,780,000
)
 
(745,000
)
 
 
 
 
Cash and cash equivalents at beginning of period
26,780,000

 
28,285,000

 
 
 
 
Cash and cash equivalents at end of period
$

 
$
27,540,000

 
 
 
 
Cash paid for:
 
 
 
Interest (net of amounts capitalized)
$
1,612,000

 
$
193,000

Income taxes
$
848,000

 
$
2,394,000

Non Cash:
 
 
 
Fixed asset purchases in accounts payable
$
344,000

 
$
343,000

See notes to unaudited consolidated financial statements.

7

Table of Contents

Core Molding Technologies, Inc. and Subsidiaries
Notes to Consolidated Financial Statements
(Unaudited)

1. BASIS OF PRESENTATION

The accompanying unaudited consolidated financial statements have been prepared in accordance with the instructions to Form 10-Q and include all of the information and disclosures required by accounting principles generally accepted in the United States of America for interim reporting, which are less than those required for annual reporting. In the opinion of management, the accompanying unaudited consolidated financial statements contain all adjustments (all of which are normal and recurring in nature) necessary to present fairly the financial position of Core Molding Technologies, Inc. and its subsidiaries (“Core Molding Technologies” or the “Company”) at September 30, 2018, and the results of operations and cash flows for the nine months ended September 30, 2018. The Company has reclassified certain prior-year amounts to conform to the current-year's presentation. The “Notes to Consolidated Financial Statements” contained in the Company's 2017 Annual Report to Shareholders, should be read in conjunction with these consolidated financial statements.

Core Molding Technologies is a manufacturer of sheet molding compound ("SMC") and molder of thermoset and thermoplastic products. The Company produces high quality molded products, assemblies and SMC materials for varied markets, including medium and heavy-duty trucks, automotive, marine, home improvement, water management, agriculture, construction and other commercial markets. The Company offers customers a wide range of manufacturing processes to fit various program volume and investment requirements. These processes include compression molding of SMC, bulk molding compounds (BMC), resin transfer molding (RTM), liquid molding of dicyclopentadiene (DCPD), spray-up and hand-lay-up, glass mat thermoplastics (GMT), direct long-fiber thermoplastics (D-LFT) and structural foam and web injection molding. Core Molding Technologies has its headquarters in Columbus, Ohio, and operates production facilities in Columbus and Batavia, Ohio; Gaffney, South Carolina; Winona, Minnesota; Matamoros and Escobedo, Mexico; and Cobourg, Ontario, Canada.

2. CRITICAL ACCOUNTING POLICIES AND ESTIMATES
The preparation of these consolidated financial statements requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and the disclosure of contingent assets and liabilities at the date of the consolidated financial statements and the reported amounts of revenues and expenses during the reporting period. On an on-going basis, management evaluates its estimates and judgments. Management bases its estimates and judgments on historical experience and on various other factors that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying value of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions.
Management believes the following critical accounting policies, among others, affect its more significant judgments and estimates used in the preparation of its consolidated financial statements.
Revenue Recognition: The Company historically has recognized revenue from two streams, product revenue and tooling revenue. Product revenue is earned from the manufacture and sale of sheet molding compound and thermoset and thermoplastic products. Revenue from product sales is generally recognized as products are shipped, as the Company transfers title and risk of ownership to the customer and is entitled to payment upon shipment. In limited circumstances, the Company recognizes revenue from product sales when products are produced and the customer takes title and risk of ownership at our production facility.
Tooling revenue is earned from manufacturing multiple tools, molds and assembly equipment as part of a tooling program for a customer. Given that the Company is providing a significant service of producing highly interdependent component parts of the tooling program, each tooling program consists of a single performance obligation to provide the customer the capability to produce a single product. Based on the arrangement with the customer, the Company recognizes revenue either at a point in time or over time. When the Company does not have an enforceable right to payment, the Company recognizes tooling revenue at a point in time. In such cases, the Company recognizes revenue upon customer acceptance, which is when the customer has legal title to the tools. The Company historically recognized all tooling revenue at a point in time, upon customer acceptance, before the adoption of ASU 2014-09.
Certain tooling programs include an enforceable right to payment. In those cases, the Company recognizes revenue over time based on the extent of progress towards completion of its performance obligation. The Company uses a cost-to-cost measure of progress for such contracts because it best depicts the transfer of value to the customer and also correlates with the amount of consideration to which the entity expects to be entitled in exchange for transferring the promised goods or services to the customer.

8

Table of Contents

Under the cost-to-cost measure of progress, progress towards completion is measured based on the ratio of costs incurred to date to the total estimated costs at completion of the performance obligation. Revenues are recorded proportionally as costs are incurred.
Income taxes: The Company’s consolidated balance sheets include a net non-current deferred tax liability of $395,000 at September 30, 2018 and December 31, 2017. The Company evaluates the balance of deferred tax assets that will be realized based on the premise that the Company is more likely than not to realize deferred tax benefits through the generation of future taxable income. For more information, refer to Note 11 of the Notes to Consolidated Financial Statements contained in the Company's 2017 Annual Report to Shareholders on Form 10-K.
Accounts receivable allowances: Management maintains allowances for doubtful accounts for estimated losses resulting from the inability of its customers to make required payments. If the financial condition of the Company’s customers were to deteriorate, resulting in an impairment of their ability to make payments, additional allowances may be required. The Company recorded an allowance for doubtful accounts of $18,000 and zero at September 30, 2018 and December 31, 2017, respectively. Management also records estimates for chargebacks for customer returns and deductions, discounts offered to customers, and price adjustments. Should customer chargebacks fluctuate from the estimated amounts, additional allowances may be required. The Company reduced accounts receivable for chargebacks by $2,163,000 at September 30, 2018 and $857,000 at December 31, 2017.
Inventories: Inventories, which include material, labor and manufacturing overhead, are valued at the lower of cost or net realizable value. The inventories are accounted for using the first-in, first-out (FIFO) method of determining inventory costs. Inventory quantities on-hand are regularly reviewed, and where necessary, provisions for excess and obsolete inventory are recorded based on historical and anticipated usage. The Company has recorded an allowance for slow moving and obsolete inventory of $715,000 at September 30, 2018 and $624,000 at December 31, 2017.
Contract Assets/Liabilities: Contract assets and liabilities represent the net cumulative customer billings, vendor payments and revenue recognized for tooling programs. For tooling programs where net revenue recognized and vendor payments exceed customer billings, the Company recognizes a contract asset. For tooling programs where net customer billings exceed revenue recognized and vendor payments, the Company recognizes a contract liability. Customer payment terms vary by contract and can range from progress payments based on work performed or one single payment once the contract is completed. Contract assets are generally classified as current. The Company has recorded contract assets in prepaid expenses and other current assets on the Consolidated Balance Sheet. During the nine months ended September 30, 2018, the Company recognized no impairments on contract assets. Contract liabilities are also generally classified as current. The Company has recorded contract liabilities in other current liabilities on the Consolidated Balance Sheet. For the nine months ended September 30, 2018, the Company recognized revenue of $561,000 related to contract liabilities.
Derivative instruments: Derivative instruments are utilized to manage exposure to fluctuations in foreign currency exchange rates and interest rates on long term debt obligations. All derivative instruments are formally documented as cash flow hedges and are recorded at fair value at each reporting period. Gains and losses related to currency forward contracts and interest rate swaps are deferred and recorded as a component of Accumulated Other Comprehensive Income in the Consolidated Statement of Stockholders' Equity and then subsequently recognized in the Consolidated Statement of Income when the hedged item affects net income. The ineffective portion of the change in fair value of a hedge, if any, is recognized in income immediately. For additional information on derivative instruments, see Note 14.
Long-Lived Assets: Long-lived assets consist primarily of property, plant and equipment and definite-lived intangibles. The recoverability of long-lived assets is evaluated by an analysis of operating results and consideration of other significant events or changes in the business environment. The Company evaluates whether impairment exists for property, plant and equipment on the basis of undiscounted expected future cash flows from operations before interest. There was no impairment of the Company's long-lived assets for the nine months ended September 30, 2018 or September 30, 2017.
Goodwill and Other Intangibles: The Company evaluates goodwill annually on December 31st to determine whether impairment exists, or at interim periods if an indicator of possible impairment exists. The Company evaluates goodwill for impairment utilizing the one-step qualitative assessment. The Company considers relevant events and circumstances that affect the fair value or carrying amount of the Company. Such events and circumstances could include macroeconomic conditions, industry and market conditions, cost factors, overall financial performance, entity specific events and capital markets pricing. The Company places more weight on the events and circumstances that most affect the Company's fair value or carrying amount. These factors are all considered by management in reaching its conclusion about whether to perform the first step of the impairment test.

If the Company's fair value is determined to be more likely than not impaired based on the one-step qualitative approach, a quantitative valuation to estimate the fair value of the Company is performed. Fair value measurements are based on a projected discounted cash flow valuation model, in accordance with ASC 350, “Intangibles-Goodwill and Other.”


9

Table of Contents

There was no impairment of the Company's goodwill for the year ended December 31, 2017, and no indicators of impairment for the nine months ended September 30, 2018.
Self-Insurance: The Company is self-insured with respect to its Columbus and Batavia, Ohio, Gaffney, South Carolina, Winona, Minnesota and Brownsville, Texas medical, dental and vision claims and Columbus and Batavia, Ohio workers’ compensation claims, all of which are subject to stop-loss insurance thresholds. The Company is also self-insured for dental and vision with respect to its Cobourg, Canada location. The Company has recorded an estimated liability for self-insured medical, dental, vision and worker’s compensation claims incurred but not reported at September 30, 2018 and December 31, 2017 of $949,000 and $862,000, respectively.
Post-retirement benefits: Management records an accrual for post-retirement costs associated with the health care plan sponsored by Core Molding Technologies. Should actual results differ from the assumptions used to determine the reserves, additional provisions may be required. In particular, increases in future healthcare costs above the assumptions could have an adverse effect on Core Molding Technologies’ operations. The effect of a change in healthcare costs is described in Note 12 of the Notes to Consolidated Financial Statements contained in the Company's 2017 Annual Report to Shareholders on Form 10-K. Core Molding Technologies had a liability for post retirement healthcare benefits based on actuarially computed estimates of $9,020,000 at September 30, 2018 and $9,050,000 at December 31, 2017.

3. RECENT ACCOUNTING PRONOUNCEMENTS

In May 2014, the Financial Accounting Standards Board (“FASB”) issued Accounting Standards Update (“ASU”) No. 2014-09, Revenue from Contracts with Customers (Topic 606), which supersedes the revenue recognition requirements in ASC 605, Revenue Recognition. ASC Topic 606 is based on the principle that revenue is recognized to depict the transfer of goods or services to customers in an amount that reflects the consideration to which the entity expects to be entitled in exchange for those goods or services. ASC Topic 606 also requires additional disclosure about the nature, amount, timing and uncertainty of revenue and cash flows arising from customer contracts, including significant judgments and changes in judgments and assets recognized from costs incurred to obtain or fulfill a contract. The effective date for ASC Topic 606, as updated by ASU No. 2015-14, is the first quarter of fiscal year 2018. ASU 2014-09 affects the timing of certain revenue-related transactions primarily resulting from the earlier recognition of the Company's tooling sales and costs. The Company adopted this update as required through a cumulative adjustment to equity and contract assets of $1,069,000 on January 1, 2018. The transitional practical expedient related to contract modifications has been applied and the Company has not retrospectively restated contracts that were modified prior to January 1, 2018. Therefore, the comparative information has not been adjusted and continues to be reported under Topic 605. See Note 2, Critical Accounting Policies and Estimates, for the Company's policy on Revenue Recognition and Note 16, Changes in Accounting Policies, for further discussion on the effect of the adoption of ASC Topic 606 on the Company's Consolidated Financial Statements.

In February 2016, the FASB issued ASU No. 2016-02, Leases (Topic 842). This update requires organizations to recognize lease assets and lease liabilities on the balance sheet and also disclose key information about leasing arrangements. This ASU is effective for annual reporting periods beginning on or after December 15, 2018, and interim periods within those annual periods. Earlier application is permitted for all entities as of the beginning of an interim or annual period.

In accordance with ASU 2016-02, we plan to elect not to recognize lease assets and lease liabilities for leases with a term of twelve months or less. The ASU requires a modified retrospective transition method, or a transition method option under ASU 2018-11, with the option to elect a package of practical expedients that permits the Company to: a. not reassess whether expired or existing contracts contain leases, b. not reassess lease classification for existing or expired leases and c. not consider whether previously capitalized initial direct costs would be appropriate under the new standard. The Company will elect to apply the package of practical expedients. 

The Company is assessing the impact of this pronouncement and revised guidance and anticipates it will impact the presentation of our lease assets and liabilities and associated disclosures related to the recognition of lease assets and liabilities that are not included in the Consolidated Balance Sheets under existing accounting guidance.  The adoption of pronouncement will have a significant impact on our consolidated balance sheet, but is not expected to have a significant impact on our consolidated statement of income or statement of cash flows.  We will adopt this new accounting standard on its effective date of January 1, 2019. We have not yet determined the dollar impact of recording leases on our consolidated balance sheet. 

In March 2017, FASB issued ASU No. 2017-07, Compensation - Retirement Benefits (Topic 715): Improving the Presentation of Net Periodic Pension Cost and Net Periodic Postretirement Benefit Cost ("ASU 2017-07"). The amendments in this update require that an employer disaggregate the service cost component from the other components of net periodic cost (benefit) and report that component in the same line item as other compensation costs arising from services rendered by employees during the period. The other components of net periodic cost (benefit) are required to be presented in the statement of operations separately from the

10

Table of Contents

service cost component and outside of operating earnings. The amendment also allows for the service cost component of net periodic cost (benefit) to be eligible for capitalization when applicable. The guidance was effective for the Company on January 1, 2018 and interim periods within that reporting period. The income statement presentation of the components of net periodic cost (benefit) was applied retrospectively, while limiting the capitalization of net periodic cost (benefit) in assets to the service cost component was applied prospectively. The Company adopted this standard update as required on January 1, 2018 and the impact of adoption resulted in a reclassification of all components of net periodic benefit from operating earnings to other income in the amount of $12,000 for the three months ended September 30, 2018 and 2017, respectively, and $36,000 for the nine months ended September 30, 2018 and 2017, respectively.

In August 2018, the SEC adopted the final rule under SEC Release No. 33-10532, Disclosure Update and Simplification, amending certain disclosure requirements that were redundant, duplicative, overlapping, outdated or superseded. In addition, the amendments expanded the disclosure requirements on the analysis of stockholders' equity for interim financial statements. Under the amendments, an analysis of changes in each caption of stockholders' equity presented in the balance sheet must be provided in a note or separate statement. The analysis should present a reconciliation of the beginning balance to the ending balance of each period for which a statement of comprehensive income is required to be filed. This final rule is effective on November 5, 2018. The Company is in the process of evaluating the impact of the final rule on its consolidated financial statements.

4. NET INCOME PER COMMON SHARE
Basic net income (loss) per common share is computed based on the weighted average number of common shares outstanding during the period. Diluted net income per common share is computed similarly but includes the effect of the assumed exercise of restricted stock under the treasury stock method.
The computation of basic and diluted net income per common share is as follows:

 
Three Months Ended
 
Nine Months Ended
 
September 30,
 
September 30,
 
2018
 
2017
 
2018
 
2017
Net income (loss)
$
(1,803,000
)
 
$
855,000

 
$
(839,000
)
 
$
4,704,000

 
 
 
 
 
 
 
 
Weighted average common shares outstanding — basic
7,804,000

 
7,711,000

 
7,758,000

 
7,683,000

Effect of dilutive securities

 
46,000

 

 
56,000

Weighted average common and potentially issuable common shares outstanding — diluted
7,804,000

 
7,757,000

 
7,758,000

 
7,739,000

 
 
 
 
 
 
 
 
Basic net income (loss) per common share
$
(0.23
)
 
$
0.11

 
$
(0.11
)
 
$
0.61

Diluted net income (loss) per common share
$
(0.23
)
 
$
0.11

 
$
(0.11
)
 
$
0.61



11

Table of Contents


5. MAJOR CUSTOMERS
Core Molding Technologies has four major customers, Navistar, Inc. (“Navistar”), Volvo Group North America, LLC (“Volvo”), PACCAR, Inc. (“PACCAR”) and Universal Forest Products, Inc. (“UFP”). Major customers are defined as customers whose sales individually consist of more than ten percent of total sales during any reporting period in the current year. The following table presents sales revenue for the above-mentioned customers for the three and nine months ended September 30, 2018 and 2017:

 
Three Months Ended
 
Nine Months Ended
 
September 30,
 
September 30,
 
2018
 
2017
 
2018
 
2017
Navistar product sales
$
14,123,000

 
$
11,319,000

 
$
37,939,000

 
$
30,495,000

Navistar tooling sales
1,031,000

 
12,000

 
1,043,000

 
90,000

Total Navistar sales
15,154,000

 
11,331,000

 
38,982,000

 
30,585,000

 
 
 
 
 
 
 
 
Volvo product sales
11,037,000

 
7,261,000

 
33,222,000

 
20,044,000

Volvo tooling sales
11,000

 
432,000

 
54,000

 
8,011,000

Total Volvo sales
11,048,000

 
7,693,000

 
33,276,000

 
28,055,000

 
 
 
 
 
 
 
 
PACCAR product sales
10,684,000

 
7,316,000

 
25,984,000

 
19,168,000

PACCAR tooling sales
321,000

 
50,000

 
6,384,000

 
2,932,000

Total PACCAR sales
11,005,000

 
7,366,000

 
32,368,000

 
22,100,000

 
 
 
 
 
 
 
 
UFP product sales
7,212,000

 

 
21,261,000

 

UFP tooling sales
240,000

 

 
240,000

 

Total UFP sales
7,452,000

 

 
21,501,000

 

 
 
 
 
 
 
 
 
Other product sales
19,249,000

 
11,697,000

 
68,837,000

 
41,016,000

Other tooling sales
768,000

 
407,000

 
1,360,000

 
852,000

Total other sales
20,017,000

 
12,104,000

 
70,197,000

 
41,868,000

 
 
 
 
 
 
 
 
Total product sales
62,305,000

 
37,593,000

 
187,243,000

 
110,723,000

Total tooling sales
2,371,000

 
901,000

 
9,081,000

 
11,885,000

Total sales
$
64,676,000

 
$
38,494,000

 
$
196,324,000

 
$
122,608,000


6. INVENTORY

Inventories, which include material, labor and manufacturing overhead, are valued at the lower of cost or market. The inventories are accounted for using the first-in, first-out (FIFO) method of determining inventory costs. Inventories consisted of the following:

 
September 30, 2018
 
December 31, 2017
Raw materials
$
15,048,000

 
$
8,450,000

Work in process
1,360,000

 
2,061,000

Finished goods
6,240,000

 
2,948,000

 
$
22,648,000

 
$
13,459,000


Inventory quantities on-hand are regularly reviewed, and where necessary, provisions for excess and obsolete inventory are recorded based on historical and anticipated usage.


12

Table of Contents

7. PROPERTY, PLANT & EQUIPMENT

Property, plant and equipment consisted of the following for the periods specified:
 
September 30, 2018
 
December 31, 2017
Property, plant and equipment
$
162,572,000

 
$
144,849,000

Accumulated depreciation
(81,750,000
)
 
(76,218,000
)
Property, plant and equipment — net
$
80,822,000

 
$
68,631,000


Property, plant, and equipment are recorded at cost, unless obtained through acquisition, then assets are recorded at estimated fair value at the date of acquisition. Preliminary estimated fair value amount of $12,994,000 is included in the above table associated with the January 16, 2018 acquisition of Horizon Plastics. These amounts are preliminary, pending finalization of working capital adjustments and the fair value valuation reports. Depreciation is provided on a straight-line method over the estimated useful lives of the assets. The carrying amount of long-lived assets is evaluated annually to determine if an adjustment to the depreciation period or to the unamortized balance is warranted. Amounts invested in capital additions in progress were $4,178,000 and $3,045,000 at September 30, 2018 and December 31, 2017, respectively. At September 30, 2018 and December 31, 2017, purchase commitments for capital expenditures in progress were $1,087,000 and $1,071,000, respectively.

8. HORIZON PLASTICS ACQUISITION

On January 16, 2018, the Company entered into an Asset Purchase Agreement (the "Agreement") with Horizon Plastics International Inc., 1541689 Ontario Inc., 2551024 Ontario Inc. and Horizon Plastics de Mexico, S.A. de C.V. (collectively "Horizon Plastics"). Pursuant to the terms of the Agreement the Company acquired substantially all of the assets and assumed certain specified liabilities of Horizon Plastics for a cash purchase of $62,457,000, subject to a working capital closing adjustment and other customary holdbacks, which are still pending.

The acquisition was funded through a combination of cash on hand and borrowings under the Amended and Restated Credit Agreement ("A/R Credit Agreement"), further described in Note 11, entered into with KeyBank National Association as administrative agent and various other financial institutions on January 16, 2018.

The purpose of the acquisition was to increase the Company's process capabilities to include structural foam and structural web molding, expand its geographical footprint, and diversify the Company's customer base.

Consideration was preliminarily allocated to assets acquired and liabilities assumed based on their fair values as of the acquisition date as follows:
Accounts Receivable
 
$
7,655,000

Inventory
 
6,567,000

Other Current Assets
 
642,000

Property and Equipment
 
12,994,000

Intangibles
 
17,520,000

Goodwill
 
20,554,000

Accounts Payable
 
(3,181,000
)
Other Current Liabilities
 
(294,000
)
 
 
$
62,457,000

The purchase price included consideration for strategic benefits, including an assembled workforce, operational infrastructure and synergistic revenue opportunities, which resulted in the recognition of goodwill. The goodwill is deductible for income tax purposes.

The Company incurred $1,289,000 of expense for the nine months ended September 30, 2018 associated with the acquisition, which is recorded in selling, general and administrative expense.


13

Table of Contents

The amount preliminarily allocated to intangible assets has been attributed to the following categories and will be amortized over the useful lives of each individual asset identified on a straight-line basis as follows:
Acquired Intangible Assets
Estimated Fair Value
Estimated Useful Life (Years)
Non-competition Agreement
$
1,910,000

5
Trademarks
1,610,000

25
Developed Technology
4,420,000

7
Customer Relationships
9,580,000

12
Total
$
17,520,000

 

The allocation of purchase price is preliminary and subject to completion upon obtaining the necessary remaining information, including (1) the identification and valuation of assets acquired and liabilities assumed, including intangible assets and related goodwill, and (2) the finalization of the opening balance sheet, including working capital settlements which are still pending. We have preliminarily valued the acquired assets and liabilities based on their estimated fair value. These estimates are subject to change as additional information becomes available. Any adjustments to the preliminary fair values will be made as such information becomes available and made within the customary measurement period. 

Pro Forma Information
The unaudited pro forma information for the combined results of the Company has been prepared as if the 2018 acquisitions had taken place on January 1, 2017. The unaudited pro forma information is not necessarily indicative of the results that we would have achieved had the transactions actually taken place on January 1, 2017 and the unaudited pro forma information does not purport to be indicative of future financial operating results.

 
Pro forma for the three months ended September 30,
 
Pro forma for the nine months ended September 30,
 
2018
 
2017
 
2018
 
2017
Net revenue
$
64,676,000

 
$
54,348,000

 
$
198,993,000

 
$
170,666,000

Net income (loss)
(1,693,000
)
 
1,570,000

 
142,000

 
7,750,000

Net income (loss) per common share:
 
 
 
 
 
 
 
Basic
$
(0.22
)
 
$
0.20

 
$
0.02

 
$
1.01

Diluted
$
(0.22
)
 
$
0.20

 
$
0.02

 
$
1.00



The unaudited pro forma net income includes the following adjustments that would have been recorded had the 2018 acquisition taken place on January 1, 2017.
 
Pro forma for the three months ended September 30,
 
Pro forma for the nine months ended September 30,
 
2018
 
2017
 
2018
 
2017
Depreciation expense
$

 
$
3,000

 
$
55,000

 
$
41,000

Amortization expense

 
469,000

 
78,000

 
1,407,000

Interest (income) expense
(141,000
)
 
364,000

 
(204,000
)
 
1,301,000

Non-recurring transaction costs

 

 
(1,289,000
)
 

Income tax expense (benefit)
31,000

 
(251,000
)
 
263,000

 
(819,000
)


14

Table of Contents

9. GOODWILL AND INTANGIBLES

Goodwill activity for the nine months ended September 30, 2018 consisted of the following:

Balance at December 31, 2017
 
$
2,403,000

Additions
 
20,554,000

Impairment
 

Balance at September 30, 2018
 
$
22,957,000


Intangible assets at September 30, 2018 were comprised of the following:

Definite-lived Intangible Assets
 
Amortization Period (Years)
 
Gross Carrying Amount
 
Accumulated Amortization
 
Net Carrying Amount
Trade Name
 
25
 
$
250,000

 
$
(35,000
)
 
$
215,000

Trademarks
 
25
 
1,610,000

 
(46,000
)
 
1,564,000

Non-competition Agreement
 
5
 
1,910,000

 
(270,000
)
 
1,640,000

Developed Technology
 
7
 
4,420,000

 
(447,000
)
 
3,973,000

Customer Relationships
 
10-12
 
9,980,000

 
(706,000
)
 
9,274,000

 
 
 
 
$
18,170,000

 
$
(1,504,000
)
 
$
16,666,000


The aggregate intangible asset amortization expense was $482,000 and $13,000 for the three months ended September 30, 2018 and 2017, respectively. The aggregate intangible asset amortization expense was $1,366,000 and $38,000 for the nine months ended September 30, 2018 and 2017, respectively. Amounts included above related to the January 16, 2018 acquisition of Horizon Plastics are preliminary and subject to change as the Company finalizes working capital settlements and valuation studies.

10. POST RETIREMENT BENEFITS
The components of expense for Core Molding Technologies’ post-retirement benefit plans for the three and nine months ended September 30, 2018 and 2017 are as follows:
 
Three Months Ended
 
Nine Months Ended
 
September 30,
 
September 30,
 
2018
 
2017
 
2018
 
2017
Pension expense:
 
 
 
 
 
 
 
Multi-employer plan
$
186,000

 
$
153,000

 
$
549,000

 
$
479,000

Defined contribution plan
182,000

 
162,000

 
698,000

 
557,000

Total pension expense
368,000

 
315,000

 
1,247,000

 
1,036,000

 
 
 
 
 
 
 
 
Health and life insurance:
 
 
 
 
 
 
 
Interest cost
69,000

 
75,000

 
207,000

 
224,000

Amortization of prior service costs
(124,000
)
 
(124,000
)
 
(372,000
)
 
(372,000
)
Amortization of net loss
43,000

 
37,000

 
129,000

 
112,000

Net periodic benefit cost
(12,000
)
 
(12,000
)
 
(36,000
)
 
(36,000
)
 
 
 
 
 
 
 
 
Total post retirement benefits expense
$
356,000

 
$
303,000

 
$
1,211,000

 
$
1,000,000


The Company made payments of $1,392,000 to pension plans and $238,000 for post-retirement healthcare and life insurance during the nine months ended September 30, 2018. For the remainder of 2018, the Company expects to make approximately $300,000 of pension plan payments, of which $92,000 was accrued at September 30, 2018. The Company also expects to make approximately $858,000 of post-retirement healthcare and life insurance payments for the remainder of 2018, all of which were accrued at September 30, 2018.


15

Table of Contents

11. DEBT
Debt consists of the following:
 
September 30,
2018
 
December 31,
2017
Term loan payable to Key Bank, interest at a variable rate (3.36% at December 31, 2017)
$

 
$
6,750,000

Term loans, interest at a variable rate (4.24% at September 30, 2018) with quarterly payments of interest and principal through January 2023
42,469,000

 

Revolving loans, interest at a variable rate (3.92% at September 30, 2018)

 

Total
42,469,000

 
6,750,000

Less deferred loan costs
(648,000
)
 

Less current portion
(3,230,000
)
 
(3,000,000
)
Long-term debt
$
38,591,000

 
$
3,750,000


Credit Agreement

On January 16, 2018, the Company entered into an A/R Credit Agreement with KeyBank National Association as administrative agent and various financial institutions party thereto as lenders (the "Lenders"). Pursuant to the terms of the A/R Credit Agreement (i) the Company may borrow revolving loans in the aggregate principal amount of up to $40,000,000 (the “US Revolving Loans”) from the Lenders and term loans in the aggregate principal amount of up to $32,000,000 from the Lenders, (ii) the Company's wholly-owned subsidiary, Horizon Plastics International, Inc., (the "Subsidiary") may borrow revolving loans in an aggregate principal amount of up to $10,000,000 from the Lenders (which revolving loans shall reduce the availability of the US Revolving Loans to the Company on a dollar-for-dollar basis) and term loans in an aggregate principal amount of up to $13,000,000 from the Lenders, (iii) the Company obtained a Letter of Credit Commitment of $250,000, of which $175,000 has been issued and (iv) the Company repaid the outstanding term loan balance of $6,750,000. The Credit Agreement is secured by a guarantee of each U.S. and Canadian subsidiary of the Company, and by a lien on substantially all of the present and future assets of the Company and its U.S. and Canadian subsidiaries, except that only 65% of the stock issued by Corecomposites de Mexico, S. de R.L. de C.V. has been pledged.

Concurrent with the closing of the A/R Credit Agreement the Company borrowed the $32,000,000 term loan and $2,000,000 from the US Revolving loan and the Subsidiary borrowed the $13,000,000 term loan and $2,500,000 from revolving loans to provide $49,500,000 of funding for the acquisition of Horizon Plastics. The basis point margin can range from 175 to 225 basis points based on the Company's leverage ratio and was set at 200 basis points as of September 30, 2018.

The Company has available $40,000,000 of variable rate revolving loans of which none is outstanding as of September 30, 2018. These revolving loans are scheduled to mature on January 1, 2022, but are classified, when outstanding, as current on the balance sheet as the Company expects to pay the outstanding balance off within the next twelve months.

Bank Covenants

The Company is required to meet certain financial covenants included in the Credit Agreement with respect to leverage ratios and fixed charge ratios, as well as other customary affirmative and negative covenants. As of September 30, 2018, the Company was in compliance with its financial covenants associated with the loans made under the Credit Agreement as described above.

Interest Rate Swaps

The Company entered into two interest rate swap agreements that became effective January 18, 2018 and continue through January 2023, one of which was designated as a cash flow hedge for $25,000,000 of the $32,000,000 term loan to the Company mentioned above and the other designated as a cash flow hedge for $10,000,000 of the $13,000,000 term loan to the Subsidiary mentioned above. Under these agreements, the Company will pay a fixed rate of approximately 2.49% to the counterparty and receives one month LIBOR resulting in a total initial fixed rate of approximately 4.49% for both cash flow hedges. The fair value of the interest rate swap was an asset of $424,000 at September 30, 2018. While the Company is exposed to credit loss on its interest rate swaps in the event of non-performance by the counter party to the swap, management believes that such non-performance is unlikely to occur given the financial resources of the counter party.


16

Table of Contents

12. INCOME TAXES

The Tax Cuts and Jobs Act (“the “Act”) was enacted on December 22, 2017. The Act reduces the U.S. federal corporate income tax rate from 35% to 21%, requires companies to pay a one-time transition tax on earnings of certain foreign subsidiaries that were previously tax deferred, creates new taxes on certain foreign sourced earnings, provides for acceleration of business asset expensing, and reduces the amount of executive pay that may qualify as a tax deduction, among other changes. FASB ASC 740 requires the recognition of the effects of tax law changes in the period of enactment. However, due to the complexities of the new tax legislation, the SEC has issued SAB 118 which allows for the recognition of provisional amounts during a measurement period.

The Act's one-time transition tax calculation is complex, and as such we made a reasonable estimate of the effects of the one-time transition tax, and recognized a provisional amount in the fourth quarter of 2017. We have since finalized our analysis and subsequently filed our 2017 U.S. income tax return. The actual impact of the one-time transition tax was materially consistent with the provisional amount booked at December 31, 2017.
The Company’s consolidated balance sheets include a net non-current deferred tax liability of $395,000 at September 30, 2018 and December 31, 2017. The Company evaluates the balance of deferred tax assets that will be realized based on the premise that the Company is more likely than not to realize deferred tax benefits through the generation of future taxable income. As of September 30, 2018 and December 31, 2017, the Company had no liability for unrecognized tax benefits. The Company does not anticipate that unrecognized tax benefits will significantly change within the next twelve months.
Income tax expense for the nine months ended September 30, 2018 is estimated to be $228,000, on a loss of $611,000 before income taxes. Net income tax expense for the nine months ended September 30, 2018 is a result of taxable income of $4,205,000 in the Company's Canadian and Mexican operations, which has a combined effective tax rate of approximately 29%, combined with operating loss of $4,815,000 in the Company's United States facilities, which has an effective tax rate of 21%. Income tax expense for the nine months ended September 30, 2017 was estimated to be $2,262,000, or approximately 32% of income before income taxes.
The Company files income tax returns in the U.S., Mexico, Canada and various state jurisdictions. The Company is no longer subject to U.S. federal and state income tax examinations by tax authorities for years prior to 2015, and is no longer subject to Mexican income tax examinations by Mexican authorities for years prior to 2012. As a result of the Horizon Plastics acquisition on January 16, 2018, the Company now has filing requirements in Canada.

13. SHARE BASED COMPENSATION
The Company has a Long Term Equity Incentive Plan (the “2006 Plan”), as approved by the Company’s stockholders in May 2006 and as amended in May 2015. The 2006 Plan allows for grants to directors and employees of non-qualified stock options, incentive stock options, stock appreciation rights, restricted stock, performance shares, performance units and other incentive awards (“Stock Awards”) up to an aggregate of 3,000,000 awards, each representing a right to buy a share of Core Molding Technologies common stock. Stock Awards can be granted under the 2006 Plan through the earlier of December 31, 2025, or the date the maximum number of available awards under the 2006 Plan have been granted.
Restricted Awards
The Company grants shares of its common stock to certain directors, officers, key managers and employees in the form of unvested stock and units (“Restricted Awards”). These awards are recorded at the market value of Core Molding Technologies’ common stock on the date of issuance, net of estimated forfeitures, and amortized ratably as compensation expense over the applicable vesting period, which is typically three years. The Company has applied forfeiture rates, estimated based on historical experience, of 3.5%-6.5% to the restricted stock fair values. These estimated forfeiture rates are applied to grants based on their remaining vesting term and may be revised in subsequent periods if actual forfeitures differ from these estimates.






17

Table of Contents

The following summarizes the status of Restricted Stock and changes during the nine months ended September 30, 2018:

 
Number of
Shares
 
Weighted Average
Grant Date
Fair Value
Unvested balance at December 31, 2017
141,095

 
$
16.79

Granted
172,578

 
14.83

Vested
(77,318
)
 
16.31

Forfeited
(15,625
)
 
17.54

Unvested balance at September 30, 2018
220,730

 
$
15.37

At September 30, 2018 and 2017, there was $2,589,000 and $1,871,000, respectively, of total unrecognized compensation expense, net of estimated forfeitures, related to Restricted Awards granted under the 2006 Plan. That cost is expected to be recognized over the weighted-average period of 1.6 years. Total compensation cost, net of estimated forfeitures, related to restricted award grants for the three months ended September 30, 2018 and 2017 was $259,000 and $270,000, respectively, all of which was recorded to selling, general and administrative expense. Compensation cost related to restricted stock grants for the nine months ended September 30, 2018 and 2017 was $1,229,000 and $1,061,000, respectively, all of which was recorded to selling, general and administrative expense.

Compensation expense for restricted award is recorded at the fair value at the time of the grant, net of estimated forfeitures, over the vesting period of the restricted award grant. The Company does not receive a tax deduction for restricted award until the restricted award vests. The tax deduction for restricted award is based on the fair market value as of the vesting date. Additional tax expense due for the fair market value on the grant date in excess of the value at time of vesting was $20,000 for the nine months ended September 30, 2018. Tax benefits received for vested restricted award in excess of the fair market value as of the grant date were $136,000 for the nine months ended September 30, 2017.
During the nine months ended September 30, 2018 and 2017, employees surrendered 17,180 and 19,533 shares, respectively, of the Company's common stock to satisfy income tax withholding obligations in connection with the vesting of restricted awards.
14. FAIR VALUE OF FINANCIAL INSTRUMENTS

Fair value is defined as the price that would be received to sell an asset or paid to transfer a liability in a transaction between market participants as of the measurement date. Fair value is measured using the fair value hierarchy and related valuation methodologies as defined in the authoritative literature. This guidance provides a fair value framework that requires the categorization of assets and liabilities into three levels based upon the assumptions (inputs) used to price the assets or liabilities. Level 1 provides the most reliable measure of fair value, whereas Level 3 generally requires significant management judgment.

The three levels are defined as follows:

Level 1 -
Quoted prices in active markets for identical assets and liabilities.
Level 2 -
Quoted prices for similar instruments in active markets, quoted prices for identical or similar instruments in markets that are not active and model-derived valuations, in which all significant inputs are observable in active markets.
Level 3 -
Significant unobservable inputs reflecting management's own assumptions about the inputs used in pricing the asset or liability.

The Company’s financial instruments consist of cash and cash equivalents, accounts receivable, accounts payable, debt, interest rate swaps and foreign currency derivatives. Cash and cash equivalents, accounts receivable and accounts payable carrying values as of September 30, 2018 and December 31, 2017 approximate fair value due to the short-term maturities of these financial instruments. The carrying amounts of long-term debt and the revolving line of credit approximate fair value as of September 30, 2018 and December 31, 2017 due to the short term nature of the underlying variable rate LIBOR agreements. The Company had Level 2 fair value measurements at September 30, 2018 and December 31, 2017 relating to the Company’s interest rate swaps and foreign currency derivatives.




18

Table of Contents

Derivative and hedging activities
Foreign currency derivatives
The Company conducted business in foreign countries and paid certain expenses in foreign currencies; therefore, the Company was exposed to foreign currency exchange risk between the U.S. Dollar and foreign currencies, which could impact the Company’s operating income and cash flows. To mitigate risk associated with foreign currency exchange, the Company entered into forward contracts to exchange a fixed amount of U.S. Dollars for a fixed amount of foreign currency, which will be used to fund future foreign currency cash flows. At inception, all forward contracts are formally documented as cash flow hedges and are measured at fair value each reporting period.
Derivatives are formally assessed both at inception and at least quarterly thereafter, to ensure that derivatives used in hedging transactions are highly effective in offsetting changes in cash flows of the hedged item. If it is determined that a derivative ceases to be a highly effective hedge, or if the anticipated transaction is no longer probable of occurring, hedge accounting is discontinued, and any future mark-to-market adjustments are recognized in earnings. The effective portion of gain or loss is reported in other comprehensive income and the ineffective portion is reported in earnings. The impacts of these contracts were largely offset by gains and losses resulting from the impact of changes in exchange rates on transactions denominated in the foreign currency. As of September 30, 2018, the Company had no ineffective portion related to the cash flow hedges.
Interest Rate Swaps
The Company entered into interest rate swap contracts to fix the interest rate on an initial aggregate amount of $35,000,000 thereby reducing exposure to interest rate changes. The interest rate swap has an initial fixed rate of 4.49% and an effective date of January 18, 2018. At inception, all interest rate swaps were formally documented as cash flow hedges and are measured at fair value each reporting period. See Note 11, "Debt", for additional information.
Financial statements impacts
The following tables detail amounts related to our derivatives designated as hedging instruments:
 
Fair Value of Derivative Instruments
 
September 30, 2018
 
Asset Derivatives
 
Liability Derivatives
 
Balance Sheet Location
 
Fair Value
 
Balance Sheet Location
 
Fair Value
Foreign exchange contracts
Prepaid expense other current assets
 
$
284,000

 
Accrued liabilities other
 
$
21,000

Notional contract values
 
 
$
12,207,000

 
 
 
$
9,318,000

Interest rate swaps
Other non-current assets
 
$
424,000

 
Other non-current liabilities
 
$

Notional swap values
 
 
$
33,032,000

 
 
 
$

 
December 31, 2017
 
Asset Derivatives
 
Liability Derivatives
 
Balance Sheet Location
 
Fair Value
 
Balance Sheet Location
 
Fair Value
Foreign exchange contracts
Prepaid expense other current assets
 
$

 
Accrued liabilities other
 
$
298,000

Notional contract values
 
 
$

 
 
 
$
8,766,000

Interest rate swaps
Other non-current assets
 
$

 
Other non-current liabilities
 
$

Notional swap values
 
 
$

 
 
 
$








19

Table of Contents

The following tables summarize the amount of unrealized / realized gain and loss recognized in Accumulated Other Comprehensive Income (AOCI) for the three months ended September 30, 2018 and 2017:
Derivatives in subtopic 815-20 Cash Flow Hedging Relationship

Amount of Unrealized Gain or (Loss) Recognized in Accumulated Other Comprehensive Income on Derivative
 
Location of Gain or (Loss) Reclassified from Accumulated Other Comprehensive Income(A)
 
Amount of Realized Gain or (Loss) Reclassified from Accumulated Other Comprehensive Income


2018
2017

 
2018
2017
Foreign exchange contracts
 
$
887,000

$
113,000

 
Cost of goods sold
 
$
(11,000
)
$
220,000

 
 
Selling, general and administrative expense
 
$
(9,000
)
$
32,000

Interest rate swaps
 
$
114,000

$

 
Interest Expense
 
$
(61,000
)
$


The following tables summarize the amount of unrealized / realized gain and loss recognized in Accumulated Other Comprehensive Income (AOCI) for the nine months ended September 30, 2018 and 2017:
Derivatives in subtopic 815-20 Cash Flow Hedging Relationship
 
Amount of Unrealized Gain or (Loss) Recognized in Accumulated Other Comprehensive Income on Derivative
 
Location of Gain or (Loss) Reclassified from Accumulated Other Comprehensive Income(A)
 
Amount of Realized Gain or (Loss) Reclassified from Accumulated Other Comprehensive Income
 
 
2018
2017
 
 
2018
2017
Foreign exchange contracts
 
$
766,000

$
1,054,000

 
Cost of goods sold
 
$
184,000

$
346,000

 
 
Selling, general and administrative expense
 
$
21,000

$
51,000

Interest rate swaps
 
$
254,000

$

 
Interest Expense
 
$
(169,000
)
$



(A) The foreign currency derivative activity reclassified from Accumulated Other Comprehensive Income is allocated to cost of goods sold and selling, general and administrative expense based on the percentage of foreign currency spend.

See Note 8 for non-recurring fair value measurements for the nine months ended September 30, 2018.

20

Table of Contents


15. ACCUMULATED OTHER COMPREHENSIVE INCOME
The following table presents changes in Accumulated Other Comprehensive Income, net of tax, for the nine months ended September 30, 2018 and 2017:
2017:
Hedging Derivative Activities(A)
Post Retirement Benefit Plan Items(B)
Accumulated Other Comprehensive Income
Balance at December 31, 2016
$
(200,000
)
$
2,614,000

$
2,414,000

Other Comprehensive Income before reclassifications
1,054,000


1,054,000

Amounts reclassified from accumulated other comprehensive income
(397,000
)
(260,000
)
(657,000
)
Income tax benefit
(223,000
)
78,000

(145,000
)
Balance at September 30, 2017
$
234,000

$
2,432,000

$
2,666,000

 
 
 
 
2018:
 
 
 
Balance at December 31, 2017
$
(197,000
)
$
2,267,000

$
2,070,000

Other Comprehensive Income before reclassifications
1,020,000


1,020,000

Amounts reclassified from accumulated other comprehensive income
(36,000
)
(243,000
)
(279,000
)
Income tax benefit (expense)
(253,000
)
51,000

(202,000
)
Balance at September 30, 2018
$
534,000

$
2,075,000

$
2,609,000


(A) The foreign currency derivative activity reclassified from Accumulated Other Comprehensive Income is allocated to cost of goods sold and sales, general and administrative expense based on the percentage of foreign currency spend. The tax effect of the foreign currency derivative activity reclassified from Accumulated Other Comprehensive Income is included in income tax expense on the Consolidated Statements of Income. The interest rate swap activity reclassified from Accumulated Other Comprehensive Income is recorded in Interest Expense. The tax effect of the interest rate swap activity reclassified from Accumulated Other Comprehensive Income is included in income tax expense on the Consolidated Statements of Income.

(B) The effect of post-retirement benefit items reclassified from Accumulated Other Comprehensive Income is included in other income and expense on the Consolidated Statements of Income. These Accumulated Other Comprehensive Income components are included in the computation of net periodic benefit cost (see Note 10 "Post Retirement Benefits" for additional details). The tax effect of post-retirement benefit items reclassified from Accumulated Other Comprehensive Income is included in income tax expense on the Consolidated Statements of Income.

21

Table of Contents

16. CHANGES IN ACCOUNTING POLICIES

The Company adopted ASC Topic 606 on January 1, 2018 through a cumulative adjustment to equity and contract assets of $1,069,000. Under ASC Topic 606, revenue of certain tooling programs that include an enforceable right to payment are now recognized over time based on the extent of progress towards completion of its performance obligation. Prior to the adoption of ASC Topic 606, the Company recognized revenue for these contracts on a completed contract basis.

The following tables summarize the effects of adopting Topic 606 on our unaudited consolidated financial statements for the three and nine months ended September 30, 2018.

Consolidated Statements of Income (Unaudited)
 
Three Months Ended
 
September 30, 2018
 
As Reported
 
Adjustments
 
Without adoption of Topic 606
Net sales:
 
 
 
 
 
Products
$
62,305,000

 
$

 
$
62,305,000

Tooling
2,371,000

 
1,488,000

 
3,859,000

Total net sales
64,676,000

 
1,488,000

 
66,164,000

 
 
 
 
 
 
Total cost of sales
59,814,000

 
1,245,000

 
61,059,000

 
 
 
 
 
 
Gross margin
4,862,000

 
243,000

 
5,105,000

 
 
 
 
 
 
Total selling, general and administrative expense
6,349,000

 

 
6,349,000

 
 
 
 
 
 
Operating Income (Loss)
(1,487,000
)
 
243,000

 
(1,244,000
)
 
 
 
 
 
 
Other income and expense
 
 
 
 
 
Interest expense
632,000

 

 
632,000

Net periodic post-retirement benefit cost
(12,000
)
 

 
(12,000
)
Total other income and expense
620,000

 

 
620,000

 
 
 
 
 
 
Income (loss) before taxes
(2,107,000
)
 
243,000

 
(1,864,000
)
 
 
 
 
 
 
Income tax expense (benefit)
(304,000
)
 
51,000

 
(253,000
)
 
 
 
 
 
 
Net income (loss)
$
(1,803,000
)
 
$
192,000

 
$
(1,611,000
)
 
 
 
 
 
 
Net income (loss) per common share:
 
 
 
 
 
Basic
$
(0.23
)
 
$

 
$
(0.21
)
Diluted
$
(0.23
)
 
$

 
$
(0.21
)










22

Table of Contents


Consolidated Statements of Income (Unaudited)

 
Nine Months Ended
 
September 30, 2018
 
As Reported
 
Adjustments
 
Without adoption of Topic 606
Net sales:
 
 
 
 
 
Products
$
187,243,000

 
$

 
$
187,243,000

Tooling
9,081,000

 
3,850,000

 
12,931,000

Total net sales
196,324,000

 
3,850,000

 
200,174,000

 
 
 
 
 
 
Total cost of sales
175,679,000

 
3,006,000

 
178,685,000

 
 
 
 
 
 
Gross margin
20,645,000

 
844,000

 
21,489,000

 
 
 
 
 
 
Total selling, general and administrative expense
19,587,000

 

 
19,587,000

 
 
 
 
 
 
Operating Income
1,058,000

 
844,000

 
1,902,000

 
 
 
 
 
 
Other income and expense
 
 
 
 
 
Interest expense
1,705,000

 

 
1,705,000

Net periodic post-retirement benefit cost
(36,000
)
 

 
(36,000
)
Total other income and expense
1,669,000

 

 
1,669,000

 
 
 
 
 
 
Income (loss) before taxes
(611,000
)
 
844,000

 
233,000

 
 
 
 
 
 
Income tax expense
228,000

 
177,000

 
405,000

 
 
 
 
 
 
Net income (loss)
$
(839,000
)
 
$
667,000

 
$
(172,000
)
 
 
 
 
 
 
Net income (loss) per common share:
 
 
 
 
 
Basic
$
(0.11
)
 
$

 
$
(0.02
)
Diluted
$
(0.11
)
 
$

 
$
(0.02
)




23

Table of Contents

Consolidated Balance Sheets (Unaudited)

 
September 30, 2018
 
As Reported
 
Adjustments
 
Without adoption of Topic 606
Assets:
 
 
 
 
 
Current assets:
 
 
 
 
 
Cash and cash equivalents
$

 
$

 
$

Accounts receivable, net
38,666,000

 

 
38,666,000

Inventory, net
22,648,000

 

 
22,648,000

Prepaid expenses and other current assets
8,123,000

 
(402,000
)
 
7,721,000

Total current assets
69,437,000

 
(402,000
)
 
69,035,000

 
 
 
 
 
 
Property, plant and equipment, net
80,822,000

 

 
80,822,000

Goodwill
22,957,000

 

 
22,957,000

Intangibles, net
16,666,000

 

 
16,666,000

Other non-current assets
2,184,000

 

 
2,184,000

Total Assets
$
192,066,000

 
$
(402,000
)
 
$
191,664,000

 
 
 
 
 
 
Liabilities and Stockholders’ Equity:
 
 
 
 
 
Current liabilities:
 
 
 
 
 
Revolving line of credit
$

 
$

 
$

Current portion of long-term debt
3,230,000

 

 
3,230,000

Accounts payable
29,066,000

 

 
29,066,000

Compensation and related benefits
5,071,000

 

 
5,071,000

Accrued other liabilities
4,940,000

 

 
4,940,000

Total current liabilities
42,307,000

 

 
42,307,000

 
 
 
 
 
 
Long-term debt
38,591,000

 

 
38,591,000

Deferred tax liability
395,000

 

 
395,000

Post retirement benefits liability
7,924,000

 

 
7,924,000

Total Liabilities
$
89,217,000

 
$

 
$
89,217,000

Commitments and Contingencies

 
 
 

Stockholders’ Equity:
 
 
 
 
 
Preferred stock — $0.01 par value, authorized shares — 10,000,000; no shares outstanding at September 30, 2018 and December 31, 2017

 

 

Common stock — $0.01 par value, authorized shares – 20,000,000; outstanding shares: 7,771,415 at September 30, 2018 and 7,711,277 December 31, 2017
78,000

 

 
78,000

Paid-in capital
32,693,000

 

 
32,693,000

Accumulated other comprehensive income, net of income taxes
2,609,000

 

 
2,609,000

Treasury stock - at cost, 3,790,308 at September 30, 2018 and 3,773,128 at December 31, 2017
(28,403,000
)
 

 
(28,403,000
)
Retained earnings
95,872,000

 
(402,000
)
 
95,470,000

Total Stockholders’ Equity
102,849,000

 
(402,000
)
 
102,447,000

Total Liabilities and Stockholders’ Equity
$
192,066,000

 
$
(402,000
)
 
$
191,664,000



24

Table of Contents

Consolidated Statements of Cash Flows (Unaudited)

 
Nine Months Ended
 
September 30, 2018
 
As Reported
 
Adjustments
 
Without adoption of Topic 606
Cash flows from operating activities:
 
 
 
 
 
Net income (loss)
$
(839,000
)
 
$
667,000

 
$
(172,000
)
 
 
 
 
 
 
Adjustments to reconcile net income to net cash provided by operating activities:
 
 
 
 
 
Depreciation and amortization
7,105,000

 

 
7,105,000

Loss on disposal of assets
6,000

 

 
6,000

Share-based compensation
1,228,000

 

 
1,228,000

Loss on foreign currency translation
14,000

 

 
14,000

Change in operating assets and liabilities:

 
 
 
 
Accounts receivable
(12,528,000
)
 

 
(12,528,000
)
Inventories
(2,265,000
)
 

 
(2,265,000
)
Prepaid and other assets
3,060,000

 
(667,000
)
 
2,393,000

Accounts payable
13,272,000

 

 
13,272,000

Accrued and other liabilities
(2,255,000
)
 

 
(2,255,000
)
Post retirement benefits liability
(274,000
)
 

 
(274,000
)
Net cash used in operating activities
6,524,000

 

 
6,524,000

 
 
 
 
 
 
Cash flows from investing activities:
 
 
 
 
 
Purchase of property, plant and equipment
(4,761,000
)
 

 
(4,761,000
)
Purchase of assets of Horizon Plastics
(62,457,000
)
 

 
(62,457,000
)
Net cash used in investing activities
(67,218,000
)
 

 
(67,218,000
)
 
 
 
 
 
 
Cash flows from financing activities:
 
 
 
 
 
Gross repayments on revolving line of credit
(67,594,000
)
 

 
(67,594,000
)
Gross borrowings on revolving line of credit
67,594,000

 

 
67,594,000

Proceeds from Horizon Plastics term loan
45,000,000

 

 
45,000,000

Payment of principal on term loans
(9,281,000
)
 

 
(9,281,000
)
Payment of deferred loan costs
(763,000
)
 

 
(763,000
)
Cash dividends paid
(792,000
)
 

 
(792,000
)
Payments related to the purchase of treasury stock
(250,000
)
 

 
(250,000
)
Net cash provided by financing activities
33,914,000

 

 
33,914,000

 
 
 
 
 
 
Net change in cash and cash equivalents
(26,780,000
)
 

 
(26,780,000
)
 
 
 
 
 
 
Cash and cash equivalents at beginning of period
26,780,000

 

 
26,780,000

 
 
 
 
 
 
Cash and cash equivalents at end of period
$

 
$

 
$

 
 
 
 
 
 
Cash paid for:
 
 
 
 
 
Interest (net of amounts capitalized)
$
1,612,000

 
$

 
$
1,612,000

Income taxes
$
848,000

 
$

 
$
848,000

Non Cash:
 
 
 
 
 
Fixed asset purchases in accounts payable
$
344,000

 
$

 
$
344,000



25

Table of Contents

17. SUBSEQUENT EVENT

On October 4, 2018, the Company announced that Kevin L. Barnett, its then President and CEO, would retire from the Company effective October 22, 2018 and had also resigned from its Board of Directors. In connection with his retirement and resignation, the Company and Mr. Barnett entered into a separation and release agreement. The separation and release agreement provides for future compensation and healthcare and a modification to unvested restricted stock awards. The components of the separation agreement will result in a one-time charge of approximately $858,000 during the fourth quarter of 2018.


26

Table of Contents

Part I — Financial Information

Item 2.
Management’s Discussion and Analysis of Financial Condition and Results of Operations

This Management's Discussion and Analysis of Financial Condition and Results of Operations contains forward-looking statements within the meaning of the federal securities laws. As a general matter, forward-looking statements are those focused upon future plans, objectives or performance as opposed to historical items and include statements of anticipated events or trends and expectations and beliefs relating to matters not historical in nature. Such forward-looking statements involve known and unknown risks and are subject to uncertainties and factors relating to Core Molding Technologies' operations and business environment, all of which are difficult to predict and many of which are beyond Core Molding Technologies' control.  Words such as “may,” “will,” “could,” “would,” “should,” “anticipate,” “predict,” “potential,” “continue,” “expect,” “intend,” “plans,” “projects,” “believes,” “estimates,” “encouraged,” “confident” and similar expressions are used to identify these forward-looking statements. These uncertainties and factors could cause Core Molding Technologies' actual results to differ materially from those matters expressed in or implied by such forward-looking statements.

Core Molding Technologies believes that the following factors, among others, could affect its future performance and cause actual results to differ materially from those expressed or implied by forward-looking statements made in this report: business conditions in the plastics, transportation, marine and commercial product industries (including changes in demand for truck production); federal and state regulations (including engine emission regulations); general economic, social, regulatory (including foreign trade policy) and political environments in the countries in which Core Molding Technologies operates; safety and security conditions in Mexico and Canada; dependence upon certain major customers as the primary source of Core Molding Technologies’ sales revenues; efforts of Core Molding Technologies to expand its customer base; the ability to develop new and innovative products and to diversify markets, materials and processes and increase operational enhancements; the actions of competitors, customers, and suppliers; failure of Core Molding Technologies’ suppliers to perform their obligations; the availability of raw materials; inflationary pressures; new technologies; regulatory matters; labor relations; labor availability; the loss or inability of Core Molding Technologies to attract and retain key personnel; the Company's ability to successfully identify, evaluate and manage potential acquisitions and to benefit from and properly integrate any completed acquisitions, including the recent acquisition of Horizon Plastics; the risk that the integration of Horizon Plastics may be more difficult, time-consuming or costly than expected; expected revenue synergies and cost savings from acquisition of Horizon Plastics may not be fully realized within the expected timeframe; revenues following the acquisition of Horizon Plastics may be lower than expected; customer and employee relationships and business operations may be disrupted by the acquisition of Horizon Plastics; federal, state and local environmental laws and regulations; the availability of capital; the ability of Core Molding Technologies to provide on-time delivery to customers, which may require additional shipping expenses to ensure on-time delivery or otherwise result in late fees and other customer charges; risk of cancellation or rescheduling of orders; management’s decision to pursue new products or businesses which involve additional costs, risks or capital expenditures; inadequate insurance coverage to protect against potential hazards; equipment and machinery failure; product liability and warranty claims; and other risks identified from time to time in Core Molding Technologies’ other public documents on file with the Securities and Exchange Commission, including those described in Item 1A of the 2017 Annual Report on Form 10-K.


27

Table of Contents

Description of the Company

Core Molding Technologies, Inc. is a manufacturer of sheet molding compound (SMC) and molder of thermoset and thermoplastic products. The Company produces high quality molded products, assemblies and SMC materials for varied markets, including medium and heavy-duty trucks, automotive, marine, home improvement, water management, agriculture, construction and other commercial markets. The Company offers customers a wide range of manufacturing processes to fit various program volume and investment requirements. These processes include compression molding of SMC, bulk molding compounds (BMC), resin transfer molding (RTM), liquid molding of dicyclopentadiene (DCPD), spray-up and hand-lay-up, glass mat thermoplastics (GMT), direct long-fiber thermoplastics (D-LFT) and structural foam and web injection molding. Core Molding Technologies has its headquarters in Columbus, Ohio, and operates production facilities in Columbus and Batavia, Ohio; Gaffney, South Carolina; Winona, Minnesota; Matamoros and Escobedo, Mexico; and Cobourg, Ontario, Canada. The demand for Core Molding Technologies’ products is primarily affected by economic conditions in the United States, Canada, and Mexico. Core Molding Technologies’ manufacturing operations have a significant fixed cost component. Accordingly, during periods of changing demand, the profitability of Core Molding Technologies’ operations may change proportionately more than revenues from operations.

In 1996, Core Molding Technologies acquired substantially all of the assets and assumed certain liabilities of Columbus Plastics, a wholly-owned operating unit of Navistar’s truck manufacturing division since its formation in late 1980. Columbus Plastics, located in Columbus, Ohio, was a compounder and compression molder of SMC. In 1998, Core Molding Technologies began operations at its second facility in Gaffney, South Carolina, and in 2001, the Company established a manufacturing presence in Mexico by acquiring certain assets of Airshield Corporation. As a result of this acquisition, Core Molding Technologies expanded its fiberglass molding capabilities to include the spray up, hand-lay-up open mold processes and RTM closed molding. In 2004, the Company acquired substantially all the operating assets of Keystone Restyling Products, Inc., a privately-held manufacturer and distributor of fiberglass reinforced products for the automotive-aftermarket industry. In 2005, Core Molding Technologies acquired certain assets of the Cincinnati Fiberglass Division of Diversified Glass, Inc., a Batavia, Ohio-based, privately held manufacturer and distributor of fiberglass reinforced plastic components supplied primarily to the heavy-duty truck market. In 2009, the Company completed construction of a production facility in Matamoros, Mexico that replaced its leased facility. The Company also acquired in 2015 substantially all of the assets of CPI Binani, Inc. ("CPI"), a wholly-owned subsidiary of Binani Industries Limited, located in Winona, Minnesota, which expanded the Company's process capabilities to include D-LFT and diversified its customer base. Most recently in 2018, the Company acquired substantially all of the assets and assumed certain specified liabilities of Horizon Plastics, which added manufacturing facilities in Cobourg, Canada and Escobedo, Mexico. The purpose of the acquisition was to increase the Company's process capabilities to include structural foam and structural web molding, expand its geographical footprint, and diversify the Company's customer base.

Business Overview

General
The Company’s business and operating results are directly affected by changes in overall customer demand, operational costs and performance and leverage of our fixed cost and selling, general and administrative ("SG&A") infrastructure. 

Product sales fluctuate in response to several factors including many that are beyond the Company’s control, such as general economic conditions, interest rates, government regulations, consumer spending, labor availability, and our customers’ production rates and inventory levels. Product sales consist of demand from customers in many different markets with different levels of cyclicality and seasonality. The North American truck market, which is highly cyclical, accounted for 55% and 68% of the Company’s product revenue for the nine months ended September 30, 2018 and 2017, respectively. 

Operating performance is dependent on the Company’s ability to manage changes in input costs for items such as raw materials, labor, and overhead operating costs. Performance is also affected by manufacturing efficiencies, including items such as on time delivery, quality, scrap, and productivity. Market factors of supply and demand can impact operating costs. In periods of rapid increases or decreases in customer demand, the Company is required to ramp operations activity up or down quickly which may impact manufacturing efficiencies more than in periods of steady demand. 

Operating performance is also dependent on the Company’s ability to effectively launch new customer programs, which are typically extremely complex in nature. The start of production of a new program is the result of a process of developing new molds and assembly equipment, validation testing, manufacturing process design, development and testing, along with training and often hiring employees. Meeting the targeted levels of manufacturing efficiency for new programs usually occurs over time as the Company gains experience with new tools and processes. Therefore, during a new program launch period, start-up costs and inefficiencies can affect operating results. 



28

Table of Contents

Nine Months of 2018 Overview
Product sales for the nine months ended September 30, 2018 increased 69% compared to the same period in 2017, and operating income declined 85%. New sales from the acquisition of Horizon Plastics and higher demand from our truck customers were the primary drivers of the sales increase, while the decrease in operating income was largely due to increased manufacturing inefficiencies at several of the Company's facilities and higher operating and SG&A costs.

For the nine months ended September 30, 2018, product sales to truck customers increased by 39% compared to the same period in 2017, as the increased production in the truck market continued. According to ACT Research, North American heavy-duty truck production increased approximately 26% for the nine months ended September 30, 2018 compared to the same period in 2017.

The Company continues to experience manufacturing inefficiencies as a result of the significant production demand in the heavy-duty truck market and the launch of several new programs. Given the current high demand levels, the Company has experienced extreme difficulty hiring, training and retaining labor in a tightening labor market at several manufacturing facilities. This, coupled with asset capacity and reliability constraints, has resulted in increased manufacturing inefficiencies and the inability to consistently meet customers' delivery and quality requirements, including for several of the Company's major customers. 

The Company's operating income in 2018 has been negatively affected by ongoing manufacturing inefficiencies and increased manufacturing costs as compared to the same period in 2017. Additional expenses realized as a result of these inefficiencies and higher operating costs include increased hiring, training, wages, overtime, non-local third party contract labor, including travel and local lodging, scrap, rework, expedited premium shipping, customer charges, returns, repairs and maintenance, and raw material costs.

For the nine months ended September 30, 2018, the Company recorded a net loss of $839,000, or $(0.11) per basic and diluted share, compared with net income of $4,704,000, or $0.61 per basic and diluted share for the nine months ended September 30, 2017. One-time acquisition transaction costs related to the Horizon Plastics acquisition negatively impacted net income by $941,000 ($1,289,000 pre-tax), or $0.12 per share for the first nine months of 2018. Excluding the one-time costs, the Company’s net income for the first nine months of 2018 would have been $102,000, or $0.01 per share. The Horizon Plastics acquisition, excluding one-time transaction costs, contributed earnings of $0.29 per basic and diluted share for the first nine months of 2018 and is performing as projected.

Looking forward, the Company anticipates continued higher product sales for the remainder of 2018 compared to 2017, due to additional sales from the acquisition of Horizon Plastics and higher demand from truck customers. ACT Research is forecasting 2018 heavy-duty truck production of 317,000 units which is an increase of approximately 24% compared to 2017. While we are working aggressively to improve our operating performance and profitability, we anticipate many of the factors affecting our results in the first nine months of 2018 will continue in the last quarter of 2018, while we continue to implement our improvement programs. We also have additional new program launches during the remainder of 2018 that may adversely affect overall results due to startup inefficiencies and the need for additional labor required to support these programs.

Plans to improve performance include programs for further hiring, training and retention of our workforce, adding further technical resources and outside consulting support, negotiating customer price increases, possible temporary or permanent move of business to other manufacturers and investments to increase and improve equipment capacity and reliability.

Results of Operations

Three Months Ended September 30, 2018, as Compared to Three Months Ended September 30, 2017

Net sales for the three months ended September 30, 2018 and 2017 totaled $64,676,000 and $38,494,000, respectively. Included in total sales were tooling project sales of $2,371,000 and $901,000 for the three months ended September 30, 2018 and 2017, respectively. These sales are sporadic in nature and fluctuate in regard to scope and related revenue on a period-to-period basis. Product sales, excluding tooling project sales, for the three months ended September 30, 2018 were approximately $62,305,000 compared to $37,593,000 for the same period in 2017. This increase in sales is primarily the result of new sales from the acquisition of Horizon Plastics totaling $14,823,000 and higher demand from truck customers of $9,994,000.

Gross margin was approximately 7.5% of sales for the three months ended September 30, 2018, compared with 14.9% for the three months ended September 30, 2017. The gross margin percentage decline was due to an unfavorable net change in product mix and manufacturing efficiency, primarily higher labor, scrap and overhead costs, of 13.0% and an unfavorable net change in selling price and material costs of 1.2%. The unfavorable changes were partially offset by a favorable 3.3% impact from the Horizon Plastics acquisition, higher fixed costs leverage of 3.2% related to increased sales and the impact of lower customer chargebacks of 0.3%.

Selling, general and administrative expense (“SG&A”) was $6,349,000 for the three months ended September 30, 2018, compared to $4,358,000 for the three months ended September 30, 2017. The increase in SG&A expense primarily resulted from additional ongoing SG&A costs of $1,067,000 related to Horizon Plastics, higher intangible amortization of $469,000, and higher costs from outside service and professional fees of $302,000.

Interest expense totaled $632,000 for the three months ended September 30, 2018, compared to interest expense of $62,000 for the three months ended September 30, 2017. The increase in interest expense was due to a higher average outstanding debt balance and higher interest rates during the three months ended September 30, 2018, when compared to the same period in 2017.

Income tax benefit for the three months ended September 30, 2018 was 14% of total loss before income taxes and income tax expense for the three months ended September 30, 2017 was 36% of total income before income taxes, respectively. The effective rate for the three months ended September 30, 2018 is a result of taxable income of $1,834,000 from the Company's Canadian and Mexican operations which has a combined effective rate of approximately 29%, combined with operating losses of $3,941,000 in the Company's United States facilities which has a lower effective rate of approximately 21%.


29

Table of Contents

The Company recorded a net loss for the three months ended September 30, 2018 of $1,803,000, or $(0.23) per basic and diluted share, compared with net income of $855,000, or $0.11 per basic and diluted share, for the three months ended September 30, 2017.

Comprehensive losses totaled $1,027,000 for the three months ended September 30, 2018, compared to comprehensive income of $703,000 for the same period ended September 30, 2017. The decrease was primarily related to lower net income of $2,658,000 offset by a change in unrealized foreign currency hedge gains of $796,000, net of tax, during the three months ended September 30, 2018.

Nine Months Ended September 30, 2018, as Compared to Nine Months Ended September 30, 2017

Net sales for the nine months ended September 30, 2018 and 2017 totaled $196,324,000 and $122,608,000, respectively. Included in total sales were tooling project sales of $9,081,000 and $11,885,000 for the nine months ended September 30, 2018 and 2017, respectively. These sales are sporadic in nature and fluctuate in regard to scope and related revenue on a period-to-period basis. Product sales, excluding tooling project sales, for the nine months ended September 30, 2018 were approximately $187,243,000 compared to $110,723,000 for the same period in 2017. This increase in sales is primarily the result of new sales from the acquisition of Horizon Plastics totaling $47,514,000 and higher demand from truck and marine customers of $29,882,000 and $1,306,000, respectively.

Gross margin was approximately 10.5% of sales for the nine months ended September 30, 2018, compared with 16.0% for the nine months ended September 30, 2017. The gross margin percentage decline was due to an unfavorable net change in product mix and manufacturing efficiency, primarily higher labor, scrap and overhead costs, of 8.1%, an unfavorable net change in selling price and material costs of 1.1% and an unfavorable impact of customer chargebacks of 0.7%. The unfavorable change was partially offset by a favorable 2.3% impact from the Horizon Plastics acquisition and higher fixed costs leverage of 2.1% related to the increase in sales.

Selling, general and administrative expense (“SG&A”) was $19,587,000 for the nine months ended September 30, 2018, compared to $12,450,000 for the nine months ended September 30, 2017. The increase in SG&A expense primarily resulted from additional ongoing SG&A costs of $2,714,000 related to Horizon Plastics, higher outside service and professional fees of $1,348,000, higher intangible amortization of $1,329,000, one-time acquisition fees of $1,289,000, and higher travel costs of $318,000.

Interest expense totaled $1,705,000 for the nine months ended September 30, 2018, compared to interest expense of $191,000 for the nine months ended September 30, 2017. The increase in interest expense was primarily due to a higher average outstanding debt balance and higher interest rates during the nine months ended September 30, 2018, when compared to the same period in 2017.
Income tax expense for the nine months ended September 30, 2018 is estimated to be $228,000 on a loss of $611,000 before income taxes. Net income tax expense for the nine months ended September 30, 2018 is a result of taxable income of $4,205,000 in the Company's Canadian and Mexican operations, which has a combined effective tax rate of approximately 29%, combined with operating loss of $4,816,000 in the Company's United States facilities, which has an effective tax rate of 21%. Income tax expense for the nine months ended September 30, 2017 was estimated to be $2,262,000, or approximately 32% of income before income taxes.

The Company recorded a net loss for the nine months ended September 30, 2018 of $839,000, or $(0.11) per basic and diluted share, compared with net income of $4,704,000, or $0.61 per basic and diluted share, for the nine months ended September 30, 2017.

Comprehensive loss totaled $299,000 for the nine months ended September 30, 2018, compared to comprehensive income of$4,956,000 for the same period ended September 30, 2017. The decrease was primarily related to lower net income of $5,543,000 offset by a change in unrealized interest rate swaps of $327,000, net of tax, during the nine months ended September 30, 2018.

Liquidity and Capital Resources

The Company’s primary sources of funds have been cash generated from operating activities and borrowings from third parties. Primary cash requirements are for operating expenses, increases in working capital, capital expenditures, repayment of long-term debt and business acquisitions. The Company from time to time will enter into foreign exchange contracts and interest rate swaps to mitigate risk of foreign exchange and interest rate volatility. As of September 30, 2018, the Company had outstanding foreign exchange contracts with notional amounts totaling $21,525,000, compared to $8,766,000 outstanding as of December 31, 2017.

30

Table of Contents

As of September 30, 2018, the Company also had outstanding interest rate swaps with notional amounts totaling $33,032,000, compared to none outstanding as of December 31, 2017.

Cash provided by operating activities for the nine months ended September 30, 2018 totaled $6,524,000. Net loss of $839,000 negatively impacted operating cash flows. Non-cash deductions of depreciation and amortization included in net loss amounted to $7,105,000. Changes in working capital decreased cash provided by operating activities by $716,000, which primarily related to increases in accounts receivable and inventory, offset by increases in accounts payable.

At September 30, 2018, the Company had no cash on hand, and an available balance on the revolving line of credit of $40,000,000. Subject to compliance with ongoing loan covenant requirements, management believes that cash flow from operating activities and available borrowings under the A/R Credit Agreement will be sufficient to meet the Company’s liquidity needs for the next 12 months.

Cash used in investing activities for the nine months ended September 30, 2018 was $67,218,000, which primarily related to the acquisition of Horizon Plastics totaling $62,457,000. The Company also had $4,761,000 related to purchases of property, plant and equipment. The Company anticipates spending up to $4,000,000 during the remainder of 2018 on property, plant and equipment purchases for all of the Company's operations.

At September 30, 2018, purchase commitments for capital expenditures in progress were $1,087,000. The Company anticipates using cash from operations and its available revolving line of credit to fund capital investments.

Cash provided by financing activities for the nine months ended September 30, 2018 totaled $33,914,000, which primarily consisted of new term loan borrowings of $45,000,000, offset by the payoff of a previous term loan of $6,750,000, and net scheduled repayments of principal on outstanding term loans of $2,531,000.
 
The Company is required to meet certain financial covenants included in the Credit Agreement with respect to leverage ratios and fixed charge ratios, as well as other customary affirmative and negative covenants. As of September 30, 2018, the Company was in compliance with its financial covenants. Should the Company not be in compliance with its loan covenants in the future management would likely seek a waiver of default, attempt to reset covenants or refinance existing obligations. If the Company were unable to obtain this relief, the outstanding obligations would be in default and become payable on demand which could have a material adverse effect on the Company. Additionally, the Company's liquidity and ability to obtain further financing to fund future operating and capital requirements could be negatively impacted.

Management regularly evaluates the Company’s ability to meet its debt covenants. These evaluations consider the Company’s forecasts, which are based on industry analysts’ estimates of heavy and medium-duty truck production volumes, customers' forecasts, current operating performance and expected future performance as well as other assumptions.

The Company’s results of operations have been negatively impacted by its operating performance during 2018. At current high demand levels, the Company has experienced extreme difficulty hiring, training and retaining labor in a tightening labor market and been faced with asset capacity and reliability constraints, which have resulted in higher manufacturing inefficiencies and the inability to consistently meet customer delivery and quality requirements. Company performance has been negatively impacted by additional expenses realized as a result of these inefficiencies and higher operating costs including increased hiring, training, wages, overtime, non-local third party contract labor, including travel and local lodging, scrap, rework, expedited premium shipping, customer charges, returns, repairs and maintenance, and raw material costs. If the Company's efforts are unable to improve financial performance, management believes it may not be able to meet its financial covenants and maintain compliance with its debt obligations for the next 12 months.

The Company is aggressively focused on financial improvement plans including further programs for hiring, training and retention of our workforce, adding further technical resources and outside consulting support, negotiating customer price increases, possible temporary or permanent move of business to other manufacturers and investments to increase and improve equipment capacity and reliability. We are diligently working to implement the changes necessary to improve and restructure our operations for long-term profitability.

Off-Balance Sheet Arrangements

The Company did not have any significant off-balance sheet arrangements as of September 30, 2018 or December 31, 2017.


31

Table of Contents

The Company did not have or experience any material changes outside the ordinary course of business as to contractual obligations, including long-term debt obligations, capital lease obligations, operating lease obligations, purchase obligations or other long-term liabilities reflected on the Company’s balance sheet under GAAP, as of September 30, 2018 or December 31, 2017.


Critical Accounting Policies and Estimates

For information on critical accounting policies and estimates, see Note 2 "Critical Accounting Policies and Estimates," to the consolidated financial statements included herein.

Recent Accounting Pronouncements
For information on the impact of recently issued accounting pronouncements, see Note 3 "Recent Accounting Pronouncements," to the consolidated financial statements included herein.

32

Table of Contents

Part I — Financial Information

Item 3.
Quantitative and Qualitative Disclosures About Market Risk
Core Molding Technologies’ primary market risk results from changes in the price of commodities used in its manufacturing operations. Core Molding Technologies is also exposed to fluctuations in interest rates and foreign currency fluctuations associated with the Mexican peso and Canadian Dollar. Core Molding Technologies does not hold any material market risk sensitive instruments for trading purposes. The Company may use derivative financial instruments to hedge exposure to fluctuations in foreign exchange rates and interest rates.
Core Molding Technologies has the following three items that are sensitive to market risks: (1) Revolving Loans and Term Loans under the Amended and Restated Credit Agreement, some of which bear a variable interest rate; (2) foreign currency purchases in which the Company purchases Mexican pesos and Canadian dollars with United States dollars to meet certain obligations; and (3) raw material purchases in which Core Molding Technologies purchases various resins and fiberglass for use in production. The prices and availability of these materials are affected by the prices of crude oil, natural gas and other feedstocks as well as processing capacity versus demand.
Assuming a hypothetical 10% change in short-term interest rates, interest paid on the Term Loan would have been impacted, as the interest rate on these loans is based upon LIBOR. It would not, however, have a material effect on earnings before tax.
Assuming a hypothetical 10% decrease in the United States dollar to Mexican peso and Canadian dollar exchange rate, the Company would be impacted by an increase in operating costs, which would have an adverse effect on operating margins.
Assuming a hypothetical 10% increase in commodity prices, Core Molding Technologies would be impacted by an increase in raw material costs, which would have an adverse effect on operating margins.

33

Table of Contents

Part I — Financial Information

Item 4.
Controls and Procedures
As of the end of the period covered by this report, the Company has carried out an evaluation, under the supervision and with the participation of its management, including its Chief Executive Officer and its Chief Financial Officer, of the effectiveness of the design and operation of its disclosure controls and procedures (as defined in Rule 13a-15(e) of the Exchange Act). Based upon this evaluation, the Company’s management, including its Chief Executive Officer and its Chief Financial Officer, concluded that the Company’s disclosure controls and procedures were (i) effective to ensure that information required to be disclosed in the Company’s reports filed or submitted under the Exchange Act was accumulated and communicated to the Company’s management, including its Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure, and (ii) effective to ensure that information required to be disclosed in the Company’s reports filed or submitted under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the Securities and Exchange Commission’s rules and forms.

34

Table of Contents

Part II — Other Information
Item 1.
Legal Proceedings
From time to time, the Company is involved in litigation incidental to the conduct of its business. The Company is presently not involved in any legal proceedings which in the opinion of management are likely to have a material adverse effect on the Company's consolidated financial position or results of operations.

Item 1A.
Risk Factors

In addition to the other information set forth in this Report, you should carefully consider the risk factors disclosed in Item 1A of our Annual Report on Form 10-K for the fiscal year ended December 31, 2017 (the “Form 10-K”), as supplemented by the following risk factors, which describe various risks that may affect our business, financial condition and operations. References to “we,” “us,” and “our” in this “Risk Factors” section refer to Core Molding Technologies and its subsidiaries, unless otherwise specified or unless the context otherwise required. No other material change in the risk factors discussed in the Form 10-K, as supplemented by this Form 10-Q, has occurred. Such risk factors do not identify all risks that we face because our business operations could also be affected by additional factors that are not presently known to us or that we currently consider to be immaterial to our operations.

Our manufacturing capacity, labor force and operations may not be appropriate for future levels of demand and may materially adversely affect our gross margins and operating results.

When market demand increases, we must have available manufacturing capacity and must increase our labor force to meet increases in customer demand. We have continued to experience a significant ramp up in overall demand in the heavy-duty truck market, along with the launch of several new programs. Given the current high demand levels, the Company has experienced asset capacity constraints and difficulty hiring, training and retaining labor in a tightening labor market, which has resulted in increased manufacturing inefficiencies and the inability to consistently meet customer delivery and quality requirements, including for several of the Company’s major customers. Additional expenses that we have realized in 2018 as a result of these inefficiencies include increased hiring, training, wages, overtime, non-local third party contract labor, including travel and local lodging, scrap, rework, expedited premium shipping, returns, customer charges and repairs and maintenance.

If we continue to experience manufacturing inefficiencies, we may continue to incur additional expenses as described above and may reduce demand through the possible temporary or permanent move of business (which may include major customers’ business) to other manufacturers, which would adversely affect our gross margins and operating results.

Ongoing difficulty in hiring, training and retaining skilled labor could result in increased cost overruns, an inability to satisfy customer demands and otherwise adversely affect our business.

We depend on skilled labor in the manufacture of our products.  Given the current high demand levels in 2018, we have experienced difficulty hiring, training and retaining labor in a tightening labor market, which has resulted in increased manufacturing inefficiencies and the inability to consistently meet customer delivery and quality requirements, including for several of the Company’s major customers.  Recent difficulties in securing skilled labor have resulted in increased hiring and training costs and increased overtime to meet demand, increased wage rates to attract and retain operators, the use of non-local third party contract labor and higher scrap and rework costs due to inexperience workers.  Continuation of such difficulties in securing labor could result in increased cost, an inability to satisfy customer demands, and an inability to maintain or increase production rates which would adversely affect our business.

In the event we engage in any restructuring of our manufacturing operations to address operational efficiencies, such actions may be disruptive to our business and may not result in anticipated cost savings.

Management continuously evaluates our facilities and operations in an effort to make our business more efficient. During 2018, we have continued to experience asset capacity constraints and difficulty hiring, training and retaining labor in a tightening labor market, which has resulted in increased manufacturing inefficiencies and the inability to consistently meet customer delivery and quality requirements, including for several of the Company’s major customers. As management continues to evaluate our facilities and operations in an effort to make our business more efficient, as well as whether to move certain customers’ business in order to minimize production constraints, we may incur additional costs, asset impairments and restructuring charges in connection with changes to operations, that to the extent incurred in the future could adversely affect our future earnings and cash flows. Such actions may be disruptive to our business. Furthermore, we may not realize the cost savings that we expect to realize as a result of such actions.

35

Table of Contents

Item 2.
Unregistered Sales of Equity Securities and Use of Proceeds

None
 
Item 3.
Defaults Upon Senior Securities
None.

Item 4.
Mine Safety Disclosures
None.

Item 5.
Other Information

None.

Item 6.     Exhibits

See Index to Exhibits.



36

Table of Contents

SIGNATURES
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.
 
 
CORE MOLDING TECHNOLOGIES, INC.
Date:
November 9, 2018
By:
/s/ David L. Duvall
 
 
 
 
David L. Duvall
 
 
 
 
President, Chief Executive Officer, and Director 
 
 
 
 
 
 
 
 
 
 
Date:
November 9, 2018
By:
/s/ John P. Zimmer
 
 
 
 
John P. Zimmer
 
 
 
 
Vice President, Secretary, Treasurer and Chief Financial Officer
 
 
 
 
 



37

Table of Contents

INDEX TO EXHIBIT
Exhibit No.
 
Description
 
Location
 
 
 
 
 
2(a)(1)
 
Asset Purchase Agreement dated as of September 12, 1996, as amended October 31, 1996, between Navistar and RYMAC Mortgage Investment Corporation1
 
 
 
 
 
 
2(a)(2)
 
Second Amendment to Asset Purchase Agreement dated December 16, 19961
 
 
 
 
 
 
2(b)(1)
 
Agreement and Plan of Merger dated as of November 1, 1996, between Core Molding Technologies, Inc. and RYMAC Mortgage Investment Corporation
 
 
 
 
 
 
2(b)(2)
 
First Amendment to Agreement and Plan of Merger dated as of December 27, 1996 between Core Molding Technologies, Inc. and RYMAC Mortgage Investment Corporation
 
 
 
 
 
 
2(c)
 
Asset Purchase Agreement dated as of October 10, 2001, between Core Molding Technologies, Inc. and Airshield Corporation
 
 
 
 
 
 
2(d)
 
Asset Purchase Agreement dated as of March 20, 2015, between Core Molding Technologies, Inc and CPI Binani, Inc.
 
 
 
 
 
 
2(e)
 
Asset Purchase Agreement dated as of January 16, 2018 between 1137952 B.C. Ltd., Horizon Plastics International, Inc., 1541689 Ontario Inc., 2551024 Ontario Inc., Horizon Plastics de Mexico, S.A. de C.V., and Brian Read
 
 
 
 
 
 
3(a)(1)
 
Certificate of Incorporation of Core Molding Technologies, Inc. as filed with the Secretary of State of Delaware on October 8, 1996
 
 
 
 
 
 
3(a)(2)
 
Certificate of Amendment of Certificate of Incorporation of Core Molding Technologies, Inc. as filed with the Secretary of State of Delaware on November 6, 1996
 
 
 
 
 
 
3(a)(3)
 
Certificate of Amendment of Certificate of Incorporation as filed with the Secretary of State of Delaware on August 28, 2002
 
 
 
 
 
 
3(a)(4)
 
Certificate of Designation, Preferences and Rights of Series A Junior Participating Preferred Stock as filed with the Secretary of State of Delaware on July 18, 2007
 
 
 
 
 
 
3(a)(5)
 
Certificate of Elimination of Series A Junior Participating Preferred Stock, as filed with the Secretary of State of the State of Delaware on April 2, 2015.
 
 
 
 
 
 
3(b)
 
Amended and Restated By-Laws of Core Molding Technologies, Inc.
 
 
 
 
 
 
3(b)(1)
 
Amendment No. 1 to the Amended and Restated By-Laws of Core Molding Technologies, Inc.
 
 
 
 
 
 
4(a)(1)
 
Certificate of Incorporation of Core Molding Technologies, Inc. as filed with the Secretary of State of Delaware on October 8, 1996
 
 
 
 
 
 

38

Table of Contents

Exhibit No.
 
Description
 
Location
4(a)(2)
 
Certificate of Amendment of Certificate of Incorporation of Core Molding Technologies, Inc. as filed with the Secretary of State of Delaware on November 6, 1996
 
 
 
 
 
 
4(a)(3)
 
Certificate of Amendment of Certificate of Incorporation as filed with the Secretary of State of Delaware on August 28, 2002
 
 
 
 
 
 
4(a)(4)
 
Certificate of Designation, Preferences and Rights of Series A Junior Participating Preferred Stock as filed with the Secretary of State of Delaware on July 18, 2007
 
 
 
 
 
 
4(a)(5)
 
Certificate of Elimination of Series A Junior Participating Preferred Stock, as filed with the Secretary of State of the State of Delaware on April 2, 2015
 
 
 
 
 
 
10(a)
 
Amend and Restated Credit Agreement dated January 16, 2018, among Core Molding Technologies, Inc., 1137925 B.C. Ltd., the Lenders Named Therein, KeyBank National Association and KeyBanc Capital Markets Inc.
 
 
 
 
 
 
10(b)
 
2006 Core Molding Technologies, Inc. Long Term Equity Incentive Plan as amended and restated effective May 12, 2017

 

 
 
 
 
 
10(c)
 
Separation Agreement entered into with Robert P. Price dated August 17, 2018
 
 
 
 
 
 
11
 
Computation of Net Income per Share
 
 
 
 
 
 
31(a)
 
Section 302 Certification by David L. Duvall, President, Chief Executive Officer, and Director
 
 
 
 
 
 
31(b)
 
Section 302 Certification by John P. Zimmer, Vice President, Secretary, Treasurer, and Chief Financial Officer
 
 
 
 
 
 
32(a)
 
Certification of David L. Duvall, Chief Executive Officer of Core Molding Technologies, Inc., dated November 9, 2018, pursuant to 18 U.S.C. Section 1350
 
 
 
 
 
 
32(b)
 
Certification of John P. Zimmer, Chief Financial Officer of Core Molding Technologies, Inc., dated November 9, 2018, pursuant to 18 U.S.C. Section 1350
 
 
 
 
 
 
101.INS
 
XBRL Instance Document
 
Filed Herein
 
 
 
 
 
101.SCH
 
XBRL Taxonomy Extension Schema Document
 
Filed Herein
 
 
 
 
 
101.CAL
 
XBRL Taxonomy Extension Calculation Linkbase
 
Filed Herein
 
 
 
 
 
101.LAB
 
XBRL Taxonomy Extension Label Linkbase
 
Filed Herein
 
 
 
 
 
101.PRE
 
XBRL Taxonomy Extension Presentation Linkbase
 
Filed Herein
 
 
 
 
 
101.DEF
 
XBRL Taxonomy Extension Definition Linkbase
 
Filed Herein

1.
The Asset Purchase Agreement, as filed with the Securities and Exchange Commission as Exhibit 2-A to Registration Statement on Form S-4 (Registration No. 333-15809), omits the exhibits (including the Buyer Note, Special Warranty Deed, Supply

39

Table of Contents

Agreement, Registration Rights Agreement and Transition Services Agreement identified in the Asset Purchase Agreement) and schedules (including those identified in Sections 1, 3, 4, 5, 6, 8 and 30 of the Asset Purchase Agreement). Core Molding Technologies, Inc. will provide any omitted exhibit or schedule to the Securities and Exchange Commission upon request.

40